yesallevent 
Nowadays, there are so many products of heating cartridge wanhao in the market and you are wondering to choose a best one. You have searched for heating cartridge wanhao in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating cartridge wanhao which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
BCZAMD 12V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 12V 50W Ceramic Cartridge Heater
Signstek 10 PCS Reprap 12V 40W 620 Ceramic Cartridge Heater for 3D Printer Prusa Mendel
BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 24V 50W Ceramic Cartridge Heater
Signswise 5pcs Reprap 24V 40W Ceramic Cartridge Heater for 3D Printer Prusa Mendel
WINSINN Removable 12V 40W Heater Cartridge 620 Ceramic Hotend Works with Creality Ender 3 5 CR10 CR-10 CR10 Anet A8 3D Printer (Pack of 5Pcs)
►Removable design, easy to install:))
►Voltage: 12V
►Power: 40W
►Heating head size: 6 x 20mm
►Total length:1 Meter
►Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc
—————————————————————————————————————
Package include:
►5 x 12V 40W ️Removable Ceramic Cartridge Heater
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
Ewigkeit 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs)
- 24v cartridge Heater is made of 304 stainless steel material,Diameter: 6mm
- Length: 20mm
- Voltage: 24v, Power: 40w, Conveniently pre-wired with 1 meter long high temperature resistant wire
- Easy installation, wide temperature range, good stability, high reliability provide a high corrosion prevention
- Heating cartridges work with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc
- 5pcs of 24V 40W 620 ceramic cartridge heater for 3D printer hotend
Wanhao Duplicator i3 Plus Cartridge Heater Tube wanhao Heater Cartridge Style Heater Tube for Wanhao Duplicator
This is the heating tube to Duplicator i3 Plus.
Item specifics:
Model number: Duplicator i3 Plus
Item type: Cartridge Heater
Name: Wanhao
Version: Duplicator i3 Plus
Power: 24V 40W
Heater Cartridge 12v – Monoprice Maker Select v2 – Wanhao Duplicator i3 3D Printer
Zamtac 1pcs Wanhao Duplicator 6 Cartridge Heater Tube Heater Cartridge for Wanhao Duplicator6 D6-Heating Tube Spare Parts
1pcs*24V 40W heater cartridge Duplicator 6 for DIY Wanhao 3D printer
Wanhao Heating Cartridge for Duplicator 6.
.
Item specifics:
Model number: Duplicator 6
Item type: Cartridge Heater
Name: Wanhao
Version: Duplicator 6
Power: 24V 40W
Diameter: 5.5mm
Mercurry 12V 40W 620 Ceramic Cartridge Heater (2 PCS)
Conclusion
By our suggestions above, we hope that you can found heating cartridge wanhao for you.Please don’t forget to share your experience by comment in this post. Thank you!
