yesallevent 
Nowadays, there are so many products of small solar hot water pump in the market and you are wondering to choose a best one. You have searched for small solar hot water pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings small solar hot water pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
37,256 Reviews Scanned
bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female
- Power source: DC 12V(POWER ADAPTER INCLUDED). Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement or full refund without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Circulation pump is non-self-priming pump (0 Suction Height).
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI). This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Please note: If you use this pump for circulating wort it should be cleaned out after using it.
Item included:
1x DC 12V Solar Hot Water Circulation Pump
1x AC 110V- 240V to DC 12V 2A Power Supply Adapter
bayite BYT-7A006 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
BACOENG 3/4” 110V/115V Hot Water Circulation Pump/Circulator Pump For Solar Heater System With US Plug
- Flexible Application – Directly Used in Floor Heating System and Hot Water Recirculating System. Also a Wise Choice for DIY: Add a timer to be more energy saving. Add a bridge valve to be used in no return pipe system.
- SMART Connector: 5.5 Ounces Lead-Free Brass Fitting. Smart Design Shortens the setup or disassembly time to within 10 seconds. 1/2″ Deep Thread prevent the Tube from leaking.
- FEATURES: Built-in high sensitive electronic sensors with three-speed control. High temperature resistance. Super silent, environment friendly.
- Material: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial
- Rated Power:93/67/46W Inlet/Outlet:3/4” Voltage/Frequency:115V/60HZ Installation length:5.1inches Liquid temperature range:32 – 230℉
Happybuy RS15-6 Hot Water Recirculating Pump 110V Circulation Pump 3/4-Inch NPT 3-speed Recirculation Pump 9.5 Gpm for Water Heater System
- 【MAIN PARAMETER】 – The hot water circulation pump features NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia
- 【CONVENIENT】 – Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction)
- 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- 【ADVANTAGE】 – The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas
- 【WIDE APPLICATION】 – Our hot water circulation pump RS15-6 is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
bayite BYT-7A014 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Package included:
1x bayite DC 12V Circulation Water Pump(NO POWER ADAPTER INCLUDED)
KOLERFLO 3/4 Inch Hot Water Circulating Pump 3-Speed Circulation Water Pump for Solar Heater System(RS15-6 Red)
- Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
- Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
- Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
- KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
Product Details
Model: RS15-6
Rated Power: 93/67/46W
Outlet: 3/4 inch
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz
Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control
Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm
Similar items with 4 stars and above
BACOENG 3/4" 110V NPT Hot Water Circulation Pump Circulating Pump For Solar Heater Circulator US Plug
- 1. Rated Power:93/67/46W Inlet/Outlet:3/4″NPT Voltage/Frequency: 110V/60HZ
- 2. Super silent, environmental protection, aesthetics, ease of installation.
- 3. Built-in high sensitive electronic sensors with three-speed control.
- 4. Material for Pump housing:STAINLESS STEEL
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial
- 5.High temperature resistance, anti-fraying ,high efficiency, high flow,leak-tightness, low consumption
Similar items with 4 stars and above
bayite BYT-7A014A DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(Comes with a AC 110v to DC 12v power adapter), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Item included:
1x bayite DC 12V Circulation Water Pump
1x AC 110v to DC 12v power adapter
S5-15PV-SS – 3 GPM – Food Grade – 12V Solar Hot Water Pump – Can be run by a 15W solar panel
Made especially for the high temperatures & high pressures generated by solar hot water systems. The plastic housing is built with special plastics and the metal fittings are molded into the plastic housing. It has also become a very popular pump with beer brewing enthusiast!
Conclusion
By our suggestions above, we hope that you can found small solar hot water pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
