yesallevent 
Nowadays, there are so many products of xbox 360 water cooling kit in the market and you are wondering to choose a best one. You have searched for xbox 360 water cooling kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings xbox 360 water cooling kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Cougar Helor CPU Liquid Cooling with Addressable RGB, Core Box v2 and a Remote Controller (360)
- The Perfect Water Block: Durable and Convenient
- Dynamic RGB Lighting: The Addressable LEDs in the water block and the fans provide a memorable lighting spectacle that will raise your computer to the category of an art piece.
- Motherboard Synchronization + Core Box v2: Two ways to control this RGB powerhouse: with the included Core Box v2 and a remote controller, you have access to 100 preset RGB lighting effects. Through 3-pin 5v RGB motherboard synchronization, you can enjoy system-wide RGB effects!
- Performance First: Incredible Fans: Fan blades 16% longer than those of normal RGB fans and an ultra-broad speed range from 600 to 1800 R.P.M meet a powerful RGB backlight system to create the perfect cooling device.
- Sleeved and Extended Tubing: Helor Series’ sleeved and extended tubing is prepared to perform at the highest level for years while keeping evaporation under control.
Cougar’s helot liquid cooling series is the perfect solution for gamers who require powerful CPU cooling with astounding visuals.
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W243-CU12SW-A
- Analog/digital lighting Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- C pro fittings build like a Pro with a new take on compression fittings. Engineered with four Built in O rings to provide maximum leak prevention and a secured compression seal
- Exclusive components W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC hard tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six C-Pro G14 PETG 16mm OD compressions, eight v-Tobler PETG tubes, an a RGB LED controller, and other accessories. p/N: cl-w243-cu12sw-adimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific C-Pro G14 PETG 16mm OD compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1tube- V-Tobler PETG tube 16mm OD 500mm x 8accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1- silicone insert x1. Do not let the pump run dry, when there is no liquid entering the pump turn off your power immediately
Similar items with 4 stars and above
EKWB EK-KIT Performance Series PC Watercooling Kit P360
- Universal CPU water block: EK-Supremacy EVO (incl. LED diode, mounting- & thermal material)
- Water pump-reservoir combo: EK-XRES 140 Revo D5 PWM (incl. pump)
- Radiator: EK-CoolStream PE 360 (Triple)
- Compression fittings: EK-ACF Fitting 10/13mm (3/8” – 1/2”) – G1/4 Nickel (6 pcs)
- Radiator fan: EK-Vardar F3-120 (1850rpm) (3pcs)
The EK-KIT P360 is the ultimate liquid cooling kit dedicated to all users who seek the easiest way to start with their first custom loop at the best price-performance ratio on the market! Everything you need to assemble your first custom loop with carefully chosen components that will last you a long time!This water cooling kit is compatible with the following CPU sockets: Intel LGA-1150/1151/1155/1156, Intel LGA-2011(-3), Intel LGA-2066, AMD Socket AM4.
Model: 3831109863473
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator Soft Tube Water Cooling Kit CL-W253-CU12SW-A
- Analog/digital lighting – Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All includded – the C360 soft tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator – the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- Exclusive components – W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15-ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1
Similar items with 4 stars and above
CORSAIR HYDRO Series H115i PRO RGB AIO Liquid CPU Cooler,280mm, Dual ML140 PWM Fans, Intel 115x/2066, AMD AM4
- Dynamic Multicolor RGB Lighting: Vibrant RGB LED pump head produces vivid lighting effects to match your build
- Powered by Magnetic Levitation: Three low noise 140mm ML Series magnetic levitation PWM fans deliver incredible airflow and produce just 25 dB of noise at full speed
- Powerful Software: CORSAIR iCue software allows you to adjust RGB lighting, individual fan speeds, and pump speed while monitoring CPU and coolant temperatures
- Zero RPM Mode: Zero RPM cooling profile in CORSAIR iCue software allows fans to stop entirely at low temperatures, eliminating fan noise
- Compatible Sockets: Intel LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011 3, 2066 and AMD AM2, AM3, AM4, FM1, FM2
Eathtek Replacement Internal Cooling Fan Heat Sink Cooler For XBOX 360 Slim series
- Compatible Model Numbers: XBOX 360 Slim
- Replacement and high quality,Replace your faulty, cracked or broken fan.
- Each fan is tested before shipping
- All pictures are taken from the real item, please check carefully before bidding.
- Notes: The fans are produced by Forcecon,ADDA,Sunon,Kipo or any other manufacturers,you may receive any depending on the stocks.
Please check the pictures and description carefully before bidding.
Description:
Compatible with XBOX 360 Slim series.
Package content:
1¡Á Fan
Cooling Fan for XBox 360 Slim, USB Cooler External Side Heat Exhauster Cooling Fan for Xbox 360 Slim Console-Black
- Applicable Model: Mini cooling fan cooler for Microsoft Xbox 360 Slim console.
- Multifunction Fan: Attaches perfectly for both vertical and horizontal system orientation through the sucker.
- Unique Design: Small and lightweight, innovative in design and attractive in appearance.
- Convenient to Use: Just insert & stick this fan onto cooling vent and it begins to accelerate heat dissipation for your console after powered. Make the original fan system work better.
- Charging Way: Powered by USB port of for Xbox 360 console (USB Cable Included).
