yesallevent 
Nowadays, there are so many products of pex heating manifold and zone actuator in the market and you are wondering to choose a best one. You have searched for pex heating manifold and zone actuator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pex heating manifold and zone actuator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
5 Loop Radiant Heat Manifold, 5-zone PEX Tubing Manifolds with Compatible Outlets, for Hydronic Radiant Floor Heating (1/2" 3/4" PEX adapters sold separately)
- Nickel plated brass
- Imported
- Its nickeled brass material are higher thermal conductivity, faster heating and insertion into plastic pipes than stainless steel ones.
- 5 loops with 1 extra drain and cap, 1” FPT supply and return, up to 1.6 GPM high flow meter.
- Compatible to both 1/2″ and 3/4″ pipes outlets. Adapters not included please search AB manifold adapters 1/2 and 3/4.
- Heavy duty stainless steel mounting bracket
- It includes automatic air vent, shut-off valve, drain valves with outlet caps, temperature gauge, flow valve, balancing valve/manual wheel for supply and return trunks.
AB Radiant PEX 1/2" Manifold Connector/Adaptor/Tubing Nuts (Pack of 10)
The 1/2 Inch PEX Manifold Adaptor is an additional component that enhances features of your radiant/PEXManifold product. The 1/2 Inch PEX Manifold Adaptor is used for PEX Manifold such as 2 Loops, 3 Loops, 4 Loops, 5 Loops, 6 Loops, 7 Loops, 8 Loops and 10 Loops.
4-wire Thermal Actuator for Radiant Floor Heating Manifold
These actuators are only guaranteed to work with and warrantied for stainless steel or brass PEX radiant heating manifolds. Applications: Manifold actuator is essentially a zone valve, designed to replace a manual balancing valve on the manifold. In conjunction with a 24V zone valve control and any 24V thermostat(s), manifold actuators allow to separate the manifold into “zones” (rooms) and to control the temperature in the room with radiant floors through the thermostat. Installation: Installation is easy: Simply unscrew the plastic manual balancing from the manifold, screw on the O-ring which comes with the actuator and snap on the actuator. Wiring is done as per zone controller manufacturer’s manual
SharkBite 535519 22785 Copper PEX Manifold, 1-Inch x 3/4-Inch
- INSTALLS IN SECONDS: PEX water manifold requires no soldering or glue
- Just push to create a watertight seal
- LINER: No loose components with SharkBites’ tube liner, nothing to lose and easy to create a dependable secure connection
- COPPER, PEX, CPVC: SharkBite straight coupling plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination
- EXPANDABLE and FLEXIBLE: Simple – Connect multiple manifolds together using SharkBite PEX Fittings
- LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant
Product Description
CUT. PUSH. DONE. Multi-port tee with 3/4 inch inlets and 1/2 inch outlets to supply multiple water lines. Reduces the risk of leaks by eliminating excess connection points. The SharkBite Connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. When you insert a pipe into a SharkBite quick-connect fitting, the fitting’s stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal. No soldering, no clamps, no glue. SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces. Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results.
