The Best Ao Smith Pmc5 Expansion Tank

Deal Score0
Deal Score0

We spent many hours on research to finding ao smith pmc-5 expansion tank, reading product features, product specifications for this guide. For those of you who wish to the best ao smith pmc-5 expansion tank, you should not miss this article. ao smith pmc-5 expansion tank coming in a variety of types but also different price range. The following is the top 10 ao smith pmc-5 expansion tank by our suggestions

550 reviews analysed
Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score
Rank
Product Name
Score

WATTS WATER TECHNOLOGIES GIDDS-1030401 Potable Water Expansion Tank, Model #Plt-5, Stainless Steel Nipple, 2.1 Gallon, Lead Free

Last update was on: Tuesday, May 26, 2020

WATTS WATER TECHNOLOGIES GIDDS-1030401 Potable Water Expansion Tank, Model #Plt-5, Stainless Steel Nipple, 2.1 Gallon, Lead Free

Amtrol T-5 THERM-X-SPAN Expansion Tank

Last update was on: Tuesday, May 26, 2020

The AMTROL therm-x-span T-5 expansion tank has a steel shell, plastic liner and rubber diaphragm with a brass system connection. The maximum operating temperature is 200F and the maximum working pressure is 150 psig.

AMTROL ST-5 Thermal Expansion Tank

Last update was on: Tuesday, May 26, 2020

Product Description

AMTROL ST-5 Thermal Expansion Tank

From the Manufacturer

Amtrol invented the thermal expansion tank to control pressure build-up in closed, hot water systems. This prevents the water heater pressure relief valve from opening, saves energy and eliminates a potential safety hazard. All Therm-X-Trol expansion tank

Flextrol FTH30 Hydronic Expansion Tank 2.1 Gallons for Closed Hot Water Heating Systems, 1/2 Inch MIP Connection, Gray

Last update was on: Tuesday, May 26, 2020

Size:2.1 Gallons |  Color:Gray

What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.

Technical Features

  • Certified synthetic SBR rubber diaphragm
  • MIG welding eliminates interior rough spots and sharp edges
  • Each tank is factory leak tested to ensure tank integrity
  • All diaphragms designed to maximize drawdown
  • External baked epoxy-polyester coating provides a durable appliance finish
  • Welded side outlet allows easy and quick installation
  • Protected pre charge valve eliminates potential leak path
  • Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle

Additional Description

  • Shell: Carbon Steel
  • Connection: Carbon Steel
  • Diaphragm: SBR Synthetic Rubber
  • Color: Gray

Operating Conditions

  • Max. Operating Pressure: 75 PSI
  • Operating Temperature: 210 Degrees Fahrenheit
  • Factory Precharge: 12 PSI
  • Warranty: 1 Year

Specifications

  • Model Number: FTH15
  • Tank Size: 2.1 Gallons
  • Tank Weight: 4.6 Pounds
  • Connection Size (National Pipe Thread): 1/2" Male Iron Pipe (MIP)
  • Dimensions (LxWxH): 9" x 9" x 13"
  • Acceptance Volume: 1.4 Gallons
  • UPC Code: 80459513060

Eastman 60022 Thermal Expansion Tank, 2 Gallon, White

Last update was on: Tuesday, May 26, 2020

Size:2 Gallon

The Eastman 60022 2-Gallon Thermal Expansion Tank provides a secure connection to water heaters that prevents dangerous build-ups of pressure. This water heater expansion tank stops hot water from backflowing into the cold water line and it also prevents hot water from escaping through the pressure relief valve and onto the floor. Constant fluctuations in water pressure can be dangerous and they can damage the water heater, properly installing a thermal expansion tank can solve all these issues.

The thermal expansion tank has a high-quality butyl rubber diaphragm and 304 stainless steel fittings for long-lasting performance. This product comes factory pre-charged at 40 psi. It complies with Lead-Free Law.

Amtrol ST-12 Thermal Expansion Tank

Last update was on: Tuesday, May 26, 2020

Amtrol ST-12 THERM-X-TROL Expansion Tank, 4.4 Gallon (141N43) What Is Thermal Expansion? With modern plumbing codes mandating backflow prevention, thermal expansion can cause pressure buildup in domestic water systems. When demand is put upon a potable water system, hot water is drawn from the water heater. Cold water from the supply line enters the water heater to replenish it. The colder water is heated to replace the hot water used. With the installation of a backflow preventer, check valve or pressure reducing valve on the supply line, the water heater and the system piping form a closed plumbing system under pressure. As the water is heated, thermal expansion occurs. Pressure increases until the relief valve opens and the expanded water “spills” from the water heater. This “spillage” results in wasted BTU’s and a potential safety hazard for the homeowner. Closed Potable Hot Water system without THERM-X-TROL Backflow preventer, pressure reducing valve or meter causes expanded (heated) water to build pressure causing the relief valve to open resulting in: Wasted BTU’s Shortened water heater life Wasted municipal water and sewer dollars Potential safety hazard for homeowner The Amtrol THERM-X-TROL ST-12 Expansion Tank is designed to eliminate this problem by providing control of maximum pressures at a level below the relief valve setting. It also provides an additional space in the system to accommodate the increased volume of water created by thermal expansion, returning it to the system when hot water delivery is demanded.