Description:
This cooling fan is developed for Xbox 360 slim console. It can accelerate the air circulation of your console cooling system through the high power fan inside the product to protect your console from high temperature effect. Ideal for XBOX 360 slim console game players.
Specifications:
Compatible model: For XBOX 360 Slim
Input Voltage: DC 5V
Rated Current: 0.34A ±10%
Rotational Speed: 2300r/min ±10%
Power supply: Powered by USB Cable
Length of USB cable: Approx. 50cm / 20inch
Color: Black
Material: ABS
Product dimensions: 158.2 x 124.5 x 33mm / 6.2 x 4.9 x 1.3inch
Package weight: 187g
Package List:
1 x Cooling Fan
1 x USB Cable
NZXT Kraken X72 360mm – All-in-One RGB CPU Liquid Cooler – Infinity Mirror Design – Powered by CAM
- ADVANCED LIGHTING MODES: With an infinity mirror design, add amazing color and lighting to your CPU cooler for a fully dynamic lighting experience
ENGINEERED FOR PERFORMANCE: Engineered to achieve superior cooling while keeping noise levels to a minimum - MASTER YOUR CONTROL: Using CAM, manage the performance with precision and make changes quickly, using the desktop or mobile app. You can even monitor pump speed and liquid temperature.
- ALL-NEW RADIATOR FANS: The Aer P radiator fans included are designed for liquid-cooling perfection
- providing silent operation, durability, and powerful cooling performance
- REINFORCED EXTENDED TUBING: Fine nylon sleeves are added to strengthen the rubber tubing and act as a protective layer, shielding your Kraken cooler tubes from potential damage during handling
- WARRANTY: 6 Years
2017 Newest Full Body Game Controller Case Protective Cover Shell + Button Kits for XBox 360 Black
Wireless Controller Full Case Shell Cover + Buttons for XBox 360 Black
Introduction:
This product is for a full complete replacement shell for the Microsoft Xbox 360 wireless controller. Turn your controller into another color at a fraction of the cost. Easy to install yourself – all you need is about 15 minutes and a torx screwdriver(not included). Made from the highest quality materials and durable ABS plastic carbonates, as well as patented acrylic paint.
Features:
1. All buttons and a battery cover are included
2. Hard case made with High Quality Materials will stand up to damage
3. Give your controller a much Newer and Brighter look with a new case
4. Easy to install, assembly in just minutes, work exactly the same as the original shell
5. Perfectly fit Your Precious XBOX 360 Wireless Controller
6. Replace your damaged or defective XBOX 360 Wireless Controller original casing, makes it look new all the time
7. You can DIY your own wireless controller
Specifications:
Color: Black
Included: Controller shell case, Analog Stick, Bumpers, Buttons, etc (As show in the picture)
Platform (Compatible with): XBOX 360
Dimension: 155 * 115 * 50mm
Net weight: 113g
Note:
You may need a T8 Security Screwdriver to install it.
Package Content:
1 x Black Wireless Controller Full Shell Case (a complete set)
1 x Black wireless controller full shell case (a complete set)
Compatible Brand/Model: None
Model Number: Game Controller Case Protective Cover for XBox 360
is_customized: Yes
model: 104708
Unit Type: piece
Package Weight: 0.25kg (0.55lb.)
Package Size: 18cm x 26cm x 18cm (7.09in x 10.24in x 7.09in)
OrigiRay New Tools Kits for 8 Pieces Unlock Open Opening Tool Repair Disassemble Kit Set for Xbox 360
Every tool you will ever need to cleanly open the XBox 360 Slim console — and they are all thick and high quality tools. This is for the pros!!! If you are opening XBox 360 Slim consoles on a regular basis, this will make your life so much easier!!! The L shaped tool is used to open the T10 screws so that you can lift the case off. The other side of the L shaped tool is a T8 screwdriver. The other tools are various lengths to get the clips of the XBox 360 Slim apart easily and cleanly!
Yes there are other ways to open your XBox 360 Slim — and there are other tool sets — but you will thank yourself for spending the money for this!!! Especially if you are doing this regularly!
Features:
Professional opening tool set for Xbox 360 Slim
Portable and ergonomic design for practical and convenient to use
8 piece kit to ensure you have the right tool for the right job
Complete kit to disassemble Xbox360 Slim easily
Material: Stainless steel
Specification
Type : Tool Kits
Model : Xbox 360 S
Platform: Microsoft Xbox 360
Package Weight: 109g
Package Size: 19 X 6.7 X 1.5cm
Size:
A: 15*1.5*0.2CM
B: 12.4*1.5*0.2CM
C: 15.7*1.5*0.2CM
D: 12.9*1.5*0.2CM
E: 8.6*1.5*0.2CM
1 x Opening Tool Kit for Xbox 360 Slim (8pcs)
0.0
Compatible Brand/Model: None
With USB: No
Model Number: Repair Disassemble Kit Set For XBOX 360
is_customized: yes
Model Type : Xbox 360 S Tool Kits
Model Number: 93107
Unit Type: piece
Package Weight: 0.2kg (0.44lb.)
Package Size: 16cm x 11cm x 6cm (6.30in x 4.33in x 2.36in)
Conclusion
By our suggestions above, we hope that you can found xbox 360 water cooling kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
