yesallevent 
Nowadays, there are so many products of refrigerator thermometer controller norco in the market and you are wondering to choose a best one. You have searched for refrigerator thermometer controller norco in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings refrigerator thermometer controller norco which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Refrigerator or Freezer Thermostat (Temperature Controller)
With the thermostat control you can turn any freezer or refrigerator into a sophisticated lagering device and more accurately control the temperature of your ales. Simply place the temperature probe into the freezer, plug the thermostat into the outlet and then your freezer into the Control. This thermostat has a range from 30 degrees F to 80 degrees F.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling
- [Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- [Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- [Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Specification:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±1°F (-58~160°F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Warranty: 1 Year
Package Included:
1 x Temperature and Time Controller
1 x Manual
Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
Conclusion
By our suggestions above, we hope that you can found refrigerator thermometer controller norco for you.Please don’t forget to share your experience by comment in this post. Thank you!
