Best Grey Water Cooling Liquid

Deal Score0
Deal Score0
  • Best Grey Water Cooling Liquid
  • Best Grey Water Cooling Liquid
  • Best Grey Water Cooling Liquid
  • Best Grey Water Cooling Liquid
  • Best Grey Water Cooling Liquid
  • Best Grey Water Cooling Liquid
  • Best Grey Water Cooling Liquid

Nowadays, there are so many products of grey water cooling liquid in the market and you are wondering to choose a best one. You have searched for grey water cooling liquid in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings grey water cooling liquid which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

Best results for grey water cooling liquid

Bykski B-PMS5-NX Automatic Speed Control D5 Water Pump for Computer Water Cooling Liquid (Grey)

$77.69$110.99$126.53
Last update was on: Sunday, December 29, 2019

Color:Grey

100% new, fine workmanship, simple sense is very strong!
Model:B-PMS5-NX
Color:Grey
Material:ABS resin+PMMA
Driving mode:Sine wave
Driving technology:Super durable PCB,solid state capacitance and patch sensor
Load speed:Max5000rpm
Power waste: DC 12V, TDP18W
Voltage range:10V-15V
Maximum flow rate:1100L/H
Working temperature:4000rpm speed at 45℃
Type of pump cover:Imported D5 pump cover
Qdistance:3.8 meters
Signal interface:Large 4Pin+PWM+data feedback
Product size:80*80*82mm

Similar items with 4 stars and above

EKWB EK-Tube Zero Maintenance Soft Tubing, 9.5/15.9mm (3/8" ID, 5/8" OD), 3 Meter, Black

$17.19$24.55$31.42
Last update was on: Sunday, December 29, 2019

EK ZMT (Zero Maintenance Tubing) is a high quality, zero maintenance, industrial grade EPDM rubber tubing in stylish matte black.

This tubing is – just like Norprene – designed to withstand harsh conditions for a very long period of time, offering a truly exceptional lifespan even under UV, ozone and heat exposure for many years.

Unlike most PVC and PUR tubing this high quality EK made EPDM rubber tubing ensures long lasting operation and does not suffer from a plasticizer leaching effect which can cause blockage (gunking) in your liquid cooling loop. This 9,5/15,9mm (ID/OD) tubing also allow for very small bend radius!

This may not be the tubing for everyone but it is guaranteed to be hassle-free even in the long run which is something other PVC/PUR tubing cannot offer!

Model: 3830046999214

Arctic MX-4 – Thermal Compound Paste for Coolers | Heat Sink Paste | Composed of Carbon Micro-Particles | Easy to Apply | High Durability – 4 Grams (1 Pack)

$6.99$9.99$12.49
Last update was on: Sunday, December 29, 2019

Thermal Compound for All CoolersEasy to ApplyWith an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.Safe Application:It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.High Durability :In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years. Value for MoneyA high performance thermal compound perfect for system builders, there’s no suprise that the MX-4 exceeds your expectations for its low price tag. Thermal Conductivity 8.5 W/(mK) Viscosity 870 poise Density 2.50 g/cm³ Volume Resistivity 3.8 x 1013 Ω-cm

Noctua NF-P14s redux-1500 PWM, High Performance Cooling Fan, 4-Pin, 1500 RPM (140mm, Grey)

$10.47$14.95$21.83
Last update was on: Sunday, December 29, 2019

Mayhems Pastel Nano Coolant Premix, 1000mL, Pastel Light Gray

$9.06$12.94$16.18
Last update was on: Sunday, December 29, 2019

Color:Pastel Light Gray

Mayhems Pastel range of coolants have been in development for over two years, with co-operation between Ice Dragon Cooling and Mayhems. This new range of liquids surpasses anything in the market place at the moment in time, with its outstanding colours and cooling power.

Mayhems new pastel range incorporates many differing technologies into one product, from dyes to nano fluids and of course a little Mayhems magic. With a system working life of about two to three years, of which is due to a design that is intended for prolonged use.

Can be used with all of Mayhems Dyes to make your own colours.

  • Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards
  • Very low oral toxicity, less than propylene glycol
  • -8c freezing point
  • Mobilises to prevent scale or sludge filming
  • Boiling Point : up to 95° C (pressure dependent)
  • Can be stored for up to three years, within in a cool dry environment

The system must be clean and have no chemicals of any kind left in the loop. There must be an absence of bleach, biocide and anti corrosive inhibitors. We recommend you flush your system with Mayhems Blitz Cleaning System before use.

Mayhems Pastel has biocides and inhibitors included within the mixture so do not add any extras except dye.

Warning: Contains Zinc Oxide. Do not dispose of down the drain. This is harmful to the environment. Please dispose of in safe appropriate manner. Store in a cool dry place out of reach of children and animals.

Disclaimer:- Not For Use with Aluminium Radiators Mayhems internal testing has seen severe issues with Aluminium Radiators and as a consequence we do not support the use of any Mayhems Pastel Coolants with these Radiators.

Does not contain ethylene glycol

Model: MPLG1LTR

G1/4 Anti-Off Fittings Drop-Proof for Hard Tubings PC Computer Watercooling Compression Fitting 4pcs in One Pack (for 14mm OD Tubings, Silver Grey)

Last update was on: Sunday, December 29, 2019

Size:For 14mm OD Tubings |  Color:Silver Grey

Compression fitting is designed for 14mm OD hard tubings.
High-Flow and Leak-Free Structure.
Easy Installation.
Sustain drag force weight upto 15kg.

What’s in the box?

4 x G 1/4 compression fittings for PC computer water liquid cooling rigid / hard tubings loop.

Bykski D5 Liquid Cooling 12V Pump – PWM Enabled – Grey Mount (B-PMS5-NX-NA)

$66.47$94.95$115.84
Last update was on: Sunday, December 29, 2019

The Bykski D5 Liquid Cooling 12V Pump Motor is a high reliability, high pressure industrial pump, featuring PWM speed control. Like most other D5 pumps this reliability is afforded by the same unique design as the original pump, which contains only one moving part: the magnetically driven spherical impeller spins on a single ceramic bearing, thus extending the life of this pump beyond existing standards.

 The pumps data and speed control is done using the PWM 4-pin connector.  By connecting this the pump speed can be controlled via the computers similar to a CPU fan speed.  This also allows the safety feature of auto shut down based on RPM feedback if available in your BIOS.

Specifications

  • Power:12V / TDP18W
  • Voltage:10V-15V
  • Power Connector:4-Pin Molex
  • Speed Control/Data:4-Pin PWM
  • Working Temp:45C at 4000RPM
  • Max RPM:4800
  • Maximum head:12.4 ft (3.8 m)
  • Maximum discharge:~ 290.5 GPH (1100 LPH)
  • Performance will vary based on housing used
  • Top Material:Clear
  • Thread:G1/4
  • Stand Color:Black
  • Included Parts

  • 1x Bykski D5 Liquid Cooling 12V Pump – PWM Enabled 
  • 1x Colored Mounting System
  • Warnings
    Use of caustic and/or abrasive coolant will void your warranty and may cause your pump to fail.
    Do not run the pump dry. The D5 and DDC range of pumps are designed as self lubricating. This means the fluid that the pump is designed to push/create flow is also used to lubricate the internal pump parts. This design means you shouldn’t run the pumps without fluid for any reason.
    Tyler Direct is not responsible for any hardware damage. Use at your own risk.

    PrimoChill True Infused – Insanely Concentrated Liquid Pre-Mix (8oz) – Opaque Gray

    $20.97$29.95$41.63
    Last update was on: Sunday, December 29, 2019

    Opaque True is a breakthrough in showcase coolant. The solid color will set the edge on your next build and provide stunning pictures of beauty to be appreciated by all. Opaque is classified as a showcase style coolant but performance is comparable to any of its transparent counterparts.

    True Opaque may lose its original color when added to your loop within the first 24-48 hours. This is a common, well known occurrence. If this happens, immediately drain and flush with DI or Distilled water. Once the system has been drained and cleaned, refill your system with True Opaque fluid once again. True Opaque will over time help neutralize your cooling loop, which will then stabilize the color.

