yesallevent 
Nowadays, there are so many products of heating gun for crafts in the market and you are wondering to choose a best one. You have searched for heating gun for crafts in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating gun for crafts which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
110V 300W Mini Portable Heat Gun for Heat Shrink Tubings and Drying Paint Hand-Hold Hot Air Gun
- 【MATERIAL】The mini heat gun is made of high-quality ABS plastic exterior and stainless steel inside, portable, simple and durable.
- 【DIMENSION】 Product dimension: 9-in x 1.7-in. The wire length of the heat shrink gun is 39-in. Built in a heat sink makes the internal temperature of the hot air gun is reduced and life is prolonged.
- 【FUNCTION】The portable hot air gun heats up in seconds and quickly gets hot temperature up to 200°C/390°F. Please DO NOT make it work more than 8 minutes in one time, also please DO NOT get too close to the material.
- 【APPLICATION】NEX heat shrink gun Comes with an additional replaceable protecting cap, it’s great for rubber stamp, embossed powder, heat shrinkable film, heat shrink tubings and drying paint, etc.
- 【ATTENTION PLEASE】All of the NEX Mini Hot air Gun are sold only by “toppowersellerus”, in order to offer all the customer’s a pleasant shopping experience, we will take responsibility to all our customer purchased from us. If you received the item without the NEX logo on the box, you will have an opportunity to get a DOUBLE REFUND. Please DO NOT trust any counterfeit seller. Thanks for your support!
About Us
NEX is our legal trademark in US.
We always focus on looking for items of elaborately designed and affordable price for customer. If there is any problem with your purchase, please contact our customer service directly. We will reply you in 12 hours and give you a reasonable solution.
Specifications:
Color: White(body) + Blue(protecting cap)
Material: ABS
Size: 9*1.7-in, wire length: 39-in
Type: Constant temperature
Working temperature: 200℃
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power: 50-60Hz
Working Time: 8 minutes
Usage:
1. Plug in the heat tool.
2. Hold the gun but do not touch the hot nozzle.
3. Keep a distance of 3-5cm from the vent,heating at an angle of about 45 degrees until the completion of the work.
4. Turn off the power to stay cooling.
Notes:
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200℃ theoretically. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
3. 100% satisfaction guarantee, 100% worry-free guarantee, 1-year manufacture guarantee! 30-day return & money back guarantee, we offer premium quality and the best service, no matter what reason cause dissatisfaction, we’ll replace it or reimburse you every cent back!
Packing Include:
1 x Heat Gun
1 x Instruction
2 x Protecting Cap
6.56FT Long Heat Gun, Homidic Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp
- ★ Material&Size: 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
- ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
- ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
- ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
- ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don’t use it more than 10 minutes in one time, just turn off then turn on for working continuously
Features:
√ 100% Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical
√ Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness
√ There are heat vents in left and right sides to decreased the internal temp and extend its lifetime
√ This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun
√ The temprature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you can turn off then turn on again for working continuously
Specification:
Material: Plastic ABS+PC
Cable length: 6.56FT /180 cm
Working temp.: About 200 ℃
Rated Power: 300W
Rated voltage:110v
Power: 50-60Hz
Working time: 8 minutes
Power type: AC power supply
Type: Constant temperature
Attention:
-Do not touch with water! Do not touch the hot nozzle.
-Do not use outdoor. Keep it out reach of children. Keep 5-6cm distance between the heat tool and itrm.
-Do not use more than 10 minutes continuously to prevent overheated.
-This hot air gun is specially made for DIY, it can’t not use in industry aspect
Package includes:
1 x Hot Air Gun
Chandler Tool Embossing Heat Gun – 300 Watt – Dual-Temperature Professional Heat Tool – for Embossing Shrink Wrapping Paint Drying Crafts Electronics DIY … (Pink)
- VARIABLE SPEED / HEAT SETTINGS: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package. It’s like having a mini-heat gun AND a full-size heavy-duty heat gun all in one!
- VERSATILE: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!
