The Best Ao Smith Promax Hydropneumatic Tank

“Features:

Stainless steel 1/4″” NPT valve thread connection to connect to RO systems and other water producing applications. Smooth internal air vent cap prevents diaphragm damages. High-grade butyl diaphragm and post-cure procedures ensure a safe, tasteless and odorless water chamber. Discharges effectively in a vertical or horizontal position. Tested by independent third-party to meet NSF/ANSI Standard. IAMPO approved. CE Mark approved

Specifications & Dimensions:

Height: 14″”
Diameter: 11″”
Tank size: 3.2 gallons
Shipping weight: 9 LBS

Tank ball valve included.”

Product Description

At air valve, check tank air pressure with tire gauge. If needed, adjust tank pressure up or down

BODY CONSTRUCTION: Heavy Gauge Steel
BODY FINISH: Electrostatically Applied Baked-On Polyester
TANK PRECHARGE: 40 psi Nitrogen-Rich Charge
TANK CAPACITY: 35 gal
EQUIVALENCY RATING: 82 gal
DRAWEOWN WITH 20/40 SWITCH: 12.7 gal
DRAWDOWN WITH 30/50 SWITCH: 10.7 gal
DRAWDOWN WITH 40/60 SWITCH: 9.3 gal
BLADDER / WATER CELL: One Piece Seamless PVC
TANK DIAMETER: 20″
TANK HEIGHT: 36-1/4″
FLANGE: Glass-Filled Polypropylene
PIPE TAP SIZE: 1″ NPT
DISTANCE FLOOR TO TAP CENTER: 2″
MAXIMUM PRESSURE RATING: 100 PSI

From the Manufacturer

Vertical Pre-Charged pressure tank. This tank holds 35-Gallons but is equal to an 82-Gallon standard tank in performance.

Product Description

Uniweld RHP400 is a durable brass piston designed diaphragm Nitrogen Regulator with a Delivery Pressure 0-400 PSI for purging and pressure testing air conditioning and refrigeration systems. Regulator with CGA580 inlet connection, 1/4 inch male flare outlet connection, self re-seating relief valve (not designed to protect downstream system) and easy to read 2 inch Contents Gauge 0-4000 PSI (Part No. G7SD) and Delivery Gauge 0-600 PSI (Part No. G8SD) with protective rubber gauge boots (Part No. GB20S). For smooth accurate delivery pressure adjustment there is a large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Regulator can be used with CO2 with the Uniweld part no. F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).

From the Manufacturer

Uniweld RHP400 is a durable brass piston designed diaphragm Nitrogen Regulator with a Delivery Pressure 0-400 PSI for purging and pressure testing air conditioning and refrigeration systems. Regulator with CGA580 inlet connection, 1/4 inch male flare outlet connection, self re-seating relief valve (not designed to protect downstream system) and easy to read 2 inch Contents Gauge 0-4000 PSI (Part No. G7SD) and Delivery Gauge 0-600 PSI (Part No. G8SD) with protective rubber gauge boots (Part No. GB20S). For smooth accurate delivery pressure adjustment there is a large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling. Regulator can be used with CO2 with the Uniweld part no. F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).

Tank Max – water heater protects your family from scalding by allowing water to be 140 degrees (F) in the water heater while distributing 120 degree (F) water to fixtures. Lead-free and easy to install, tank Max saves money by extending the life of the hot water in your water heater. No solder or glue needed. Installation requires only a wrench and pipe thread sealing tape. Product specifications PDF below.

RO-122-W14 Hydronix 3.2 Gallon Stainless Steel Reverse Osmosis Storage Water Tank is built with FDA approved materials. The tank ensures that your water is tasteless, odorless and contaminant free. The cap has a brass air valve and o-ring sealed to ensure a leak-free chamber. Perfect for compact Reverse Osmosis units, RVs, Campers, or any other area where space is limited. This tanks is Pre-pressurized, Pre-charged and ready to use.

2. 1 us gal (8L) in-line captive air pressure tank. Designed for water systems assembled with a jet pump. Tough epoxy-baked finish for durability. Replaceable bladder made of synthetic butyl rubber to increase reliability and life span. No water to metal contact for rust-free operation. Stainless steel flange with 1 inch NPT connection. 100 psi maximum working pressure. For use with a 20/40 psi pressure switch, the air pressure must be adjusted to 18 psi; for a 30/50 psi switch, the pressure must be adjusted to 28 psi. Drawdown 0. 7 us gal (20/40 psi); 0. 6 us gal (30/50 psi).