    As with all Opaque fluids, buildup of particles in the micro channels of water blocks will occur over time. This buildup can cause the fluid in your system to flow slower and possibly stop flow all together. System pressure also plays a role in how well True Opaque performs. The combination of high pressure loops and microchannel water blocks will accelerate the breakdown of True Opaque coolant. If you notice ANY collection or separation of True Opaque, drain and rinse your system IMMEDIATELY. Running Opaque coolant after it has separated can cause unknown issues and may require the user to open, and clean each individual component in the system.
    WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

    Opaque True? Instructions (Full instructions included with product)
    1. Finish Opaque Sys Prep Instructions. (Requires 48 Hour minimum flush time for new builds and existing system refills).
    2. Mix 8oz Opaque True w/ 1 gallon distilled water.
    3. Shake casually to incorporate the pre-mix w/ the water.
    4. Fill your system w/ fluid using your preferred priming method.

    Bykski Mini DDC Pump Reservoir Combo w/Armor – Grey (B-Tank-DDC-MI)

    $69.97$99.95$143.93
    Last update was on: Sunday, December 29, 2019

    The Bykski Mini DDC Pump Reservoir Combo w/ Armor is a complete pump / reservoir kit. The extreme specifications of this DDC are unmatched and make for a very powerful and compact solution for your liquid cooling loop.  The clear PMMA top allows you to see fluid colors through it.    With industry standard G1/4 ports, this kit can accept most fittings. The pump is powered by a standard 4-pin power connector and monitor line.

    Specifications

  • Top Color:Clear
  • Top Material:Clear PMMA
  • Heatsink Material:Aluminum
  • Pump Model:B-PMD3-X
  • Power:Standard 4 pin power connector and a PWM 4-Pin header
  • Voltage Range:10V – 15V DC
  • MTBF (Mean Time Between Failure):50,000 hours equivalent to 5 years lifetime
  • Maximum discharge:~ 132 GPH (600 LPH)
  • Max RPM:5000
  • Dimensions:62 x 62 x 102.6mm
  • Performance will vary based on cooling loop dynamic
  • Included Parts

  • 1x Bykski Mini DDC Pump Reservoir Combo w/ Armor
  • Warnings
    Use of caustic and/or abrasive coolant will void your warranty and may cause your pump to fail.

    Tyler Direct is not responsible for any hardware damage. Use at your own risk.

    Water Cooling Reservoir DDC Pump Combo for Computer Water Cooled System G1/4 Threads Mini Water Tank (Silver Grey)

    Last update was on: Sunday, December 29, 2019

    Color:Silver Grey

    Bykski reservoir and DDC pump for the ultimate in custom PC watercooling configurations. Featuring exceptional performance and unrivalled reliability.It is the right choice for PC enthusiasts.

    The RBW RGB light is assembled already.

    The RBW lights will make multiple color to show at the same time.

    Auto-speed transmission DDC pump.
    The mounting bracket in package for your convenience to fix it.

    Threads: G1/4″
    Material: Acrylic + Aluminium Alloy
    Max Head: 4m / 13.12 Feet
    Max Speed: 5000rmp
    Max Flow: 45L/Hr
    Pump Voltage: 12V
    LED Light Voltage: 5V
    Pump Power Connector: Large 4pin
    RBW RGB LED Stripe Power Connector: 3pin
    Dimension: 62 x 62 x 102.6 (mm) / 2.44 x 2.44 x 4.03 (inches)

    Package Includes:

    1 x Watercooling Mini Reservoir DDC Pump Combo
    1 pack of accessories
    1 set of remote control and RGB light controller
    The mounting bracket is included.

    Conclusion

    By our suggestions above, we hope that you can found grey water cooling liquid for you.Please don’t forget to share your experience by comment in this post. Thank you!

    10 Total Score
    Excellent

    Best grey water cooling liquid: Top-Rated Brands & What to Buy

    User Rating: 4.52 (689 votes)