yesallevent 
Nowadays, there are so many products of rain gutter heating cables in the market and you are wondering to choose a best one. You have searched for rain gutter heating cables in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings rain gutter heating cables which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Frost King RC60 60 Feet, 120V, 5 Watts Per Foot, Electric Roof Cable
Frost King roof and gutter cables. Prevents ice build up in gutters and ice dams getting under the shingles. Kit comes complete with cable spacers and shingle clips. Complete installation instructions. Available in lengths from 30′ – 200′.
Prime Wire & Cable RHC600W120 ROOF & GUTTER DE-ICING KIT ROOF HEATING CABLE
- 120 ft. Black roof & gutter de-icing kit, 600 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
Prime Wire & Cable RHC150W30 Roof & Gutter De-Icing Kit Roof Heating Cable
- 30 ft. Black roof & gutter de-icing kit, 150 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
- Total Outlet: 1
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
Prime Wire & Cable RHC1000W200 ROOF & GUTTER DE-ICING KIT ROOF HEATING CABLE
- 200 ft. Black roof & gutter de-icing kit, 1000 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
HEATIT JHSF1 Self Regulating ROOF & Gutter DE-Icing Pre-Assembled Heating Cable 50-feet 120V
- HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com). Suitable for use on plastic and metal water pipes( including inlet pipe,drain pipe, sewer, palm tree frost protection etc). Industrial grade self regulating heating cable. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Protect pipes up to 2 1/2” in diameter. For a better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), please use 1” thick insulation material.
- ETL approved. 50 degrees F for pipe freeze protection.3 ft 18/3 cold lead with grounded plug.
- Roof deicing application: Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs and so on. Rated 10W/ft at 32°F (0°C) for roof deicing. For roof deicing application, you may need to buy clips and hangers separately.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes. Two year limited warranty – If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue.
Similar items with 4 stars and above
Prime Wire & Cable RHC800W160 Roof Heating Cable
- 160 ft. Black roof & gutter de-icing kit, 800 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
Heat it HIRD 20 feet Roof Gutter De-Icing Cable
- Designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground.
- Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available
- Suitable for most roof and gutter configurations. HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
- Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable.
- Both CSA and ETL approved. 6 ft 18/3 cold lead with plug
- 5 watts/ft. Pre-assembled, ready to install, no maintenance required
- Easy instruction manual, clips and spacers are included.
- Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time.
What is the purpose of the heating cable?
The roof de-icing cable is designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. When properly installed and operated, this product creates a path for melted snow of ice (“melt water”) to drain from the roof to the ground.
Why you need to choose HIRD roof heating cable to protect your roof in the winter ?
HIRD roof heating cable was approved by both CSA and ETL. You can have more confidence on the product safety. Pre-assemble heating cable make installation easy for do-it-yourselfers with the included clips and spacers.
HIRD owned the aluminum foil and the tinned copper braid to make sure the 100% screen rate to make the product more healthy and more stable.
In the connection, HIRD take the industrial grade heat shrinkage tube technology to make the cable more durable.
How about the manufacturer?
The factory meet ISO9001 standard (audit by BV)in the production process and the company take a very strict requirement on the incoming material, production process control, finish good inspection etc. Advanced product structure engineering design, good raw material, strict production process, strict internal management plus many years maneuvering experience make HIRD more reliable.
This kit is only designed for use on:
Metal or plastic gutters/downspouts
Inclined roofs
Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes
Do not use this kit on any other type of roof, gutter and downspout, including: Roofs with wooden shingles, Rubber or rubber membrane roofs, Composite (tar and gravel) roofs, Wooden gutters or downspouts, Flat roofs
HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
These types of roofs require special installation or the use of a self-regulating cable.
HEATIT HIRD 60 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable
- Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time.
- Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included.
- Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts.
- Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available
- Suitable for most roof and gutter configurations.
- Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable.
Similar items with 4 stars and above
Easy Heat ADKS-800 160′ Roof/Gutter Kit
- Eliminate damage caused by ice dams.
- The ADKS kit includes a de-icing cable with a 6 foot long cold section and plug, roof clips, and cable spacers.
- Complete with Clips and Spacers
- Approved For Metal and Plastic Gutters
- Prevents Water and Ice Damage by Providing a Clear Path for Melting Water
EasyHeat ADKS Series Kit of Roof and Gutter De-Icing Heat Trace Cable – 160 Feet Long – 800 Watt – Residential Grade – 120 Volt – 5 Watts per Foot with 6 Foot Power Cord and Plug and Roof Clips and Cable Spacers (Includes 5 CSK-12)
Conclusion
By our suggestions above, we hope that you can found rain gutter heating cables for you.Please don’t forget to share your experience by comment in this post. Thank you!
