Which Is The Best Hot Water Housing

WATTS-HD4500HT34

Performance Data: 
1.Model:DN20-6F
2.Rated Power(W): 93/67/46
3.Inlet/Outlet: Flange (20mm)
4.Max Flow: 15/10/6(gpm); 55/38/22(I/m)
5.Max Head: 20/17/10(ft); 6/5/3(M)
6.Voltage/Frequency:110V/60HZ 
7.Materials:Pump housing: stainless steel
Impeller: Corrosion-resistant, Composite, PES
Shaft: Ceramic
Bearing: Carbon axial
8.Motor Feature:Single phase,Closed, externally ventilated
Heavy Duty Motor housing (Won’t get overheat even continuous running)
Insulation class: F
Protection class: IP44

Application: 
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.

Advantages:
1).High temperature resistance, anti-fraying,high efficiency, high flow,leak-tightness, low consumption 
2).Super silent, environmental protection, aesthetics, ease of installation.
3).No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
4).Built-in high sensitive electronic sensors with three-speed control.

Specification
1).Suitable for Medium: hot water and ethanol maximum ratio of 1:1 
2).Performance: Liquid temperature range:0 – 110 Celsius,Maximum working pressure:10bar
3).Ambient Temperature: Not higher than 40 Celsius.
4).Mounting Position: Shaft horizontal mounting.
5).Pump Settings: single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 170 mm.
  6).Material: cast iron, PP, ceramics.
7). Mounting position: Shaft horizontal mounting.
8). Pump settings: single-phase pipeline pump 3-speed controlled single-phase motor is not overloaded casting pump length 170 mm

The KleenWater Premier KWHW2510 is a heavy duty hot water filter for various high temperature filtration needs. The filter accepts any universal 2.5 x 10 inch cartridge. Cartridges are not included. See our other KleenWater Premier packages for combination filter/cartridge value packages.

This system includes:

(1) High temperature hot water filter by KleenWater
(1) Mounting bracket with 4 screws
(1) Filter wrench

The KWHW2510 filter is made in Italy with glass reinforced polyamide. It is rated for maximum temperature of 176 degrees F and 116 psi. The inlet / outlet is 3/4″ FPT.

The filter is equipped with a pressure relief valve which facilitates a quick and easy cartridge change. Filter dimensions are approximately 5 1/2 inch(W) X 12″(H).

Use the Amazon search bar to order KleenWater compatible cartridges:

KW2510SWHT-without-siliphosQty3 – high temp dirt sediment cartridges
KW2510SWHT(3) – high temp sediment cartridges with polyphosphate – prevents hardness scale formation
RG2K3W7 – replacement o-ring

KleenWater is a trademarked brand name owned by Pavel Water Filtration.

This convenient 7 piece high temperature filtration system by KleenWater includes:
Quantity (1) high temperature housing with 3/4″ female NPT inlet / outlet (Made in Italy)
Quantity (3) polypropelene 5 micron high temperature cartridges with scale inhibitor (Made in America)
Quantity (1) mounting bracket with hardware
Quantity (1) spanner wrench to make cartridge change quick and easy
Quantity (1) KleenWater brand spare o-ring (part# RG2K3W7) to prevent an urgent situation

The KleenWater brand KWHW2510 is made in Italy of reinforced polyamide. It is rated for maximum temperature or 176 degrees F. The inlet / outlet is 3/4″ FPT. A pressure relief valve allows easy cartridge change. The kit is provides tremendous convenience and facilitates a quick and easy installation. The water filter dimensions are approximately 5″(W) X 12″(L) and accept industry standard 2.5″(W) X 9.75″(L) cartridges. Our KW2510SWHT cartridge is made in the USA of 100% FDA compliant polypropylene. The graded density design provides 3 layers of filtration. Larger particles are trapped at the surface and progressively the cartridge allows for finer particle entrapment. Ultimately capable of 5 micron filtration near the cartridge core. To provide perspective to the 5 micron sediment entrapment rating, it is important to note the naked human eye can see down to 20 micron and a human hair is 100 microns in diameter. The grooved surface substantially increases the filter cartridge surface area thus it lasts significantly longer. The 7 gallon per minute flow rates allow for residential and light commercial applications. It is recommended the cartridge be changed every 3-6 months or upon substantial pressure reduction.

Please enter model # KW2510SWHT(3) in the Amazon search bar to re-order high temperature sediment cartridges.

3 seconds Instantaneous Water Heater
Specifications:
Material: Stainless Steel Shell
Color: Black, Golden,Red(optional)
Power: 3800W
Current: 16A/32A
Voltage: 220V/110V
​Rated Frequency: 50Hz/60Hz
Rated Pressure: 0.4-0.6Mpa
Waterproof Grade: IPX4
Temperature: 30-55℃
Plug: US Plug/EU Plug
Size: 20 x 10.5cm / 7.87” x 4.13”
Package Weight: 1300g / 2.8lb
Delivery time: 7-15 working days in most areas and 7-21 working days in remote areas

Package Included:
1 x Water Heater
2 x Fixing Screws
2 x Screws Protector

Note:
1. Please note this item should get the water first and then link the electricity when installing.
2. You’d better install this item vertically to ensure long service time.
3. 220V circuit breakers must be at least 20 amps
4. 110V circuit breakers must be at least 32 amps
5. Wire requirements above 2.5mm²

Product Description

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by ceramic shaft and radial bearings, carbon axial bearing, stainless steel rotor can and bearing plate, corrosion-resistant impeller, composite, PES, and cast iron pump housing. The motor is a 1-phase motor. No additional motor protection is required.

From the Manufacturer

Grundfos UPS15-58FC circulator pump (Grundfos# 59896341) incorporates a cast iron housing, three speed motor (Low/Med/High) and a built-in, removable check valve. Grundfos UPS15-58FC is among the most popular and most versatile circulator pump models on the market. Pump’s performance parameters cover nearly all traditional heating applications – from radiant and baseboards, to fan coils and zoning and many others. 3 speeds allow to set up the circulator pump in a way, that matches the system’s requirements, while wet rotor design allows it to be virtually silent while operating.

Product Details
Model: RS15-6
Rated Power: 93/67/46W 
Outlet: 3/4 inch 
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz

Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on

Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control

Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm

Conclusion

By our suggestions above, we hope that you can found hot water housing for you.Please don’t forget to share your experience by comment in this post. Thank you!