yesallevent 
Nowadays, there are so many products of cooling heat sink 62 in the market and you are wondering to choose a best one. You have searched for cooling heat sink 62 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling heat sink 62 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
BQLZR Huge TEC1-12730 253W Thermoelectric Peltier Cooler Cooling 62mm x 62mm x 4.8mm
- Operates in 12 volts DC and >
- 30 amps to make it works fluently.
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
- This device must be used in conjunction with a heat sink to avoid burned. Can’t exceed 50 degrees
- Solid state, vibration free, noise-free.
- Output cooling power: 253W
100% Brand new , never used
Item’s color might be different from the picture because of the aberration.
Feature:
Solid state, vibration free, noise-free.
Simple to install and operate.
Each device is fully inspected and tested.
Fitted with 2.85 inch insulated leads .
Perimeter sealer for moisture protection.
This device must be used in conjunction with a heat sink to avoid burned.
Get cooling in minutes by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
MODEL: TEC1-12730(TE is the abbreviation of Thermo-Electric)
Maxiumu power consumption :456 Watts
Output cooling power: 253W
Operates in 12 volts DC and >30 amps
Maximum temperature difference: △Tmax (Qc=0) Above 65°C.
Operating current: Connect with sufficient power supply at 12V 30A
Size: 62mm x 62mm x 4.8mm
Weight:62g
Note: Make sure the cooler with enough cooling, the temperature of the heat surface can not exceed 50 degrees.
Package include:
1 x TEC1-12730 Thermoelectric Peltier Cooler
Nxtop Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Led Amplifier Transistor Semiconductor Devices with 100mm (L) x 69mm(W) x 36mm(H)
- Made of high quality Aluminum, good thermal conductivity
- Reduce the risk of hardware failure due to overheating
- Maximize surface area Designed in contact with the cooling air. The 23pcs fins increase the area of the board and thus provide for greater heat transfer
- Widely used for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
- Please make sure that the size of the heat sink fits that of your component
A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device’s temperature at optimal levels. In computers, heat sinks are used to cool central processing units or graphics processors. Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as light emitting diodes (LEDs), where the heat dissipation ability of the component itself is insufficient to moderate its temperature. Specifications: 100% Brand New High Quality Material: Aluminum FINS Number: 23 Size: 3.93″(L) x 2.71″(W) x 1.41″(H)/ 100mm (L)x 69mm(W) x 36mm(H) Quantity: 1 Weight: 223g (approx.) Used for : Various mini DC converter circuit board computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc. Package: 1x Aluminum Heat Sink Cooling Fin Note: 1. Please check the specification table and make sure that the size of the heatsink fits that of your component. Thank You! 2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding. 3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
DAOKI 2PCS TEC1-12706 12V 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 6A
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
- Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts
- These devices must be used in conjunction with a heat sink to avoid burned
- Each device is full inspected and tested
- Fitted with 6-inch insulated leads
Description:
Model: TEC1-12706
Size: 40mm x 40mm x 3.8mm
Operates from 0~15V DC and 0~5.8A
Operates Temperature: -55 to 83
Max power consumption: 65 Watts
Original box: NO
Net weight: 22g
Package weight: 31g
Color: White
Package Content:
2 x Thermoelectric Cooler
Scythe Big Shuriken 3 Low Profile 120mm Air CPU Cooler(69mm Height), Intel LGA1151, AMD AM4/Ryzen
- Low profile cooler perfectly fits Small Form Factor PC(Mini ITX, HTPC Case), BS3 is 9mm higher than previous version(SCBSK-2100: 59mm). Asymmetric and offset design for excellent compatibility with Mini ITX, Micro ATX motherboards and high-end RAM on the market. Premium model for Intel Core i9, i7, i5, i3 and AMD Ryzen.
- Included Kaze Flex 120 slim PWM fan using Sealed Precision Fluid Dynamic Bearing for long lifespan of 120000hrs(MTTF) and silent operation. ** In case the “CPU FAN ERROR” message is displayed by the UEFI (BIOS), please adjust the UEFI fan speed settings (“CPU Fan Speed Low Limit” – Option). ※Settings will vary according to your type of motherboards. Please consult your motherboard instructions**
- Copper base and 5 x 6mm heatpipe design, the cooler is equipped with new Kaze Flex 120 slim fan(15mm thickness), and has option using standard 25mm thickness fan for greater cooling performance for high TDP processor(9900k, 9700k, 9600k)
- HPMS III spring loaded mounting system is easy to install and secure for INTEL LGA 775, 1150/1151/1155/1156, 1366, 2011(V3) Square ILM, 2066 Square ILM & AMD AM2(+), AM3(+), AM4, FM1, FM2(+). (Original backplate required for AMD sockets)
- Product dimension: (W)122 x (D)122 x (H)69 mm, Weight: 475g. Incompatible case: RVZ02, MI-6, Ghost S1, Dancase A4-SFX, SG13, S4 Mini, Inwin Chopin, Node 202,
Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Transistor Semiconductor Devices with 16 Pieces fins 120mmx 100mm x 18mm (2 Pieces)
- Made of high quality Aluminum, good thermal conductivity
- Reduce the risk of hardware failure due to overheating
- Maximize surface area Designed in contact with the cooling air. The 16 pcs fins increase the area of the board and thus provide for greater heat transfer
- Widely use for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
- Size: 4.7″(L) x 3.93″(W) x 0.7″(H) /120mm(L)x 100mm(W) x 18mm(H). Please make sure that the size of the heat sink fits that of your component
A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device’s temperature at optimal levels. In computers, heat sinks are used to cool central processing units or graphics processors. Heat sinks are used with high-power semiconductor devices, where the heat dissipation ability of the component itself is insufficient to moderate its temperature.
