Top 10 Boat Lift Motors Ao Smith

Direct replacement for all Lunmar boat lifts using a gearbox that has a double belt. 1 1/2 HP AO Smith Motor Only-TENV 56 frame 120/240 volt 50/60 hz Direct Replacment for AMS 8500

1HP AO Smith Motor – TENV with: Switch, 125V GFCI, & Wire Direct replacement for AMS 4000.

1 1/2HP AO Smith Motor – TENV with: Switch, 125 GFCI, & Wire Direct Replacement for AMS 8500 boat hoist and Lunmar 15000 aluminum piling mount boat lifts. Upgrades the 6500 Ams hefty hoist to 8500 capacity . 125/250 volt, 50/60 hz, 16 amp, totally enclosed non vented

The Elite 1 HP Stainless Steel C-Face Boat Lift Motor features stainless steel housing with aluminum end-bells, double shielded ball bearings, and dynamically balanced rotors. IP-55 NEMA enclosure rated and UL listed. Totally enclosed, non-venting (TENV) enclosure. Single phase, dual voltage motor with C-Face mounting for direct input units. Motor fits BH-USA A-Drives, Golden Sea-Drives, AMS E-Drives, and all other direct shaft input mounts. Easy to wire directions come standard in the box. Does not work on flat plate belt driven hoists.

Motor features colored T-Wires and each comes with a cross-reference wire chart for all Leeson Electra-Gear motors. Wired motors include the 2″ drive pulley. Stock wired motor is 16′ cable. Longer cable options are avaiable but take 3-5 days to ship. All motors wired to 220/230 volts from the factory. Motor only option does not include 2″ motor pulley, wiring harness, or switch and can be rewired to 110 volts to fit your existing switch. BH-USA recommends using a licensed electrician to wire or rewire any electrical component.

Dimensions: 9″ x 10 1/2″ x 6 1/4″
Max Run Time: 15 Minutes
Horsepower: 1 HP
Mounting Type: C-Face
RPM: 1725
Service Factor: 1.15
Voltage: 220v
Phase: 1
Amps: 7.8
Herz: 60
HSG: TENV
Code: L
Insulation: A
Shaft Diameter: 5/8″

The Elite 1 HP Heavy Duty 56 Frame Boat Lift Motor features a totally enclosed, non-venting (TENV) enclosure, NEMA enclosure rated, and UL listed. Single phase, dual voltage motor with 56 frame mounting for belt driven flat plate hoists. Compatible with BH-USA, ACE, Hefty Hoist, AMS and American Power Hoist belt driven flat-plate hoists. Easy to wire directions come standard in the box. Does not work on direct drive mount hoists. Wired motors include the 2″ drive pulley. Stock wired motor is 16′ cable. Longer cable options are available but take 3-5 days to ship. All motors wired to 220/230 volts from the factory. Motor only option does not include 2″ motor pulley, wiring harness, or switch and can be rewired to 110 volts to fit your existing switch. BH-USA recommends using a licensed electrician to wire or rewire any electrical component. Ax Running Time: 15 Minutes Mounting Type: C / Voltage: 115/230RPM: 1725 / Service Factor: 1.25Amps: 7.8 / Hers: 60 / AMB: 40cFrame: 56 / HSG: TENV / Code: L / Insulation: A Drive Shaft Diameter 5/8″

The Elite 3/4 HP Stainless Steel C-Face Boat Lift Motor features stainless steel housing with aluminum end-bells, double shielded ball bearings, and dynamically balanced rotors. IP-55 NEMA enclosure rated and UL listed. Totally enclosed, non-venting (TENV) enclosure. Single phase, dual voltage motor with C-Face mounting for direct input units. Motor fits BH-USA A-Drives, Golden Sea-Drives, AMS E-Drives, and all other direct shaft input mounts. Easy to wire directions come standard in the box. Does not work on flat plate belt driven hoists. Motor features colored T-Wires and each comes with a cross-reference wire chart for all Leeson Electra-Gear motors. Wired motors include the 2″ drive pulley. Stock wired motor is 16′ cable. Longer cable options are available but take 3-5 days to ship. All motors wired to 220/230 volts from the factory. Motor only option does not include 2″ motor pulley, wiring harness, or switch and can be rewired to 110 volts to fit your existing switch. BH-USA recommends using a licensed electrician to wire or rewire any electrical component. Ax. Run Time: 15 : 1725 / Service Factor: 1.15Voltage: 115/230 / Phase: 1 / Amps: 5.5SFtartA: 6.2 / Hers: 60 / AMB: 40cFrame: 56 (110) / C (220) / HSG: TENV Code: L / Insulation: A Drive Shaft Diameter: 5/8″

