Best Heat Transfer Cooling Block

Specifications:

Model: UPR-2018
Color: Silver
Material: Copper + PMMA + Anode Aluminum
Power Port: Small 3pin

Applicable Platform: am2 / am2+ / am3 / am3+ / am4
Size: 105 * 75 * 20 mm / 4.1 * 3.0 * 0.8in (As Pictures Show)
Weight: Approx. 412g

Package List:
1 * Water Cooling Block
1 * Baseboard
4 * Screw
1 * Bag of Silicone Grease

This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend

Yesker 3 Pack Teflon Sheet For 16×20 Heat Press Transfer Sheet SUPER SALE LIMITED TIME

Add up to 4 devices with the efficient, effectual Sabrient 4-Port USB 3. 0 hub. The thin, lightweight design makes the Sabrient 4-Port USB 3. 0 hub a great travel companion to expand your laptop’s USB 3. 0 port into four. Fully backwards compatible with the USB 2. 0/1. 1 products. Additionally, each port has its own power switch, allowing for individual port control. with SuperSpeed USB 3. 0, you can now transfer data at up to 10 times the speeds of the older USB 2. 0 standards. Speeds of 5Gbps are a vast improvement over USB 2. 0’S 480Mbps top speed. The Sabrient 4-Port USB hub utilizes the most advanced technology, but it is also backwards compatible, allowing you the capability of using USB 2. 0/1. 1 products If need be. please note: 2. 4GHz wireless devices, such as wireless keyboard and mouse adapters, may not work in close proximity to USB 3. 0 devices or hubs. Connecting to a USB 2. 0 port is recommended. for a stable connection, The devices connected to the 4-Port USB 3. 0 hub must not exceed a combined current of 5 Volts 900 mash. External hard-drives should be connected to an external power source. This 4-Port USB 3. 0 hub will not charge your devices, It will only sync.

Aluminum Water Cooling Block:

Specifications:
– Product Size: 40 x 80 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption

Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.

Package Content:
1 X CPU Water Cooling Block

IC Graphite Thermal Pad is a thermal interface alternative to thermal paste for CPU’s, GPU’s and Game stations. This product features top tier thermal performance that is uniquely stable across a wide temperature range -200C to +400C and when used long term should last the life of most electronic components. IC Graphite is 100% pure graphite, non toxic this pad is a solid state modular solution no messy applications to clean, no guessing if you have used the proper amount, just place pad and mount sink. Caution: IC Graphite is electrically conductive! Any contact with electrical components when the computer is turned on can permanently damage the components.

Thermaltake Massive TM Notebook Cooler

Massive TM notebook cooler, thin and light, designed with Thermaltake the first ever adjustable temperature sensor, display control panel, aluminum design and dual 120mm temperature regulated fans to suit user’s preference in accordance with the laptop size or various heat generated points to create the best thermal performance. The excellent ergonomic design makes the most comfortable viewing angle and hand position.

P/N: CL-N002-PL12BL-A
Compatibility: For 10”~ 17”Notebook
Dimension: 390 x 277.5 x 49.3 mm
Fan Dimension: 120 x 120 x 18 mm x2
Color: Black
Material: Aluminum + Plastic
Rated Current: 0.46 A
Rated Voltage: 5V
Fan Speed: 1000 R.P.M ( Turbo 1300 R.P.M )
Noise: 31 dBA
Air Flow: 61.27 CFM
Air Pressure: 1.59 mm-H2O
Sensor: 0 ~99 F

Feature:
Internal flow channel extrusion forming
Brazing parts into a whole
Leak rate of less than 5X10-6 mbar.l/s parts
Internal fin thickness 0.5MM
Spacing: 1 MM
Processing: vacuum aluminum brazing
Surface treatment: Blue oxidation
Applicable to computer CPU water, industrial inverter driver,laser head cooling, industrial control cabinet cooling ,etc.
Size:41.5x162x12mm;

Package Includes:
1 x CPU Water Clooing Block

Conclusion

By our suggestions above, we hope that you can found heat transfer cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!