yesallevent 
Nowadays, there are so many products of refrigerator power loss in the market and you are wondering to choose a best one. You have searched for refrigerator power loss in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings refrigerator power loss which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
The Body Reset Diet Cookbook: 150 Recipes to Power Your Metabolism, Blast Fat, and Shed Pounds in Just 15 Days
USP (United Security Products) USPLS USP Power Loss Sensor
USP PLS Power Loss Sensor – Detects Loss of Power (110VAC) – Dry Contact Output, SPDT
Power Failure Alarm [PFA-1]
Power fail alarm continuously monitors 120V AC power outlets and if there is an interruption, the LED flashes and a 102dB beeping alarm sounds to let you know. The alarm can be silenced by pushing the green button. A selectable "snooze alarm" feature will cause the alarm to come back every 30 minutes until power is restored. Will alarm for 72 hours straight with the supplied Lithium battery. The only power failure device with plug detection; if your plug becomes unplugged from the power fail alarm itself, this is detected electrically and the alarm sounds. Simple installation, just pop in the (included) long-life lithium battery. After that you are protected for the next 10 years. Very loud beeping audio buzzer – 103dB at 2 ft will never be missed even in noisy factories. Extremely low power consumption allows the lithium battery to last up to 10 years. After that time, if battery power is low due to excessive alarming time, a low-battery warning alarm sounds for many weeks. Selectable modes so it can detect millisecond blips, (useful for computer equipment) or only report power outages longer than 10 seconds. Convenient passthrough receptacle. Includes a secure screw-mounting tab for critical process monitoring equipment, freezers, heaters, pumps, fans and more.
Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun -58℉~ 716℉ (-50℃ ~ 380℃), Yellow and Black
- BETTER ACCURACY: The Distance to Spot Ratio is 12:1, meaning the Lasergrip 774 can accurately measure targets at greater distances compared to most other IR Thermometers
- For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36cm)
- TARGET QUICKER: Measure surface temperature ranging from -58℉~ 716℉ / -50℃ ~ 380℃, you can choose the unit from ℉ / ℃
- Response time: ≤500Ms
- A built in Laser gives you the precision to hone in on the exact space you want to measure
- ADDED FUNCTIONS: The LCD screen is backlit, also has an Auto-Off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
- VERSATILE DESIGN: Infrared Technology makes this thermometer handy to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points
- Use it when you are cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks
- NOTE: The thermometer can’t measure the internal temperature of an object
- Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct
- FDA, FCC, CE approved
- Class 2 laser, optical power 0.5-0.9mW
- 1 year warranty (with the option to extend it by 1 extra year for free) by Etekcity
Reliance Control Corporation POWER FAIL LIGHT W/ALARM by RELIANCE CONTROLS MfrPartNo THP207M 1 Multi
THP207M Features: -Use as a power failure light with the alarm function turned off. -LED light will last over 6 hours once the battery is fully charged and the light is turned on. -Alarm will sound itself for 2 hours when there is no power to the device. Product Type: -Transfer switch cover/Power cord. Dimensions: Overall Height – Top to Bottom: -3.5″. Overall Width – Side to Side: -2.5″. Overall Depth – Front to Back: -2″. Overall Product Weight: -1 lbs.
Automatic Power Cut Failure Alerter LED Indicator Smart 120db Outage Alarm Warning Siren, Needs 9V Battery (Not Included)
- LED indicator shows power out / failure alarm and power condition.
- Connect the alarm to the AC power supply and turn on the power switch to enter the working state. The siren alarms when the power supply is cut off until restore power. The warning could be manual muted by on/off switch.
- High voltage resistant design, works fine even when power voltage exceeds standard.
- Drawer-type cell cover design, can change the battery easily.
- Widely used in industrial and mining enterprises, institutions, substations, telecommunications rooms, farms, etc.
Features:
LED indicator shows power out / failure alarm and power condition. The siren alarms when the power supply is cut off until restore power. The warning could be manual muted by on/off switch. Drawer-type cell cover design, can change the battery easily. High voltage resistant design, works fine even when power voltage exceeds standard.
Specification:
Plug: CN Plug
Voltage: AC 220V
Color: Color
Battery: 1pcs x 9V Battery (NOT included)
Alarm Volume: 120db
Cable Length: Approx. 85cm/33.5inch
Size: Approx. 10*5.3*2.5cm/3.9*2.1*1inch
Weight: Approx. 100g / 3.5oz
Package List:
1 x Power Failure Alarm
Note: Please kindly make a note if you need any plug adapter.
