Top 10 Ao Smith Or Rheem Water Heater
Nowadays, there are so many products of ao smith or rheem water heater in the market and you are wondering to choose a best one.You have searched for ao smith or rheem water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith or rheem water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
506 reviews analysed
Rinnai RL Series HE+ Tankless Hot Water Heater: Indoor Installation
Last update was on: Tuesday, May 26, 2020
- Endless hot water for your entire home
- RL75iN HE+ High Efficiency Tankless Hot Water Heater – Natural Gas: Indoor Installation Only
- Up to 7.5 GPM hot water flow rate (varies by groundwater temp)
- Circ-Logic technology allows you to set recirculation patterns that coincide with your typical habits. Hot water is available when you need it!
- Residential Factory Warranty – 120 months (heat exchanger), 12 months (labor), 60 months (parts)
Color:RL75iN – Natural Gas/7.5 GPM
Product Description
non-Condensing Tankless Water Heater
From the Manufacturer
Stop planning your mornings and evenings around your water heater. Set your own schedule, thanks to the R75LSi. Ideal for two- to three-bathroom homes, the R75LSi delivers up to 7.5 gallons of hot water per minute (GPM), while saving energy and money. Mount your compact R75LSi in virtually any room, and vent directly to the outside with a single wall or roof penetration.
Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute
Last update was on: Tuesday, May 26, 2020
- Endless hot water, On-demand usage, Compact, Space saving, Energy conservation
- Computerized safety features, No pilot light to have to worry about
- Satisfies the 2012 SCAQMD Rule 1146.2 for Ultra-Low NOx Emissions
Product Description
With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.
From the Manufacturer
With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.
About Fluid Aluminum/Zinc Flexible Anode Rod Kit For Water Heaters | Includes Full Roll Of Teflon Tape | Easy-To-Follow Step-By-Step Instructions | (WITHOUT Cap) (WITHOUT Socket)
Last update was on: Tuesday, May 26, 2020
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/ Zinc Alloy, instead of magnesium. This unique alloy works everyday, killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- FITS: Almost all water heaters including: Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape will leave you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw or similar tool.
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Style:WITHOUT Socket
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. WIN THE WAR ON SMELLY WATER!
Never have to explain that smell again!
2. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
3. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS.Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you!
4. NO LEAKS! We include a full-roll of Teflon Tape to ensure you will not have leaks and will have, plenty left-over for next time.
5. ONE SIZE FITS MOST. Most water heaters including: Rheem, Reliance, Richmond, Kenmore, State and GE, AO Smith and many more that use this “HEX TYPE” (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
6. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
7. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location with about a foot of overhead clearance.
8. RUGGED CONSTRUCTION. Anode Rod Segments are connected with 100 percent, 316 Stainless Steel Aircraft Cable and connectors that will never rust, corrode or break.
A.O. Smith by Honeywell Gas Control Valve 100262939 2" Cavity Natural Thermostat Compatible with A.O. Smith, State, American, Whirlpool, and Craftmaster Brand Water Heaters
Last update was on: Tuesday, May 26, 2020
- Please feel free to contact us directly to determine if this is the correct gas valve for your water heater – we need heater’s model and serial number to cross reference
- Honeywell gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, American, Whirlpool and Craftmaster branded heaters
- Temperature control assembly 100262939 supplies the burner with gas to heat the water
- Temperature ratings: ambient– 0 c to 60 c
- tco limit– 87 c
- A service technician is recommended for the repair to ensure the gas supply line is leak free
Please feel free to contact us directly to determine if this is the correct gas valve for your water heater!!! We will need the model and serial number of the water heater to cross reference properly. The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, Whirlpool, Craftmaster and Reliance. Product manufactured by Honeywell for A.O. Smith. Honeywell model # WV8840B1158
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Last update was on: Tuesday, May 26, 2020
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Size:7-Gallon
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
Kenmore 9003382005 Water Heater Burner Assembly Genuine Original Equipment Manufacturer (OEM) Part
Last update was on: Tuesday, May 26, 2020
- This part is compatible with models including
- XCV50,GCV50,FCV50
- This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
- 183222,183222-000
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Ao Smith
- This burner assembly (part number 9003382005) is for water heaters
- The assembly may include multiple parts
- refer to your parts diagram for a complete list of parts included
Reliance Gas Thermopile Assembly 100112330 9007876005 9007870005 100093980 Water Heater Pilot Assy Compatible with Reliance, State, A.O. Smith, and American Branded Heaters
Last update was on: Tuesday, May 26, 2020
- Gas Thermopile Assembly for hot water heaters 100112330 9007876005
- PILOT/THERMOPILE W/TUBING,NATURAL
- A service technician is recommended for this repair because the gas supply line connections must be checked for leaks after the repair
Rheem / PROTECH SP20075 Pilot Assembly
Last update was on: Tuesday, May 26, 2020
- PROTECH is Rheem’s OEM (original equipment manufacturer) brand for Rheem Factory Authorized Parts.