The Elite 1 1/2 HP Stainless Steel C-Face Boat Lift Motor features stainless steel housing with aluminum end-bells, double shielded ball bearings, and dynamically balanced rotors. IP-55 NEMA enclosure rated and UL listed. Totally enclosed, non-venting (TENV) enclosure. Single phase, dual voltage motor with C-Face mounting for direct input units. Motor fits BH-USA A-Drives, Golden Sea-Drives, AMS E-Drives, and all other direct shaft input mounts. Easy to wire directions come standard in the box. Does not work on flat plate belt driven hoists. Motor features colored T-Wires and each comes with a cross-reference wire chart for all Leeson Electra-Gear motors. Wired motors include the 2″ drive pulley. Stock wired motor is 16′ cable. Longer cable options are available but take 3-5 days to ship. All motors wired to 220/230 volts from the factory. Motor only option does not include 2″ motor pulley, wiring harness, or switch and can be rewired to 110 volts to fit your existing switch. BH-USA recommends using a licensed electrician to wire or rewire any electrical component. Ax. Run Time: 15 Minutes Mounting Type: C / RPM: 1725Service Factor: 1 / Amps: 8.5Herz: 60 / AMB: 40c / Frame: 56C / HSG: TENV Code: L / Insulation: A Drive Shaft Diameter: 5/8″

The Elite 3/4 HP Painted 56 Frame Boat Lift Motor features a totally enclosed, non-venting (TENV) enclosure, NEMA enclosure rated, and UL listed. Single phase, dual voltage motor with 56 frame mounting for belt driven flat plate hoists. Compatible with BH-USA, ACE, Hefty Hoist, AMS and American Power Hoist belt driven flat-plate hoists. Easy to wire directions come standard in the box. Does not work on direct drive mount hoists. Wired motors include the 2″ drive pulley. Stock wired motor is 16′ cable. Longer cable options are available but take 3-5 days to ship. All motors wired to 220/230 volts from the factory. Motor only option does not include 2″ motor pulley, wiring harness, or switch and can be rewired to 110 volts to fit your existing switch. BH-USA recommends using a licensed electrician to wire or rewire any electrical component. Ax. Run Time: 15 : 1725 / Service Factor: 1.0Voltage: 115/230 / Phase: 1Amps: 10.8/5.4 / Herz: 60 / AMB: 40Frame: 56 / HSG: TENV / Code: L / Insulation: B Drive Shaft Diameter: 5/8″

The Elite 1 HP Heavy Duty 56 Frame Boat Lift Motor features a totally enclosed, non-venting (TENV) enclosure, NEMA enclosure rated, and UL listed. Single phase, dual voltage motor with 56 frame mounting for belt driven flat plate hoists. Compatible with BH-USA, ACE, Hefty Hoist, AMS and American Power Hoist belt driven flat-plate hoists. Easy to wire directions come standard in the box. Does not work on direct drive mount hoists. Wired motors include the 2″ drive pulley. Stock wired motor is 16′ cable. Longer cable options are available but take 3-5 days to ship. All motors wired to 220/230 volts from the factory. Motor only option does not include 2″ motor pulley, wiring harness, or switch and can be rewired to 110 volts to fit your existing switch. BH-USA recommends using a licensed electrician to wire or rewire any electrical component. Ax. Run Time: 15 Minutes Mounting Type: C / RPM: 1725Service Factor: 1.25 / Voltage: 115/230Phase: 1 / Amps: 7.8 / Hers: 60 / AMB: 40cFrame: 56 / HSG: TENV / Code: L / Insulation: A Drive Shaft Diameter: 5/8″

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Boat Lift Motors Ao Smith, eg:

• What are Top 10 Boat Lift Motors Ao Smith for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Boat Lift Motors Ao Smith to buy?
• What are Top Rated Boat Lift Motors Ao Smith to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Boat Lift Motors Ao Smith?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Boat Lift Motors Ao Smith.
• Before deciding to buy any Boat Lift Motors Ao Smith, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Boat Lift Motors Ao Smith and What you should consider when buying the Boat Lift Motors Ao Smith and Where to Buy or Purchase the Boat Lift Motors Ao Smith. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Boat Lift Motors Ao Smith of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Boat Lift Motors Ao Smith.