Power Fail Alarm – Ultra Loud, with Flashlight
Power fail alarm continuously monitors 120V AC power outlets and if there is an interruption, the LED flashes and a 103dB beeping alarm sounds to let you know. At the same time a high-intensity 3W LED “flashlight” comes on to light walkways. (goes off after 30 minutes to save power) The alarm can be silenced by pushing the green button. Will alarm for 48 hours straight with the supplied Lithium battery. The flashlight can be toggled on and off with the green button. The flashlight is a high quality 3W element equal to most high end flashlights. Designed to help senior citizens read emergency instructions when there’s no other light. The only power failure device with plug detection; if your plug becomes unplugged from the power fail alarm itself, this is detected electrically and the alarm sounds. Simple installation, just pop in the (included) long-life lithium battery. After that you are protected for the next 10 years. Very loud beeping audio buzzer – 103dB at 2 ft will never be missed even in noisy factories. Extremely low power consumption allows the lithium battery to last up to 10 years. After that time, if battery power is low due to excessive alarming time, a low-battery warning alarm sounds for many weeks. Selectable modes so it can detect millisecond blips, (useful for computer equipment) or only report power outages longer than 10 seconds. A selectable “snooze alarm” feature will cause the alarm to come back every 30 minutes until power is restored. Convenient passthrough receptacle. Includes a secure screw-mounting tab for critical process monitoring equipment, freezers, heaters, pumps, fans and more.
Temp Stick Wireless Remote Temperature & Humidity Sensor. Connects directly to WiFi. Free 24/7 Monitoring, Alerts & Historical Data. Free iPhone/Android Apps, Monitor from anywhere, anytime! – White
- Remote Wifi Temperature and Humidity Monitor. 5 Year Warranty… the last sensor you’ll need to buy!
- Superior 1 Year+ battery life! Completely wireless, battery operated sensor (2x AA batteries, included). No gateways or wires needed. Connects to Wifi and Sends text and email alerts for Hi/Low Temperatures, Humidity Levels, Wifi Connection Loss and Low Battery.
- Check-in remotely anytime, from anywhere using your mobile, tablet or pc. The Temp Stick connects directly to your wifi and monitors and alerts temperature and humidity levels in your home, fridge, attic, walkin cooler.
- Data logging with Unlimited History. No subscription and No fees. Accurately monitor conditions 24/7.
- Made in the USA. Proudly support American manufacturing & ingenuity. Free customer service, easily reach us by phone or email Mon > Sat for fast, knowledgeable assistance.
Temp° Stick by Ideal Sciences is an all-in-one wireless sensor that remotely monitors and alerts temperature & humidity conditions from anywhere, anytime. Connect to your home or business wifi network and start receiving text and email alerts the instant an important change in temperature or humidity triggers, when connection is lost or when batteries are low.
View and manage from any smart phone, tablet or pc.
- Track Temperature (-40°F to 125°F)
- Track Humidity (0 – 100%)
- Receive text and email alerts
- Battery operated, place it anywhere
- Connects directly to wifi network
- No gateway devices required
- Easy 3 minute setup
- Set hi-lo triggers for alerts
- Customize alert messages
- Monitors /alerts battery levels
- Monitors /alerts if wifi signal lost
- Unlimited history of readings
- Monitor every 5,10,15,30 or 60 min
- No fees or subscriptions
- Access anywhere via web browser
- Free Android & iPhone apps
- Alert multiple users
- Supports multiple sensors
- Set C° or Fahrenheit
- LED light on when taking readings
- Requires 2 x AA alkaline batteries (included)
- Battery life: 1+ Years
- 5 Year Warranty
- American Made
- Free, Lifetime Support 888.263.6973
Set-up in 3 easy steps
1) Add batteries (included) to sensor.
2) Connect with phone, tablet or pc
3) Sign up and follow instructions to receive temperature and humidity data.
Specifications:
Dimensions: 3.5″ x 1.5″ x 1.25″
Factory-calibrated, excellent stability
High Accuracy Temperature Sensor : ±0.4 °C (max)
Temperature operating range Up to –40 to +125 °F
Relative Humidity Sensor : ± 4% RH (max), 0–80% RH
0 to 100% RH operating range.
RV Customers: Does not operate on guest networks at RV parks, you’ll need a wifi hotspot.
Power Failure Alarm, Automatic Power Cut Failure Alerter LED Indicator Smart 120db Outage Alarm Warning Siren, 220V
- ➤100% Brand new and high quality. And the siren will alarm when the power supply is cut off until restore power.
- ➤Power out/ failure alarm with led indicator. With indicator indicates the power condition
- ➤The siren alarms when the power supply is cut off until restore power and the warning could be manual muted by on/off switch.
- ➤Drawer-type cell cover design, can change the battery easily. Using method: connect the alarm with 220V power, turn on the power switch.
- ➤High voltage resistant design, works fine even when power voltage exceeds standard.
Specification:
Plug: CN Plug
Voltage: AC 220V
Color: Color
Battery: 1pcs x 9V Battery (NOT included)
Alarm Volume: 120db
Cable Length: Approx. 85cm/33.5inch
Size: Approx. 10*5.3*2.5cm/3.9*2.1*1inch
Weight: Approx. 100g / 3.5oz
Package List:
1 x Power Failure Alarm
Note: Please kindly make a note if you need any plug adapter.
Conclusion
By our suggestions above, we hope that you can found refrigerator power loss for you.Please don’t forget to share your experience by comment in this post. Thank you!
