yesallevent 
Nowadays, there are so many products of liquid cooling gpu bridge in the market and you are wondering to choose a best one. You have searched for liquid cooling gpu bridge in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings liquid cooling gpu bridge which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific C240 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W242-CU12SW-A
- Analog/digital lighting – Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All included – the C240 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator – the C240 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- C-pro fittings – build like a Pro with a new take on compression fittings. Engineered with four Built in O-rings to provide maximum leak prevention and a secured compression seal
- Exclusive components – W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15-ddc pump/reservoir combo
- 2 years
Dimension: 520 (L) x 200 (W) x 232 (H)
Compatibility:
Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
(CPU Socket)
Components Dimension:
Pump & Reservoir: 86.54 (L) x 62 (W) x 140.1 (H) mm
Copper Radiator: 29.5 (H) x 119 (W) x 279 (L) mm
Tube Dimension:
OD : 16mm, ID : 12mm
Fan Spec:
PWM 500~1500 RPM ,
( ARGB Controller or 5V MB ARGB Sync )
Coolant: T1000 Coolant Pure Clear
Kit Contents:
CPU Water Block
– Pacific W4 ARGB CPU Water Block x1
Pump/Reservoir
– Pacific PR15-DDC Pump/Reservoir Combo x1
Copper Radiator
– Pacific C240 Radiator 29.5 (H) x 119 (W) x 279 (L) mm x1
ARGB Fan
– Pure 12 ARGB Sync Radiator Fan TT Premium Edition x2
– ARGB LED Controller
Fittings
– Pacific C-Pro G14 PETG 16mm OD Compression – Black x6
– Pacific G1/4 90 Degree Adapter – Black x2
Coolant
– Thermaltake T1000 Coolant Pure Clear x1
Tube
– V-Tubler PETG Tube 16mm OD 500mm x 8
Accessory
– Intel and AMD Universal Backplated & Mounting Kit
– 24pin ATX Bridge Tool x1
– Thermaltake Thermal Grease x1
– Silicone insert x1
Similar items with 4 stars and above
ASUS ROG GeForce RTX Nvlink Bridge with Aura Sync RGB 3 Slot Graphic Cards ROG-NVLINK-3
- ASUS Aura Sync RGB lighting features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of AURA Sync enabled products
- Silky smooth 4K/5K/Surround gameplay with double the available Transfer bandwidth compared to previous generation GPUs
- Maximize your flexibility With support for 3 slot 2-Way configurations
- Touch-sensitive panel displays millions of color with up to 12 different lighting effects
- Pairs perfectly with all ASUS GeForce RTX 2080 Ti, and 2080 graphics cards
The ASUS ROG nvlink 3 slot bridge doubles the available Transfer bandwidth to enable smoother gaming performance on a mainstream platform with ASUS Aura Sync. Outshine the competition with Aura Sync RGB with a touch-sensitive panel. The ROG SLI HB bridge pairs perfectly with ASUS GeForce RTX 2080 Ti and 2080.
anidees Graphic Card Cooler 3 x80mm PWM Fan, Support ASUS Aura SYNC/MSI Mystic Sync/ASROCK Aura RGB/GIGABYTE RGB Fusion (5V 3 Pin Addressable headers ONLY) PCI Mount Bracket with Remote- AI-GP-CL
- Parallel or Vertical Cooling down Graphic card directly with three high air flow RGB Fans
- Sturdy Metal with aluminum brush with PCI mount design for easy installation
- 80mm Dual Ring RGB Fans x3 pcs: 12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.
- Easy to use: the fan allows you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by 5V 3pin ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0 (Please note: It does not support 12V 4 pin RGB header from motherboard).
- PWM fan speed control: allows for dynamic speed adjustment, minimizing noise or maximizing airflow.
- RF wireless control: allow you to adjust Fan Speed and cycle through lighting effects / brightness / LED speed without opening the case.
Specifications:
Part No : AI-GP-CL
LED Color : RGB
Dimension:11.22 x 3.7 x 1.02 inches
Fan Dimension : 80 x 80 x 20 mm
Weigh : 1 lb
Max Air Flow : 11.14 CFM
Max Air Pressure: 0.49 mm-H2O
Fan Speed: 1600 rpm ± 10% RPM
Noisy Leve : 19.3 dBA
Bearing : Rifle Bearing
Connector : 5 PIN
Voltage :12 V
Start Voltage : 8.5V
Power consumption : 3.12W
Buy with confidence: 12 Months Warranty, 24 hours friendly customer service available at all time.
