Which Is The Best Microwave Oven Tester

Brief Description

This is the most reliable microwave leakage detector. It can be used to verify any leakage from microwave ovens within a few minutes.

It is featured with large LCD and leakage volume in dangerous zones will sound “beeping” and a red flashing lamp. When there is excessive microwave leakage from the microwave ovens, the unit will be automatically alarmed and flash to effectively test the microwave leak. In addition, this microwave leak detector calibrated in the factory and never need recalibration.

Features

-Large LCD digital readout

-Leakage volume in dangerous level will sound “beeping” and red flashing lamp

-Portable design for use in either hand

-Never needs recalibration

-High sensitive

-Excellent reliability and high precision

-Maximum data hold function

Specifications

-Measure range: 0 ~ 9.99mW/cm2

-Warning: 5.0mW/cm2

-Accuracy: ±1db

-Calibration: 2450MHz

-Power supply: 9V battery

-Item Size: approx. 145 (L) x 58 (W) x 35 (D) mm (5.71′ x 2.28′ x 1.38′ inch)

-Item Weight: approx. 120 g (4.23 oz)

One Set Included

-1 x Professional Microwave Leakage Detector

-1 x Instruction Manual

-Standard Factory Package (no box)

microwave tester

This is the most reliable microwave leakage detector.
It can be used to verify any leakage from microwave ovens within a few minutes.
It is featured with large LCD and leakage volume in dangerous zones will sound “beeping” and a red flashing lamp.
When there is excessive microwave leakage from the microwave ovens, the unit will be automatically alarmed and flash to effectively test the microwave leak.
In addition, this microwave leak detector calibrated in the factory and never need recalibration.

Features:
– Large LCD digital readout
– Leakage volume in dangerous level will sound “beeping” and red flashing lamp
– Portable design for use in either hand
– Never needs recalibration
– High sensitive
– Excellent reliability and high precision
– Maximum data hold function Specifications
– Measure range: 0 ~ 9.99mW/cm2
– Warning: 5.0mW/cm2
– Accuracy: ¡À1db
– Calibration: 2450MHz
– Power supply: 9V battery
– Item Size: approx. 145 (L) x 58 (W) x 35 (D) mm (5.71′ x 2.28′ x 1.38′ inch)
– Item Weight: approx. 120 g (4.23 oz)

Package Content:
– 1 x Professional Microwave Leakage Detector [9V Battery Included]
– 1 x Instruction Manual
– Standard Factory Package.

Home Inspector Inspection Microwave Tester Tool Brand: MICROBAR NEW & IMPROVED! – NO BATTERIES REQUIRED – LARGER ORANGE BRIGHT LIGHTS – FOR HOME INSPECTORS – FOR APPLIANCE TECHS – FOR HOMEOWNERS AND DYI – INSTRUCTIONS INCLUDED SIMPLY PUT IN MICROWAVE AND TEST TEST MICROWAVE POWER AND DEFROST SETTINGS

The PMD74 is a microwave leakage detector from Pyle. This device never needs calibration and allows you to accurately and precisely measure the amount of radiation emitting from your microwave. Measures from 0 to 9.99 mw/cm2. The PMD74 will automatically signal a warning beep and LED flash if the detected radiation is above safe levels (5 mw/Cm2). Make sure your microwave is functioning properly and get piece of mind with the PMD74.

Features:

– Ranges: 2.45 GHZ (microwave frequency) or 50MHZ~3.5 GHZ.
– RF power density: 0.01~2.700m W/cm2.
– Data hold (HOLD).
– Maximum (MAX) Hold.
– Minimum (MIN) Hold.
– Zero function.
– Build in alarm setting.
– Low battery indication.
– Overload indication.

Application:

– This meter is applied to measuring electromagnetic fields of 2.45 GHZ (microwave frequency) or normal (50MHZ~3.5 GHZ).
– It is capable of measuring the electromagnetic field radiation intensity that is produced from welding equipment, microwave oven and otherenvironment…etc
– Microwave oven leakage detection.

Specification:

– Display : 3-3/4 digits LCD, maximum reading 3999.
– Resolution : 0.001mW/cm2.
– Frequency response : 50MHz to 3.5 GHz.
– Sensor : Single Axis.
– Accuracy : ±2 dB at 2.45 GHz ± 50MHz.
– Over load : LCD display “OL”.
– Sample rate : 2.5 times per second.
– Battery : 9V NEDA 1604, IEC 6F22 or JIS 006P.
– Battery life : Approximate 100 hours.
– Operating temperature & humidity : 5℃to 40℃,below 80% RH.
– Storage temperature & humidity : -10℃to 60℃, below 70%.
– Weight : About 170g.
– Dimensions : 130(L)*56(W)*38(H) mm.
– Accessories : User’s manual, 9V battery, carrying case.

Conclusion

By our suggestions above, we hope that you can found microwave oven tester for you.Please don’t forget to share your experience by comment in this post. Thank you!