- INSULATED – ERGONOMIC – LIGHT WEIGHT – QUIET: cheap mini heat guns get too hot to hold. Traditional large “gun-style” heat guns get too heavy and awkward to handle for extended periods. Chandler Tool saves the day with the perfect balance of compact size, light weight & low-noise to minimize fatigue on even the longest jobs
- UL-CERTIFIED – Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are NOT manufactured to North American safety standards & are NOT safety certified. Underwriters Laboratories “UL” is the industry standard for North American safety certification. UL Certification ain’t cheap, but we’re proud to say we won’t sell a heat gun without it
- AMERICAN BRAND – Tired of buying poor-quality “throwaway” products from overseas sellers who don’t care about their customers? Chandler Tool is a good ‘ol American brand, located right here in the greatest country on Earth – the United States of America. Though many of our tools are manufactured overseas, our company is located in America, we employ Americans & we pay American taxes, just like you
EnerTwist Heat Gun 1500 Watt Variable Temperature Control Hot Air Tool Kit Heating Protect for Shrink Wrapping, Paint Removal, Wiring, Tubing, Crafts, Vinyl Wrap, Automotive, Electronics Repair
- ▲VARIABLE TEMPERATURE – High Heat Adjustable 9-Temp & 3 Fan Speed features high/ low/ cool/ off 4 modes switch and 9-temp control via dialing the rear cover [ I: 140℉(60℃)@ 500 L/min, II: 176℉-572℉(80-300℃) @ 300 L/min, III:176℉- 932℉(80℃- 500℃) @ 500 L/min] can satisfy all your utility
- ▲POWERFUL & RELIABLE – Heavy duty hot air gun with 12.5 Amp motor heats up to maximum temperature 932℉(500℃) quickly in few seconds and performs stable. Professional heater gives outstanding performance by keeping running 500 hours in max temperature (data from lab)
- ▲ ERGONOMIC & SAFETY – Non-slip soft grip and weight balance design for easy-to-use, integrated hands free support stand allows the gun sit upright for hand-free use. With professional built-in overload protection prevents electric heat gun from over heating due to misuse
- ▲ VERSATILE ACCESSORIES – 4 Nozzle deflectors & 5 paint scraper kit extend heat gun utility, Reduction nozzle for welding plastics, solering/ de-soldering, shrink wrapping, loosening seized bolts & nuts. Glass protection nozzle for paint or adhesive stripping neat heat-sensitive materials. Wide jet surface nozzle for paint or adhesive removal. Reflector nozzle for heat shrinking tubing, shaping PVC tubes, thawing frozen pipes
- ▲WHAT YOU GET – 120V Heat Gun Kit with carrying case and 9 accessories. Best for shrink wrapping, crafting, embossing heating, painting, roofing, wire stripping, phone / auto glass repair, tint soldering/desoldering, plastic welding, PVC pipe bending, seized bolts & nuts loosening, replacing tile, waxing skis and snowboards, soften plastics as well as drying and thawing purpose
New Heat Gun,mofa Hot Air Gun Tools Shrink Gun with Stand For DIY Embossing And Drying Paint Multi-Purpose Electric Heating Nozzle 300W 110V (Purple,White)
- New heating tools,can be used in soft clay.Built-in stand for self-support and table top use
- Easy to use.New DIY handmade tools,production of heat shrinkable sheet,soft pottery stereotypes.
- New mini Heat Gun great for heat shrink tubing, embossing, drying paint, paper, fabrics, craft foams, glue, ink, DIY, firm shape, clay
- At heat gun tail, patent design circulating cooling system in both sides to reduce the internal temperature and extend the product duration.
- DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
Product Features:
Mini 300 watt heat gun. Fast and easy to use for multi-function DIY works.
Comfortable and lightweight heat gun, ideal for heat shrink tubing, embossing and drying a variety of paints, glues, and inks.
Built-in stand for self-support and table top use.
Specification:
Material: ABS Plastic
Length: approx. 22cm
Power Cable: approx. 1.8m
Working temp.: 350 ℃
Power: 300W
Voltage: 110V 50-60HZ
Weight: approx. 270g
Plug Type: US Plug
Mini Hot Air Gun, ZeopoCase Portable Mini Heat Gun for DIY Embossing Shrink Wrapping Drying Paint, 300W Multi Function Electrical Heat Tool
- Easy to use, Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed
- Made of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable.
- Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
- The temprature can not be adjusted, but it can reach at about 200°C/390°F within a few seconds abstractly which heat up quickly and works like a charm
- WHAT YOU GET – 1*Hot Air Gun, 1*Detailed Instructions, 1*Additional replaceable protecting cap, 12 month Warranty, [100% Money Back Guarantee] If you’re not happy for any reason, simply contact us and we’ll give you a full product refund, no questions asked and no need to return the product.
