The 9 Best Ditra Heat Touchscreen Programmable Floor Heating Thermostat

Schluter-DITRA-HEAT-E-R is a programmable touchscreen thermostat used to control DITRA-HEAT-E-HK heating cables. 3.5” intuitive touchscreen display 6 programming periods per day Ability to track and log power consumption Set-up wizard QR code for quick access to system settings Supports 120 V and 240 V cables 5 mA built-in GFCI Floor temperature sensor included Sleek design WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

DITRA-HEAT-E-WiFi is a programmable WiFi touchscreen thermostat used to control theheating cables 120 V or 240 V. The thermostat features a built-in Class A ground fault circuit interrupter (GFCI) and includes a floor temperature sensor. DITRA-HEAT-E-WiFi is operated via LCD touchscreen controls and features a pre-set schedule for convenience, which may be programmed to fit any schedule. When connected to WiFi, the thermostat provides convenient monitoring and adjustment of the floor warming system via the web or mobile app. Two heating cables may be connected to the thermostat, up to the total heating load limit of 15 amps. The DITRA-HEAT-E-RR power module may be used in conjunction with the thermostat when the heating load exceeds 15 amps (e.g., in large floor applications) to maintain a single point of control. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

DITRA-HEAT-E-R is a non-programmable digital thermostat used to control the DITRA-HEAT-E-HK heating cables (either 120 V or 240 V). The thermostat features a 5 mA built-in ground fault circuit interrupter (GFCI) with indicator light and includes a floor temperature sensor. DITRA-HEAT-E-R is operated via a simple on/off switch. Two heating cables may be connected to the thermostat, up to the total heating load limit of 15 amps. The DITRA-HEAT-E-RR power module may be used in conjunction with the thermostat when the heating load exceeds 15 amps (e.g., in large floor applications) to maintain a single point of control.

Schluter-DITRA-HEAT-E-KIT is an all-inclusive package containing the DITRA-HEAT uncoupling membrane, DITRA-HEAT-E-HK heating cable, and DITRA-HEAT-E-RT touchscreen programmable thermostat. Combine the beauty of tile with the comfort of an electric floor warming system—adding luxury to any room The kit contains the DITRA-HEAT uncoupling membrane to prevent tiles from cracking, heating cable, and either a white programmable or touchscreen thermostat Customizable heating zones can be created by placing heating cables wherever heat is desired Easy to install; no need for clips, fasteners, or self-levelers Minimizes assembly thickness for easy transitions to lower surface coverings WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Combine the beauty of tile with the comfort of an electric floor warming system—adding luxury to any room. 

Ditra Heat DHEKRT12040 Eco Comfort Kit Includes

• DITRA HEAT CABLE – (26.7 sq ft, 120 Volts) – The cable is specifically designed to be used with the Ditra Heat Sheets. Do not cut or modify the cable in any way, as this may change the cable resistance. 3 1/4 inch spacing should be left between cable runs as narrower spacing may cause fire or damage to the floor covering and wider spacing may result in insufficient power to warm the floor. 
• TOUCHSCREEN PROGRAMMABLE THERMOSTAT – The DHERT102/BW Ditra Heat thermostat is designed to control radiant floor heating cables.
• 43.1 SQ FT DITRA HEAT MEMBRANE – Included as 5 sheets of membrane (8.6 sq. ft each)
•  Nuheat MatSense Pro electric fault indicator (loudmouth monitor) sounds an alarm if the heating wire is cut or damaged.
• Suntouch plastic 3/8″ x 1/2″ U-notch cable trowel is designed specifically for heat cables installation

Combine the beauty and durability of tile with the comfort of a radiant electric floor warming system to bring a touch of luxury into any room of the home.

• Schluter DITRA-HEAT electric floor warming system incorporates uncoupling crack prevention technology that can absorbed small movement of the substrate and prevent tile from cracking.
• Cables can be placed wherever heat is desired for customized heating zones, and no levelling compounds are required, which makes for a quick and easy installation.
• With the proven technology of DITRA-HEAT uncoupling membrane incorporated in the design, the Heat Kit provides the ideal solution for bringing comfort and floor warming to any tiled floor.

Schluter 64 SqFt 120V Ditra Heat E Kit Includes:

• DHEHK12064 Heat Cable
• DHERT102/BW Touchscreen Programable Thermostat
• 94.6 SqFt of Ditra Heat Membrane
• 3 Bags of Laticrete Thermal Pack – Eliminates cold spots between wire meaning that thermal heat diffusion is increased by 20%. Thermal Pack must be used with grey color modified mortars (thinset).

STRATA_HEAT Thermostats are smart, “Floor Focused”, these new innovative thermostats are specifically designed to work with floor heating systems. Wi-Fi compatibility offers remote control through your smart phone to control and view energy statistics from anywhere. The STRATA_HEAT Thermostats are dual voltage (120V/240V), and easy to use.

Combine the beauty of tile with the comfort of an electric floor warming system—adding luxury to any room. 

Ditra Heat DHEKRT12056 Eco Comfort Kit Includes

• DITRA HEAT CABLE – (37.5 sq ft, 120 Volts) – The cable is specifically designed to be used with the Ditra Heat Sheets. Do not cut or modify the cable in any way, as this may change the cable resistance. 3 1/4 inch spacing should be left between cable runs as narrower spacing may cause fire or damage to the floor covering and wider spacing may result in insufficient power to warm the floor. 
• TOUCHSCREEN PROGRAMMABLE THERMOSTAT – The DHERT102/BW Ditra Heat thermostat is designed to control radiant floor heating cables.
• 60.3 SQ FT DITRA HEAT MEMBRANE – Included as 7 sheets of membrane (8.6 sq. ft each)
•  Nuheat MatSense Pro electric fault indicator (loudmouth monitor) sounds an alarm if the heating wire is cut or damaged.
• Suntouch plastic 3/8″ x 1/2″ U-notch cable trowel is designed specifically for heat cables installation

Conclusion

By our suggestions above, we hope that you can found ditra heat touchscreen programmable floor heating thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!