Specifications:
100% Brand New High Quality
Material: Aluminum
Fins: 16
Size: 4.7″(L) x 3.93″(W) x 0.7″(H) /120mm (L)x 100mm(W) x 18mm(H)
Quantity: 2 Pieces
Used for : Various mini DC converter circuit board computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
Package:
2 x Aluminum Heat Sink Cooling Fin
Note:
1. Please check the specification table and make sure that the size of the heatsink fits that of your component. Thank You!
2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
Similar items with 4 stars and above
Gadgeter 10pcs Aluminum Heatsink Cooler Circuit Board Cooling Fin for Raspberry Pi,VGA RAM,IC Chips,Mosfet SCR,South Bridge,North Bridge, with 3M 8810 Thermally Conductive Heat Transfer Tape
- 10 pcs of aluminum heat sinks with 3M 8810 Thermally Conductive Heat Transfer Tape.
- Overall Size : 22 x 22x 10mm/ 0.87″ x 0.87″ x 0.4″ (L*W*H)
- Weight : 20g
- Compatible with Raspberry Pi 2, Raspberry Pi B/B+ , Raspberry Pi A/A+ , South Bridge , North Bridge , VGA RAM , MOSFET , DC Boost Power Converter , Power Converter etc……..
Specification :
Package Include :
10x Aluminum Heat Sinks
10x 3M Thermally Conductive Heat Transfer Tape (All Pad Are Not Pre Assembled .Assembly Required)
1 x Gift Cable Ties(charging cable does no include) every unit will receive one extra bonus if you don’t received please contact us we will send you the gift.
If for any reason you are unhappy with any product by GADGETER, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
CNBTR 62 x 62mm White Thermoelectric Peltier Semiconductor Coolers Model TEC1-12730 Set of 5
Specification:
Brand name: CNBTR
MODEL: TEC1-12730(TE is the abbreviation of Thermo-Electric)
Maxiumu power consumption :456 Watts
Output cooling power: 253W
Operates from 0-15.2 volts DC and 0-30 amps
Operates at -60 °C to +180 °C ambient temperature
Size: 62mm x 62mm x 4.8mm
Weight:325g
Features:
1.It is made of ceramics.
2.It is solid state, without vibration and noise.
3.It has perimeter sealer for moisture protection.
4.The maxiumu power consumption is 456 Watts.
Package include:
5 x TEC1-12730 Thermoelectric Peltier Cooler
The unique MPN label on each inner package, which confirm it passed the quality inspection and it is genuine item sold from our shop. Please offer it to us when you need assistance.
12mm Aluminum Cooling Heat Sink Holder Mount for 12mm Laser Diode Modules 32x62mm
Nxtop 5 PCS Aluminium Heatsink Heat Sink Module Cooler Fin 100x25x10mm Silver Tone
- 100x25x10mm silver tone aluminum heatsink heat sink cooling fin, ideal to be used for cooling LED, Power IC, Power Amplifier,and Transistors etc.
- Size: 100 x 25 x 10mm/3.94 x 0.98 x 0.39inch(L x W x H).
- Material: Aluminium
- Color: Silver Tone
- Fins Number: 8.
- Base Board Thickness: 4.2mm
- Pin Board Thickness: 1.5mm(1.8mm for two pin boards outside).
- Package Content: 5 x Silver Tone Aluminium Heatsink Cooling Fin.
Specification: Product Name: Cooling Fin Material: Aluminium Size: 100 x 25 x 10mm/3.94 x 0.98 x 0.39inch(L x W x H) Weight: 88g/3.1oz Quantity: 5 pcs Color: Silver Tone Fins Number: 8 NOTE: Please check the specification and make sure that the size of the heatsink fits your component. Package Content: 5 * Aluminium Heatsink(Glue not included)
Windwinevine Gray 62G Thermal Compound Paste Cools Tube Electronics Heatsink Cooling Grease preventing Overheating & Extending The Life
Feature:
100% brand new and high quality.
Help prevent overheating & extend the life of your computer CPU or game console.
Inexpensive solution to keep your computer and other electronics systems cool
Not electrically conductive
2 gram syringe
Conclusion
By our suggestions above, we hope that you can found cooling heat sink 62 for you.Please don’t forget to share your experience by comment in this post. Thank you!