- Rheem/PROTECH Water Heater Pilot Assembly for select natural gas water heaters
- Kit Includes: Pilot Assembly, Burner Door Gasket, Screws, Tinnerman Clips and Instructions
- Ensures safe and reliable operation
- Torx screw driver not included
Product Description
Rheem/PROTECH Water Heater Pilot Assembly for select natural gas water heaters. Key Words: Rheem PROTECH Water Heater Service Part Pilot Assembly
From the Manufacturer
Rheem’s PROTECH brand Pilot Assembly kit includes: Pilot Assembly, Burner Door Gasket, Screws, Tinnerman Clips and Instructions
Rheem SP20060 Electric Water Heater Tune-Up Kit
Last update was on: Tuesday, May 26, 2020
- SP20060
- Repair Kit
- Plumber’s Pack
Size:1 Pack
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Rheem 240V Heating Chamber RTEX-13 Residential Tankless Water Heater
Last update was on: Tuesday, May 26, 2020
- External adjustable digital thermostatic control with LED display (+/1 degree accuracy
- Durable Copper immersion two heating elements, field Serviceable.Self-modulating power control
- Simple installation – 3 foot electric cable and 1/2 NPT adapters included
- side 1/2 inch Compression water connections
- 99.8% energy efficient. External controls to adjust temperature in increments of 1°f. Water-Saver Shower Head – 1.5 GPM
- Threaded for easy replacement, simple installation, digital temperature display
- 54 A
Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications
Conclusion
By our suggestions above, we hope that you can found Ao Smith Or Rheem Water Heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Ao Smith Or Rheem Water Heater, eg:
- What are Top 10 Ao Smith Or Rheem Water Heater for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Ao Smith Or Rheem Water Heater to buy?
- What are Top Rated Ao Smith Or Rheem Water Heater to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ao Smith Or Rheem Water Heater?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ao Smith Or Rheem Water Heater.
- Before deciding to buy any Ao Smith Or Rheem Water Heater, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Ao Smith Or Rheem Water Heater and What you should consider when buying the Ao Smith Or Rheem Water Heater and Where to Buy or Purchase the Ao Smith Or Rheem Water Heater. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Ao Smith Or Rheem Water Heater of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ao Smith Or Rheem Water Heater.
The Best Ao Smith Or Rheem Water Heater
We spent many hours on research to finding ao smith or rheem water heater./, reading product features, product specifications for this guide. For those of you who wish to the best ao smith or rheem water heater./, you should not miss this article. ao smith or rheem water heater./ coming in a variety of types but also different price range. The following is the top 10 ao smith or rheem water heater./ by our suggestions
875 reviews analysed
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Last update was on: Tuesday, May 26, 2020
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Size:7-Gallon
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Last update was on: Tuesday, May 26, 2020
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Size Name:Complete Kit
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
100305721 A.O. Smith Product Preservers Powered Anode Rod System
Last update was on: Tuesday, May 26, 2020
- The Product Preservers Powered Anode System uses patented adaptive technology that quickly adjusts to your water type providing the precise amount of current needed to deliver the best protection for your water heater tank
- Consistent protection is paramount in maintaining the integrity of the steel water heater tank. Built-in LED fault light and audible alarm provides peace of mind knowing the system is working properly.
- Installation is made easy for professionals with a small control box that can plug into any standard 120 volt wall outlet.
- Eliminates smelly water issues caused by sacrificial magnesium anodes. – Protects for years
- no maintenance required. – Great for softened water applications.
- The system is great for residential gas or electric 30-50 gallon water heater installations
The Product Preservers Powered Anode System is an ideal solution for eliminating smelly water caused by sacrificial magnesium anodes or to replace aluminum anodes where aluminum hydroxide is a problem. The system is also great for new residential gas or electric 30-50 gallon water heater installations providing protection for years with virtually no maintenance required. Protect your investment with a permanent anode rod made of titanium and mixed metal oxide that will never be depleted unlike traditional sacrificial anodes. This latest technology allows the system to quickly adjust to local water conditions providing the precise amount of current for the best protection of the water heater tank. Protection is maintained as long as the control module remains connected to a power source and continually adjusts the amount of protection needed. Additional features include a built-in LED fault light and audible alarm that provide peace of mind knowing the system is working properly.