Watts DET-5 2.1 G Potable Water Expansion Tank for 50-Gallon Water Heaters

Last update was on: Tuesday, May 26, 2020

Flextrol FTT5 Thermal Expansion Tanks-for Hot Water Heaters, Carbon Shell, Stainless Steel 3/4 Inch MIP Connection, Butyl Diaphragm, 150 PSI, 210 Degrees Fahrenheit, Almond Color, 2.1 Gallons

Last update was on: Tuesday, May 26, 2020

Size:2.1 Gallons |  Color:Almond

What is Thermal Expansion?
When heated, water expands. Under normal circumstances, a 40 Gallons hot water heater creates roughly an additional half gallon of water when heated (with no demand). In the past this expanded water would flow back into the public water supply. However, in many countries, where applicable by code, a backflow preventer is required, creating a closed system and a new problem as this extra half gallon of water is not compressible. When an expansion tank is installed the excess water enters the pre-pressurized tank. As the temperature and pressure reaches its maximum, the diaphragm flexes against an air cushion (air is compressible) to allow for increased water expansion. When the system is opened again or the water cools, the water leaves the tank and returns to the system.

Potential Problems Without an Expansion Tank

  • Premature failure of the water heater may void the warranty of the water heater
  • Dangerous high pressure
  • leaky fittings and valves
  • collapsed center flues
  • flames out of combustion chamber
  • Unnecessary Relief Valve Discharge

Installation Options for Thermal Expansion Tanks

  • Install on the cold water side after the pressure reducing valve and between the backflow preventer and the water heater
  • Do not install in an area where leakage could cause property damage
  • The tank can be installed either vertically or horizontally. However, if the tank is to be installed horizontally, then it must be fully supported independent from the piping. Failure to do so will void the warranty.

Technical Features

  • All tanks are NSF61 Certified
  • MIG welding eliminates interior rough spots and sharp edges
  • Each tank is factory leak tested
  • 150 PSI Max pressure rating
  • External baked epoxy-polyester coating provides a durable appliance finish
  • Exclusive polypropylene liner eliminates internal corrosion
  • Protected precharge valve eliminates potential leak path

Material Description

  • Shell: Carbon Steel
  • Connection: Stainless steel
  • Diaphragm: Butyl
  • Color: Almond

Operating Conditions

  • Max. Operating Pressure: 150 PSI
  • Operating Temperature: 210 Degrees Fahrenheit
  • Factory Precharge: 40 PSI
  • Warranty: 1 Year

Specifications

  • Model Number: FTT5
  • Tank Size: 2.1 Gallons
  • Tank Weight: 6 Pounds
  • Connection Size (National Pipe Thread): 3/4" Male Iron Pipe (MIP)
  • Dimensions (LxWxH): 13" x 9" x 9"
  • Acceptance Volume: 1.4 Gallons
  • UPC Code: 80459513077

Amtrol WX-302 Well Pressure Tank

Last update was on: Tuesday, May 26, 2020

The well-x-trolley WX-302 Pressure tank floor stand model is specifically designed for larger homes and institutions such as country clubs farms nursing homes etc. This handles The demands of larger systems in a minimum of space. Exclusive butyl diaphragm along with the 100% corrosion resistant virgin polypropylene liner are secured by a positive hoop ring seal for added strength and reliability. This totally integrated system outperforms other types of water chamber designs. The stainless steel air valve is welded rather than threaded to prevent loss of air pressure. The finest quality custom Mill steel is used in the deep drawn dome for extra strength while keeping tank weight to a minimum. Note: all tanks are pre-pressurized at 38 PSI and should always be set 2 PSI below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 psi differential between cut in and cut out. Installation operation and maintenance for well-x-trolley tanks PDF 1Mb

Amtrol WX-202 Well Pressure Tank

Last update was on: Tuesday, May 26, 2020

Conclusion

By our suggestions above, we hope that you can found Ao Smith Pmc5 Expansion Tank for you.Please don’t forget to share your experience by comment in this post. Thank you!

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Ao Smith Pmc5 Expansion Tank, eg:

  • What are Top 10 Ao Smith Pmc5 Expansion Tank for 2020, for 2019, for 2018 or even 2017 (old models)?
  • What is Top 10 Ao Smith Pmc5 Expansion Tank to buy?
  • What are Top Rated Ao Smith Pmc5 Expansion Tank to buy on the market?
  • or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ao Smith Pmc5 Expansion Tank?…
  • All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ao Smith Pmc5 Expansion Tank.
  • Before deciding to buy any Ao Smith Pmc5 Expansion Tank, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
  • You will know how you should choose Ao Smith Pmc5 Expansion Tank and What you should consider when buying the Ao Smith Pmc5 Expansion Tank and Where to Buy or Purchase the Ao Smith Pmc5 Expansion Tank. Just consider our rankings above as a suggestion. The final choice is yours.
  • That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
  • You could see the top 10 Ao Smith Pmc5 Expansion Tank of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
  • You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ao Smith Pmc5 Expansion Tank.