Product Description

Water worker well tank, vertical pre-charged, series: HT-2B, 20 gal capacity, 8 in diameter, 13 in height, 3/4 in connection, MNPT connection, steel, 100 psi, 200 deg F, nsf approved. Designed as a direct-fit replacement for the majority of installed well tank bases. 2 gallon capacity, in line pressure tank, recharged well system, heavy duty steel shell with high gloss enamel finish, bacteria resistant butyl rubber diaphragm with seamless construction for uniform strength, polypropylene liner and copper lined acceptance fitting provide a corrosion resistant water reservoir and a reliable water tight seal, meets FDA requirements for potable water Supply.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.

Constructed of heavy-gauge steel with tough, appliance-like finish. Replaceable air/water separator prevents corrosion and bacterial growth – in compliance with FDA regulations. Tank is factory precharged to 40 PSI. Includes pump mounting bracket.

Pre-charged tanks are rated to compare with equivalent-size conventional (standard) tanks in terms of water draw down between pump cycles. The actual physical size of a pre-charged tank is much less and allows space savings up to 50% when comparing drawdown and size to that of a conventional tank. Economy is achieved with the smaller size of pre-charged tanks compared to similar water delivery and size of conventional tanks. This tank has a rated size of 42 gallons; the actual tank capacity is 19 gallons. U.S.A. Material: Steel, Max. Capacity (gal.): 42, Includes: Pump mounting bracket, Max. PSI: 40, Discharge Port (in.): 1, Dimensions D x H (in.): 28 x 18

High-quality 20 cu ft steel oxygen cylinder. Heavy-duty construction with thick walls and durable painted finish. Tank has great low-temperature delivery. Guaranteed date of manufacture or hydro test within 180 days. UN/ISO Stamped.TC/DOT Approved

Product Description

Water worker well tank, horizontal pre-charged, series: ht-20hb, 20 gal capacity, 29 in diameter, 16 in height, 1 in connection, MNPT connection, steel, 100 psi, 200 deg F, nsf approved, 42 gal equivalency, for residential. Polypropylene-lined steel supports water weight to ensure water never sits in loose-fitting vinyl or rubber bags that can fold, crease and wear. Liner does not require scheduled replacements for long-lasting use formed liner fits the steel shell for added durability nsf certified. This pre-charged water tank is designed to maintain its air charge for years for easy upkeep. The tank uses a thick diaphragm to keep water separate from pre-charged air and to help reduce air loss. The tank’s steel shell with deep-drawn construction helps support water weight, while its polypropylene line helps prevent air and odors from being absorbed into the water.Pre-charged tanks are rated to compare with equivalent-size conventional (standard) tanks in terms of water drawdown between pump cycles. The ACTUAL physical size of a pre-charged tank is much less and allows space savings up to 50% when comparing drawdown and size to that of a conventional tank. Economy is achieved with the smaller size of pre-charged tanks compared to similar water delivery and size of conventional tanks. This tank has a rated size of 42 gallons; the ACTUAL tank capacity is 20 gallons. Max. Psi: 100, dimensions D x h (in.): 30 x 15, discharge port (in.): 1, Max. Capacity (gal.): 20, includes: tank, material: steel, polypropylene.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Ao Smith Promax Hydropneumatic Tank, eg:

• What are Top 10 Ao Smith Promax Hydropneumatic Tank for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Ao Smith Promax Hydropneumatic Tank to buy?
• What are Top Rated Ao Smith Promax Hydropneumatic Tank to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ao Smith Promax Hydropneumatic Tank?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ao Smith Promax Hydropneumatic Tank.
• Before deciding to buy any Ao Smith Promax Hydropneumatic Tank, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Ao Smith Promax Hydropneumatic Tank and What you should consider when buying the Ao Smith Promax Hydropneumatic Tank and Where to Buy or Purchase the Ao Smith Promax Hydropneumatic Tank. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Ao Smith Promax Hydropneumatic Tank of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ao Smith Promax Hydropneumatic Tank.