Corsair H100i RGB PLATINUM AIO Liquid CPU Cooler,240mm,Dual ML120 PRO RGB PWM Fans,Intel 115x/2066,AMD AM4/TR4
- Two 120 millimeter ML PRO Series RGB magnetic levitation PWM fans deliver a blast of color and improved airflow for extreme CPU cooling performance
- 16 Individually controlled RGB LEDs light up the pump head to produce stunning, customizable lighting effects to match your build
- CORSAIR iCUE software allows you to control your cooler’s RGB lighting, monitor CPU and coolant temperatures, and adjust fan and pump speeds, all from a single intuitive interface
- Thermally optimized cold plate and low noise pump design for high performance, quiet cooling
- Cooling Socket Support Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4, AMD TR4
Bitspower GPU Waterblock Bridge for 2 Cards Between Slot 1 and 4, Clear
Bitspower’s new design block bridge for 2 cards (between slot 1 and 4), is designed to be a solution to reduce the amount of fittings necessary to hydraulically connect two blocks for an SLI/Crossfire setup, and it provides an additional level of safety by reducing the number of joints.
Model: BP-VGAB14AC-CL
Bewinner Mini South Bridge Cooling Water Block,CPU Liquid Cooler Kit Red Copper Base Suitable for 4.4-5.8cm Pitch of Diagonal Mainboard,Precise Hole Position,Easy to Install
- A great cooling kit for heat reducing, keep your computer south bridge running well.
- Suitable for 4.4 – 5.8cm pitch of diagonal mainboard.
- High purity red copper at the bottom, effectively prevent from oxidation.
- Made of high-quality pure copper and aluminum, resists from high temperature and never distort.
- Precise hole position, easy to install.
Features:
A great cooling kit for heat reducing, keep your computer south bridge running well. Suitable for 4.4 – 5.8cm pitch of diagonal mainboard. High purity red copper at the bottom, effectively prevent from oxidation. Made of high-quality pure copper and aluminum, resists from high temperature and never distort. Precise hole position, easy to install.
Specifications:
Color: Black
Material: acrylic + Red Copper
Compatibility: For 4.4 – 5.8cm Pitch of Diagonal Mainboard
Screw Thread: G1/4
Copper Base Thickness: Approx. 3mm
Whole Thickness: Approx. 10mm
Backboard Size: Approx.43 * 31mm
Interface Diameter: Approx. 12.9mm
Package Weight: 42g
Package List:
1 * South Bridge Water Cooling Block (NOT includes connectors.)
2 * Screws with Spring
Bykski Graphics Card GPU Waterway Connection Adjustment Bridges Water Block (L8 2 Way RBW LED Bridges Water Block)
Color:Transparent
Process:Machine processing
Pattern:Smooth
Screw thread:G1/4″
Size:Refer to dimension drawing
Installation Screws
Seal O-rings
No plugs and other compression fittings
Jammas 15pcs /lot 20x20mm Laptop GPU South Bridge IC Heatsink Cooling Silicone Thermal Conductive Pad – (Weight: 20x20x2.0mm)
15 pcs/lot! Laptop GPU South Bridge IC Heatsink Cooling Silicone Thermal Conductive Pad 20x20mmx( 0.5mm – 1.0mm – 2.0mm )
Packing list
thermal silicone pad …. 15pcs
100% Brand New
Type : 2cm*2cm
Thickness: 0.5mm, 1.0mm, 2.0mm
Continuous Temp: -40C-260C
Thermal Conductivity: 3.2w/m-K
Breakdown Voltage: 4kv/mm
Notice: You can cut the pad into different size according to your needs !
This handy thermal pad offers a mess-free installation , maximum heat conduction and increased cooling.You are biding on a piece of heat sink for graphic cards , graphic chips , North-south bridge chip , memory chipset , IC.
Item specifics:
Particle size: 1-10μm
Model number: thermal silicone Pad
Usage: cooling chip
Is customized: Yes
LINKUP Flexible SLI Bridge GPU Cable Extreme High-Speed Twin-axial Technology Premium Shielding 100ohm Design for nVidia GPUs Graphic Cards – [4 cm]
- Over 16GB/s via rare shielded Twin-axial wires and dedicated power lines for lossless signals at range.
- Flexible sectional design allows for aggressive orientations and better airflow.
- Quality hand soldered gold-plated contacts for signal integrity.
- Individual laneway shielding prevents external EMI/EFI and interference between channels.
- Compatible with nVidia Graphic Cards (must be identical cards, same model, same VRAM). Available in lengths from 4cm, 6cm, 8cm, 10cm, 20cm, 30cm, 40cm 50cm, & 60cm (Every 2 slots need 4cm)
Conclusion
By our suggestions above, we hope that you can found liquid cooling gpu bridge for you.Please don’t forget to share your experience by comment in this post. Thank you!