From the Manufacturer
SharkBite 22785 Copper Manifold w/ Barb Branches 4 Port Closed 1-Inch Trunk, w/ 3/4-Inch Barb Inlets and Outlets and 1/2-Inch Barbed Ports (2-Inch on center)
Happybuy Oxygen O2 Barrier PEX Tubing – 1/2 Inch x 1000 Feet PEX Tube Coil – EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Pex Pipe (1/2" O2-Barrier, 1000Ft/Red)
- TECHNICAL DATA: PEX-B EVOH Oxygen-Barrier PEX Tube
- Color: Red
- PEX Tubing Size: 1/2″
- Coiled: Yes
- Total Length: 1000ft (304m)
- OD: 0.625″(15.9mm)
- ID: 0.475″(12.1mm)
- Pressure Ratings: 80psi@200F, 100psi@180F, 160psi@73F
- Minimum Bending Radius: 5″ (Industry Standard for 1/2″ PEX)
- SUPERIORITY: EVOH PEX Barrier pipe keeps oxygen and other elements from infiltrating and corrupting the key mechanical components in heating systems, with the same properties as PEX non barrier pipes
- WIDE APPLICATIONS: Suitable for light commercial and residential use
- Ideal for Baseboard & radiator heating systems
- Snow & ice melting systems
- Water supply and radiant floor heating systems
- RESISTANT TO TEMPERATURE AGING:PEX tube is resistant to temperature aging and will provide you with longer life expectancy and maintenance free for exceptional performance
- DURABLE FREEZE PROTECTION: The tubing composite also provides additional benefits of durable freeze protection by expanding and contracting to function as snow melting application
Siemens SSA81U Zone Valve Electronic Actuator with 3 Position Control Signal and Non Spring Return
- These products are very energy efficient
- Siemens reliability and performance in a small Package size – the perfect solution to your flow control needs
- The product is manufactured in china
- Non-spring return (fail-in-place)
- 3-position control
- 24 Vac supply voltage
- UL listed for plenum installations
The Siemens Electric Zone Valve Actuator works with Siemens 599 Series Zone Valves. It is a normally closed, 3-position, non-spring return (fail-in-place) actuator and features 24 Vac operating voltage, with 1/10-inch (2.5 mm) stroke and manual override. This actuator is UL listed for plenum installations. Typical applications include hot or chilled water for zones with radiators; floor heating via manifolds; fan coil units; cooling ceilings; wall-mounted boilers and VAV applications.
Viega 15061 ProRadiant 24 V Power Head for Stainless Manifold
- Minimizes circulation of dust and allergens
- proven press technology ensures secure connections
- 30 year warranty on Viega tubing
- 24 VAC
- fits return valve on Viega’s stainless manifolds
- 2-Position actuator provides circuit zone control
- Connects to zone control or thermostat
- 4-wire has integral end switch
Product Description
Viega ProRadiant systems offer versatility and can be installed in new construction and existing homes, over wood or concrete, interior or exterior. Beside various floor heating systems, Viega offers a full line of controls, manifolds and mixing stations engineered to function with all ProRadiant products. Faster and easier than traditional radiant installation and typically reduces energy costs from 10 to 30 percent.
From the Manufacturer
Viega ProRadiant systems offer versatility and can be installed in new construction and existing homes, over wood or concrete, interior or exterior. Beside various floor heating systems, Viega offers a full line of controls, manifolds and mixing stations engineered to function with all ProRadiant products. Faster and easier than traditional radiant installation and typically reduces energy costs from 10 to 30 percent.
Viega 15064 ProRadiant 24 V 4-Wire Power head for Stainless Manifold
- Minimizes circulation of dust and allergens
- proven press technology ensures secure connections
- 30 year warranty on Viega tubing
- 24 VAC
- fits return valve on Viega’s stainless manifolds
- 2-Position actuator provides circuit zone control
- Connects to zone control or thermostat
- 4-wire has integral end switch
Product Description
Viega ProRadiant systems offer versatility and can be installed in new construction and existing homes, over wood or concrete, interior or exterior. Beside various floor heating systems, Viega offers a full line of controls, manifolds and mixing stations engineered to function with all ProRadiant products. Faster and easier than traditional radiant installation and typically reduces energy costs from 10 to 30 percent.
From the Manufacturer
Viega ProRadiant systems offer versatility and can be installed in new construction and existing homes, over wood or concrete, interior or exterior. Beside various floor heating systems, Viega offers a full line of controls, manifolds and mixing stations engineered to function with all ProRadiant products. Faster and easier than traditional radiant installation and typically reduces energy costs from 10 to 30 percent.
Similar items with 4 stars and above
4 Wire Thermal Actuator for Radiant Floor Heating
This actuator is designed to replace manual balancing valve on manifold to provide electronic control of an individual zone (branch). Several actuators can be installed to achieve full control of the manifold.
Similar items with 4 stars and above
2 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE STAINLESS STEEL RADIANT HEATING w/ 2WIRE ACTUATOR
2 LOOP/BRANCH 1/2″ PEX MANIFOLD WITH BALL VALVE STAINLESS STEEL RADIANT HEATING w/ 2WIRE ACTUATOR
Conclusion
By our suggestions above, we hope that you can found pex heating manifold and zone actuator for you.Please don’t forget to share your experience by comment in this post. Thank you!
