Best Water Cooling Quick Disconnect
Nowadays, there are so many products of water cooling quick disconnect in the market and you are wondering to choose a best one. You have searched for water cooling quick disconnect in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water cooling quick disconnect which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Alphacool 17281 Eiszapfen Quick Release Connector kit G1/4 Inner Thread – Chrome Water Cooling Fittings
Alphacool’s new quick couplers with the name “Eiszapfen” are the next block in the “Eis” series. High quality and impressive features makes any watercooling system back to a piece of high-quality and practical! A quick coupling is used everywhere where expandability, flexibility and cleanness play an important role. These compact couplings have a 1/4 “thread on both sides with which they are compatible with all standard connections. By pulling down the outer ring these couplings can be disconnected. Both sides close immediately completely tight so that no water can escape. Thanks to the special N.D.S.L. Technology (no drip, no splash, no leak) a leak, drip or splash out of the water on opening the lock is excluded. By assembling again, both sides must click into each other audibly and shut themselves tightly by a double O-ring, which is simply compressed when plugged together. Likewise, the mechanism was designed for durability to ensure a secure connection even years. Many quick couplings usually also affect the flow rate. But Alphacool has found a way to resolve this issue. A high flow rate is maintained at these quick couplings! Alphacools quick couplers are available in two finishes. In deep black and fully chromed these add seamlessly on every system. Technical Details: Dimensions (L x D): 64,6 x 23,9mm Material: Brass Colour: Chrome Thread: 2x 1/4” internal thread Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit G1/4 inner thread – Chrome
Alphacool 17223 HF Quick Release Connector kit G1/4 Inner Thread – Deep Black Water Cooling Fittings
Alphacool HF quick release connector with bulkhead G1 / 4 IG – Chrome Alphacool’s new quick-release coupling sets have been newly developed to offer extra security. For this reason, these couplings do not use a “click” mechanism but are bolted with a nut. The couplings can be no longer accidentally unlocked. The couplings do not affect the flow rate of your loop. When unlocking both sides of the coupling sealed completely. They have a ¼” internal thread on both sides so your choice of fitting can be used. Technical specifications: Dimensions (L x D): 60.3 x 26,1mm Material: brass black Thread: 2x 1/4 ” Scope of supply: 1x Alphacool HF quick release connector kit G1/4 inner thread – Deep Black
Bitspower Quick Disconnect Male to 1/2" ID, 3/4" OD Compression Fitting for Soft Tubing, CC5 Ultimate, Rotary, Silver Shining
Bitspower Quick-Disconnect fitting for easy and convenient component detachment. Model: BP-QDMRCPF-CC5U.
Similar items with 4 stars and above
Barrow G1/4" Quick Disconnect Set (2017 Model), Blue
Barrow G1/4″ Quick Disconnect Set (2017 Model) with both Male and Female components. G1/4″ fittings attach to the two female G1/4″ ports.
Model: TZKMF-V2
Similar items with 4 stars and above
Koolance QD3-FS10X16-BK QD3 Female Quick Disconnect No-Spill Coupling, Compression for 10mm x 16mm (3/8in x 5/8in) *Black*
- Koolance patented quick disconnect no-spill coupling with automatic shutoff.
- 10mm (3/8in) ID, 16mm (5/8in) OD female straight connection with compression fitting.
- It will only fit a Koolance QD3 male quick disconnect.
- After pulling the ring on the female QDC side, the quick-disconnect fittings will separate.
- Liquid on both sides will be automatically obstructed with approximately 0.2ml freed.
Koolance patented quick disconnect no-spill coupling with automatic shutoff. 10mm (3/8in) ID, 16mm (5/8in) OD female straight connection with compression fitting. It will only fit a Koolance QD3 male quick disconnect.
After pulling the ring on the female QDC side, the quick-disconnect fittings will separate. Liquid on both sides will be automatically obstructed with approximately 0.2ml freed. Coolant volume lost upon disconnection will rise with internal pressure higher than 0.5kgf/cm2 (7psi).
Additional Specifications
• Materials: Brass, Stainless Steel, EPDM
• Max Temperature: 100°C (212°F)
• Max Pressure @ 25°C: 8kgf/cm2 (113.8psi)
Alphacool 17225 HF Quick Release Connector kit with Bulkhead G1/4 Inner Thread – Deep Black Water Cooling Fittings
Alphacool HF quick release connector with bulkhead G1 / 4 IG – Chrome Alphacool’s new quick-release coupling sets have been newly developed to offer extra security. For this reason, these couplings do not use a “click” mechanism but are bolted with a nut. The couplings can be no longer accidentally unlocked. The couplings do not affect the flow rate of your loop. When unlocking both sides of the coupling sealed completely. They have a ¼” internal thread on both sides so your choice of fitting can be used. Technical specifications: Dimensions (L x D): 63.9 x 26,1mm Material: brass black Thread: 2x 1/4 ” Diameter bulkhead thread: 16mm Schott Thread Length: 15mm Scope of supply: 1x Alphacool HF quick release connector with bulkhead G1 / 4 IG – brass black
Bitspower Quick Disconnect Female to 1/2" ID, 3/4" OD Compression Fitting for Soft Tubing, CC5 Ultimate, Rotary, Matte Black
Bitspower Quick-Disconnect fitting for easy and convenient component detachment. Model: BP-MBQDFRCPF-CC5U.
Similar items with 4 stars and above
Alphacool 17282 Eiszapfen Quick Release Connector kit G1/4 Inner Thread – Deep Black Water Cooling Fittings
Alphacool’s new quick couplers with the name “Eiszapfen” are the next block in the “Eis” series. High quality and impressive features makes any watercooling system back to a piece of high-quality and practical! A quick coupling is used everywhere where expandability, flexibility and cleanness play an important role. These compact couplings have a 1/4 “thread on both sides with which they are compatible with all standard connections. By pulling down the outer ring these couplings can be disconnected. Both sides close immediately completely tight so that no water can escape. Thanks to the special N.D.S.L. Technology (no drip, no splash, no leak) a leak, drip or splash out of the water on opening the lock is excluded. By assembling again, both sides must click into each other audibly and shut themselves tightly by a double O-ring, which is simply compressed when plugged together. Likewise, the mechanism was designed for durability to ensure a secure connection even years. Many quick couplings usually also affect the flow rate. But Alphacool has found a way to resolve this issue. A high flow rate is maintained at these quick couplings! Alphacools quick couplers are available in two finishes. In deep black and fully chromed these add seamlessly on every system. Technical Details: Dimensions (L x D): 64,6 x 23,9mm Material: Brass Colour: Deep Black Thread: 2x 1/4” internal thread Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit G1/4 inner thread – Deep Black
Thermaltake Pacific QC1 Chrome Quick Connector for PC Water Cooling Configurations (CL-W029-CU00SL-A)
Thermaltake introduces the Pacific Series Fittings QC1 quick connector for the ultimate in custom PC water cooling configurations. Finished in chrome-plated copper, the non-spill quick connector fitting allows users to connect/disconnect a line without coolant spillage with the mating valves design for easier tube routing or dual loop build. Thermaltake fittings provide a complete solution for DIY enthusiasts and modders by giving users ideal mounting, fitting and flow.
Conclusion
By our suggestions above, we hope that you can found water cooling quick disconnect for you.Please don’t forget to share your experience by comment in this post. Thank you!