yesallevent 
Nowadays, there are so many products of cooling controller temperature in the market and you are wondering to choose a best one. You have searched for cooling controller temperature in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling controller temperature which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit
- ????????There are two relays. Switch between cooling and heating modes. Support for °F / °C display.
- ????????Overheat Protection of Home Appliances, hatching, Seedling pads, constant temperature Circulation and other Electrical Appliances.
- ????????By setting the temperature set-point and the difference between the temperature set-point and the difference.
- ????????Alarm when temperature is out of limit or sensor is wrong.
- ????????Switch between refrigeration and heating modes, temperature calibration.
DZS Elec Temperature Controller -50 to 110 Celsius (-58 to 230 F) DC 12V Programmable Heating/Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor
- Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time. Can be used for cooling/heating control. Operating Voltage: DC12V 200mA
- Measurement Range: -50 to 110 Celsius (-58 to 230 F), the C/F button allows you to switch between Celsius and Fahrenheit temperatures
- Clear Working State: the relay is closed when the light is on, and the relay is disconnected when the light is off. It has high temperature protection.
- With a waterproof NTC (10K 0.5%) temperature sensor probe, rogrammable heating/cooling mode, delay start, high temperature alarm, Celsius/Fahrenheit mode, etc.
- Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.
Product Description:
Product Name: Programmable Dual LED Display Temperature Controller
Operating Voltage: DC12V 200mA
Measurement Range: -50 to 110 Celsius (-58 to 230 F)
Elaboration Precision: +/-0.1 Celsius
Control Precision: 0.1 Celsius
Backlash Precision: 0.1 Celsius
Refresh Rate: 0.5s
High Temperature Protection: 0 to 60 Celsius (32 to 230 F)
Temperature Sensor Type: 10K 0.5% NTC
Operating Temperature: -10 to 60 Celsius (14 to 140 F)
Compatible Load: 5A / 15A 220VAC; 20A 14VDC
Power Consumption: Less than and equal to 35mA (Static), Less than and equal to 65mA (relay closure)
Module Size: 48x29x32mm / 1.89×1.14×1.26 inch (LxWxH)
Temperature Setting:
Press STC key and the LED will flash. Press STC (+) and C/F (-) key to reach the set temperature value, wait for 3s, and the module will automatically save the parameters and exit.
Indicator:
Lights on, relay closed; Lights out, relay disconnected.
LED Display:
Red: Measuring Temperature; Blue: Setting Temperature
LL: Means the sensor is open
HH: Indicates that the temperature exceeds the measurement range of the module
–: Indicates that the module is under high temperature protection
Programmable Thermostat Introductions (Code, Explain, Setting range, Factory setting):
P0, Heating/Cooling, H/C, C
P1, Return difference, 0.1-30, 2
P2, Set limit maximum, +110, 110
P3, Set limit minimun, -50, -50
P4, Temperature correction, -15 – +15, 0
P5, Delay start, 0-10, 0
P6, High temperature alarm, -50 – +110, OFF
P7, Celsius/Fahrenheit, CS/FH, CS
P8, Factory reset, ON-OFF, OFF
Package Content:
1pc Temperature monitoring controller
1pc operating manual
DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
Heating Thermostat Aquarium Probe Sensor Inkbird ITC-306T Heater Temperature Controller Pre-Wired Dual Stage Timer Time Switch ONLY HEAT Outlet AC 100~240V 1200W NO Cooling
- ONLY heating outlet aquarium sensor heater for aquarium, reptile.
- It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the needs of aquarium.
- This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control.
- The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
- ℃ / ℉ Display can be chosen. Temperature calibration
- Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
Features:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Temperature Control Mode: On/Off Control, Heating, No cooling control
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Sensor Type: aquarium sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature:-20~ 60 ° C / -4~ 140 ° F
Humidity:20~85% (No Condensate)
Dimension:
Body:140x68x33mm (5.5×2.7×1.3 inch.)
Socket:85x42x24mm (3.3×1.7×1 inch.)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
NET Weight: About 0.35kg (0.77lb)
Temperature calibration
Over-temperature and sensor fault alarm
Warranty: 1 Year
Package Content:
1x Temperature controller ITC-306T with Aquarium Probe
1x Manual
Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
Inkbird Digital Temperature Controller Thermostat & Timer Time Switch AC 100~240V,1200W Only Heating for Breeding, Planting ect. NO COOLING CONTROL
- NO COOLING CONTROL.There is only heating relay. It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc. Only one relay and it extends two plugs which both are heating plugs, NO cooling plug.
- It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
- This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control. With large power output 1,200W, it’s suitable for most applications.
- The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
- There is only heating relay. It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
Conclusion
By our suggestions above, we hope that you can found cooling controller temperature for you.Please don’t forget to share your experience by comment in this post. Thank you!