This excellent compact electrical heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun
FEATURE:
Size: 220*43mm / 8.7*1.7inchs, wire length 91cm/36inchs
Type: Constant temperature
Working temperature: It can reach at about 200°C / 390°F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz
Notes:
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Packing details:
1*Hot Air Gun
1*Detailed Instructions
1*Additional replaceable protecting cap
Product Warranty
[QUALITY ASSURANCE] ZeopoCase offer 12 month warranty time for the product.
If you’re not happy for any reason, simply contact us and we’ll give you a full product refund, no questions asked and no need to return the product.
Mlife Mini Heat Gun – 300 Watt – Dual-Temperature Heat Tool with 6.5FT Power Cord for DIY Acrylic Resin Cups Tumblers Embossing Shrink Wrapping Paint Drying Crafts Electronics DIY (Purple)
- Get tired of burning your job or blowing powder everywhere? Try Mlife heat gun to save your time and effort! Low speed/heat setting for detail work, high speed/heat setting gets big jobs done quick!
- Mlife heat gun can be used for epoxy resin, embossing project, heating shrinkable film, embossed powder, rubber stamp. Two option of heat/speed setting(200℃/300℃), 6.5ft-length power cord, perfect for your detail work or big job of DIY craft!
- Pencil-like heat gun design meet delicate need of resin projects. Retractable bracket for hands free operation for cup acrylic making. Handle part adopts salient point nonskid designs and fits comfortably in the user’s hand.
- Built with a heat sink, stabilize the internal temperature of the hot air gun and achieve a long-lasting performance. Over-heat protection, automatically stop when it overheats, ensure your family safety.
- Mlife City is committed to providing each customer with the best quality products and the highest standard services. Full refund or replacement is available if you are not satisfied with our Mini Heat Gun, Please be assured of the purchase.
Mlife Mini Heat Gun
The Mlife epoxy tumbler heat gun with TWO temperature settings for maximum versatility. High heat (300℃/572℉) for big jobs. Low heat (200℃/392℉) for detail work. All packaged in a compact insulated body for comfortable prolonged use, the Mlife Heat Gun is perfect for a variety of crafting projects such as making epoxy glitter tumblers, embossing, shrink wrap, paint & lacquer drying & paint removal, as well as many electronics projects!
Mlife is dedicated to offering the largest comprehensive selection of epoxy resin tumbler making, casting and coating products. Our mission is to provide affordable, on-trend resin tumbler supplies that inspire creativity for our customers.
Whether you enjoy cosmetic grade epoxy blending, mixed media for embellishments like decorative bling glitter, sequins, mylar flakes, dry flowers, beads, foil, shell, or the latest craft trend on Youtube, the Mlife resin tumbler tool sets give you the freedom to unleash your inner artist any time the mood strikes.
Specification
Wagner Spraytech Wagner 0503038 HT400 Heat Gun 650ᵒF Basic pack
- DURABLE HEAT GUN: The HT400 precision heat tool is a versatile tool for home, shop and hobby projects and has a 650°F (343°C) temperature setting
- MANY APPLICATIONS: This versatile heat gun tool can be used for electrical repair, embossing, stripping paint, bending plastic pipe, shrink wrapping and tubing, and more
- PRECISE CONTROL: Small size makes this an ideal heating tool for getting into hard-to-reach places and concentrating high heat on small areas
- COMPACT DESIGN: Pencil-like design and 360 watts of power makes this heat tool great for delicate projects. The power tool fits comfortably in the user’s hand and weighs only a pound
- HANDS FREE FEATURE: Use the installed, retractable stand for hands free operation to easily complete all of your household heating and electrical projects
Product Description
The HT400 Precision Heat Tool is a versatile tool for home,shop and hobby projects. Its small size is ideal for getting into hard to reach places and working on delicate projects related to crafting and electronics. Its simple design has one temperature setting of 650ºF and an integrated stand for hands-free work.
From the Manufacturer
The HT400 Heat Gun gives outstanding performance in a small package. The heat gun is ideal for crafts and hobbies. Use it to apply embossing powders, applique and shrink wrap. Remelt adhesives and form plastic material. It is also great for applying electrical shrink wrap.
Mini Heat Gun, Hot Air Gun Tools Shrink Gun with Stand For DIY Embossing And Drying Paint Multi-Purpose Electric Heating Nozzle 300W 110V (White)
- General purpose heat gun for crafts ,DIY and stripping paint.
- At heat gun tail, the heat vents designed in both sides to reduce the internal temperature and extend the product duration.
- Embossing dryer, DIY equipment for heating Shrinking film, mud toys and other items. good tool for ceramic creations.
- Two pin US plug and 1m / 3ft cable and built-in stand for self-support and table top use.