Reliance Gas Thermopile Assembly 100112330 9007876005 9007870005 100093980 Water Heater Pilot Assy Compatible with Reliance, State, A.O. Smith, and American Branded Heaters
Last update was on: Tuesday, May 26, 2020
- Gas Thermopile Assembly for hot water heaters 100112330 9007876005
- PILOT/THERMOPILE W/TUBING,NATURAL
- A service technician is recommended for this repair because the gas supply line connections must be checked for leaks after the repair
Rheem 240V Heating Chamber RTEX-13 Residential Tankless Water Heater
Last update was on: Tuesday, May 26, 2020
- External adjustable digital thermostatic control with LED display (+/1 degree accuracy
- Durable Copper immersion two heating elements, field Serviceable.Self-modulating power control
- Simple installation – 3 foot electric cable and 1/2 NPT adapters included
- side 1/2 inch Compression water connections
- 99.8% energy efficient. External controls to adjust temperature in increments of 1°f. Water-Saver Shower Head – 1.5 GPM
- Threaded for easy replacement, simple installation, digital temperature display
- 54 A
Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications
Rheem SP20060 Electric Water Heater Tune-Up Kit
Last update was on: Tuesday, May 26, 2020
- SP20060
- Repair Kit
- Plumber’s Pack
Size:1 Pack
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Rinnai RU180iN Sensei Super High Efficiency Tankless Water Heater, 10 GPM – Natural Gas: Indoor Installation
Last update was on: Tuesday, May 26, 2020
- RU180iN Sensei SE+ Super High Efficiency Tankless Hot Water Heater – Natural Gas: Indoor Installation Only
- Up to 10 GPM hot water flow rate (varies by groundwater temp)
- 15,000 BTU (Minimum) / 180,000 BTU (Maximum)
- Circ-Logic technology allows you to set recirculation patterns that coincide with your typical habits. Hot water is available when you need it!
- Endless hot water for your entire home
- Residential Factory Warranty – 120 months (heat exchanger), 12 months (labor), 60 months (parts)
Style:RU180in – Natural Gas/10 GPM
Enjoy an endless supply of hot water with the SENSEI™ RU180iN Super High Efficiency Plus condensing tankless water heater from Rinnai. Only the size of a small suitcase, the natural gas RU180iN model is compact, easy-to-install and perfect for indoor locations.
Kenmore 9003382005 Water Heater Burner Assembly Genuine Original Equipment Manufacturer (OEM) Part
Last update was on: Tuesday, May 26, 2020
- This part is compatible with models including
- XCV50,GCV50,FCV50
- This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
- 183222,183222-000
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Ao Smith
- This burner assembly (part number 9003382005) is for water heaters
- The assembly may include multiple parts
- refer to your parts diagram for a complete list of parts included
EZ Ultra HE Natural Gas Condensing Tankless Water Heater
Last update was on: Tuesday, May 26, 2020
- Condensing Technology – The EZ Ultra HE uses exhaust gas to preheat incoming water for added efficiency.
- This heater can be vented horizontally or vertically using 2″ Solid Core Schedule 40 PVC/CPVC
- Back-draft prevention device and stainless steel horizontal vent pipe are included.
- Capacity Up to 3.4 GPM @ 45F Rise In Ambient Temperature
- FREE SHIPPING
Rinnai RL Series HE+ Tankless Hot Water Heater: Indoor Installation
Last update was on: Tuesday, May 26, 2020
- Endless hot water for your entire home
- RL75iN HE+ High Efficiency Tankless Hot Water Heater – Natural Gas: Indoor Installation Only
- Up to 7.5 GPM hot water flow rate (varies by groundwater temp)
- Circ-Logic technology allows you to set recirculation patterns that coincide with your typical habits. Hot water is available when you need it!
- Residential Factory Warranty – 120 months (heat exchanger), 12 months (labor), 60 months (parts)
Color:RL75iN – Natural Gas/7.5 GPM
Product Description
non-Condensing Tankless Water Heater
From the Manufacturer
Stop planning your mornings and evenings around your water heater. Set your own schedule, thanks to the R75LSi. Ideal for two- to three-bathroom homes, the R75LSi delivers up to 7.5 gallons of hot water per minute (GPM), while saving energy and money. Mount your compact R75LSi in virtually any room, and vent directly to the outside with a single wall or roof penetration.
Conclusion
By our suggestions above, we hope that you can found Ao Smith Or Rheem Water Heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Ao Smith Or Rheem Water Heater, eg:
- What are Top 10 Ao Smith Or Rheem Water Heater for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Ao Smith Or Rheem Water Heater to buy?
- What are Top Rated Ao Smith Or Rheem Water Heater to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ao Smith Or Rheem Water Heater?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ao Smith Or Rheem Water Heater.
- Before deciding to buy any Ao Smith Or Rheem Water Heater, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Ao Smith Or Rheem Water Heater and What you should consider when buying the Ao Smith Or Rheem Water Heater and Where to Buy or Purchase the Ao Smith Or Rheem Water Heater. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Ao Smith Or Rheem Water Heater of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ao Smith Or Rheem Water Heater.
yesallevent 
