yesallevent 
Nowadays, there are so many products of rasberry pi 3 cooling case in the market and you are wondering to choose a best one. You have searched for rasberry pi 3 cooling case in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings rasberry pi 3 cooling case which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b
- 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 / pi 2 (Not include Pi Board)
- Case has the designed layout for the Raspberry pi 3 model b+ and will perfectly protect your pi components
- Made of Acrylic, the pi case makes sure that won’t block Pi’s Wifi / Bluetooth signal
- Accurate plugs on the case are available to connect Pi’s GPIO, HDMI, USB, SD, Power Supply etc ports
- Specially Come with mini fan and 3 pcs heatsinks for quick cooling CPU/ROM/RAM, also has a stable 2.5A power supply with a handy on/off switch on the 1.5m long cable
(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .
Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.
Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case
Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)
Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.
(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.
Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A
Similar items with 4 stars and above
iUniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B (Black for 3B+/3B)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 30mm Large Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 3 Model B+ / Pi 3B
Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B
- ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board)
- ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components
- ✓ Easy to access all GPIO ports – Raspberry pi case with cutout to allow Pi’s GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access
- ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi’s Wifi / Bluetooth Signal
- ✓ 5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi’s power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply
iUniker Raspberry Pi 4 Case, Raspberry Pi 4b Case with Fan Raspberry Pi Fan Case with Raspberry Pi 4 Heatsink Raspberry Pi Heatsink for Raspberry Pi 4 Model B/Pi 3B+/ Pi 3B/ 2B
Miuzei Case for Raspberry Pi 4 with 5V DC Cooling Fan, 4 Pcs Heat Sinks for Raspberry Pi 4 Model B
- Four- layer case updated for raspberry pi 4, much simple than multiple layers case for assembly(Not include Pi 4 Board)
- The case protects the pi and all ports were easy access and inputs are still available. Transparent layer is nice to see the tech behind the machine.
- Better heat dissipation performance with large 35*35mm fan with four heat-sinks to keep your Pi cooler, especially that mid-plate trapping the air from the fan could be better circulation for heavy CPU loads.
- The rubber feet on the bottom of the case, elevate the nuts from contacting the surface and provides a stable platform that allows air to circulate on the bottom side of the board.
- Package Included: Pi 4 Case, Cooling Fan(35mm), 4 Aluminum Heat Sinks, 4 Rubber Feet, Screwdriver
Miuzei Raspberry Pi 4 Case -new design showcases the RPi and keeps it much cooler.
・No tedious stack-Much simple for assembly than multiple layers case.
・Pretty blue heat sinks and cooling fan could do help a lot for overclocking.
・Fan setup with 5volt is still absolutely silent and works well.
Package Included:
1xMiuzei case
1xCooling Fan
4x Aluminum Heatsinks：1× 25*25*5mm, 1× 15*10*6mm, 2× 7*7*6mm
1x Screwdriver
4x Rubber feet
Note:
Please remove the protective film on the top and bottom layers(on both sides)before you set it up.
MakerFocus Raspberry Pi Armor Case, Raspberry Pi Metal Case with Dual Fan Aluminium Alloy, Raspberry Pi Fan, Heatsink for Raspberry Pi 3 Model B+ / Pi 3 B+/Pi 2 B+
- Note: Raspberry Pi Board is Not Included.
- 【Very Easy to Set Up】 Compatible with the latest Raspberry Pi 3B+ Model, Raspberry Pi 3B Model, Raspberry Pi 2B Model.
- 【Good Cooling Function】 Comes with dual quiet cooling fan, built-in heatsink and thermal tape, which makes your Pi cooler than others.
- 【High Quality Material】 Updated manufacturing process with improved CNC aluminium alloy quality. Not easy to rust.
- 【Support】We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately after received your email. Your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
Raspberry Pi 2B/3B/3B+ Armor Case, Raspberry Pi Metal Case With Dual Cooling Fan Aluminium Alloy, Built-in Heatsink, Radiation And Rust Protection for RPI 2B/3B/3B+
Description:
1. Used for Raspberry Pi 2B/3B/3B+ Module.
2. The armor shell is made of aluminum alloy with CNC machining manufacturing technology. Its cool and attractive design are appreciated by the manufacturers.
3. Including dual fan and thermal tapes that reduce the temperature for the Raspberry Pi plate.
4. There are four screws to fix the case with Raspberry Pi board.
For dual fan and heatsink:
Design of low energy consumption.
Dual cooling experience, no more overheating problems.
Very quiet cooling fan, you won’t be bother by the noise.
All the fans were tested by our engineer, very nice quality control.
The thermal update tape can guarantee the best thermal driving effect.
For aluminum alloy housing:
87*56*25mm. Perfect size for Raspberry Pi 2B/3B/3B+ Model.
The high quality CNC aluminum alloy housing can protect your Pi safe. Radiation protection and difficult to rust.
Open design can make sure that our CNC casing does not affect the Wifi signal.
Package Including:
1 * Aluminum alloy cooling case with dual fan
4 * Thermal tape
12 * Screws(8 for fans, 4 for case)
1 * Wrench
iUniker Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case with Cooling Fan, Raspberry Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B (Black with Large Fan)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 40mm Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi 4 Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 4 Model B
Conclusion
By our suggestions above, we hope that you can found rasberry pi 3 cooling case for you.Please don’t forget to share your experience by comment in this post. Thank you!