- 【ATTENTION PLEASE】All of the “floweryocean” Mini Hot air Gun are sold only by “Oceanflowery”, in order to offer all the customer’s a pleasant shopping experience, we will take responsibility to all our customer purchased from us.Please DO NOT trust any counterfeit seller. Thanks for your support!
Product Features:
- Mini 300 watt heat gun. Fast and easy to use for multi-function DIY works.
- Comfortable and lightweight heat gun, ideal for heat shrink tubing, embossing and drying a variety of paints, glues, and inks.
- Built-in stand for self-support and table top use.
Specification:
- Material: ABS Plastic
- Length: approx. 24cm
- Power Cable: approx. 1m
- Working temp.: 200 ℃
- Power: 300W
- Voltage: 110V 50-60HZ
- Weight: approx. 310g
- Plug Type: US Plug
Package Includes:
- Heat Gun x1
- Manual (English) x1
Instructions:
- Power on the heat air tool.
- Hold the product as shown on the picture.do not touch the hot nozzle.
- Keep 5-6cm distance between the heat tool and item.
- Suggest do not continuously use more than 10 minutes to prevent overheated.
Similar items with 4 stars and above
Paint Heat Gun for Craft Epoxy Blower Hot Air Heater for Embossing Stamps PVC Resin 300 EVA Tubing Pen Shrink Tubing Heatcraft Heady Blow Wax Emboss Hotmelt Foam Wrap Tool for Phone Cellphone (Pink)
- ★【Embossing dryer】: Mini holder heat gun for equipment heating Shrinking film, mud toys and other items. good tool for ceramic creations.
- ★【Shorter warm-up time】 : Made by High-tech PTC,The Glue Sticks instant heats up within 3-5 minutes.And easy to Remove Air Bubbles .110V voltage,New Arrival US Standard,no need voltage converter any more.
- ★【Easy Hands Free Feature】: Use the installed, retractable stand for hands free operation to easily complete all of your heating for cup acrylic making.Convenient to use, no need for gloves and don’t get your fingers sticky, no mess in applying epoxy and glues.
- ★【High Quality Material】: Our Bubble Remover Gun is made from top quality materials of ABS plastic, copper, steel, precisely molded and processed by advanced CNC technology.Built in a heat sink makes the internal temperature of the Hot Air Gun is reduced and life is prolonged.
- ★【WIDE USAGE】：It ensures steady blowing at a certain hot temperature to remove annoying bubbles in colorful or crystal clear pigments for epoxy resin mixing,lab, education demonstration, slime, clay, paint, craft, molding, casting, stain making.
Mini Handheld Heat Gun, FUUBARBAR Embossing Stamps PVC Resin 300 EVA Tubing Pen Shr
★Characteristics：
1：Hand-held DIY hot air gun, 2-3 seconds to quickly heat up, more convenient to dry and shape your work
2：Material ABS plastic, stainless steel bracket，with CE-ROHS certification, you can use with confidence
3：ON/OFF switch, safe and convenient switch design makes it easier and more convenient to heat gun
4：Built-in overheat protection device can reduce the use temperature of the heat gun, and the product has a heat dissipation port on both sides to prolong the service life
5：The 100° rotating steel frame is a great help for your uninterrupted use. The steel machine not only keeps the bubble remover at a certain distance from your tumbler crafts, but also allows you to pause it at any time without hurting the work
★Specifications：
1：Color: Pink(body) + White(protecting cap)2：Package dimensions：11.8 x 3.4 x 2.1 inches
3：Product Size：9.8 x 1.9 x 1.9 inches
4：Rated voltage: 110V
5：Weight: 0.5IB
6：Power: 50-60Hz
7：Rated power: 300W
8：Product line length: 39.3 inches
9：Operating time: 10 minutes
10：Package：a bubble gun and a manual
★Note when using the heat gun
1：Keep 0.3inch away from the air outlet
2：Keep a distance of 0.1-0.2inch from the work, and heat it at a 45° angle until the work is completed
3：Do not use a heat gun to heat the work directly at 90°
4：If the handle temperature rises significantly, turn off the power and wait for cooling. It is recommended to use 2-3 minutes each time
5：Do not let your child use this product alone
6：This product cannot adjust the temperature, please do not touch the hot nozzle directly. You need to wait for him to cool down before continuing to use it.
Conclusion
By our suggestions above, we hope that you can found heating gun for crafts for you.Please don’t forget to share your experience by comment in this post. Thank you!
