Top 10 Ao Smith Expansion Tank Tta 30

WATTS WATER TECHNOLOGIES GIDDS-1030401 Potable Water Expansion Tank, Model #Plt-5, Stainless Steel Nipple, 2.1 Gallon, Lead Free

Amtrol ST-12 THERM-X-TROL Expansion Tank, 4.4 Gallon (141N43) What Is Thermal Expansion? With modern plumbing codes mandating backflow prevention, thermal expansion can cause pressure buildup in domestic water systems. When demand is put upon a potable water system, hot water is drawn from the water heater. Cold water from the supply line enters the water heater to replenish it. The colder water is heated to replace the hot water used. With the installation of a backflow preventer, check valve or pressure reducing valve on the supply line, the water heater and the system piping form a closed plumbing system under pressure. As the water is heated, thermal expansion occurs. Pressure increases until the relief valve opens and the expanded water “spills” from the water heater. This “spillage” results in wasted BTU’s and a potential safety hazard for the homeowner. Closed Potable Hot Water system without THERM-X-TROL Backflow preventer, pressure reducing valve or meter causes expanded (heated) water to build pressure causing the relief valve to open resulting in: Wasted BTU’s Shortened water heater life Wasted municipal water and sewer dollars Potential safety hazard for homeowner The Amtrol THERM-X-TROL ST-12 Expansion Tank is designed to eliminate this problem by providing control of maximum pressures at a level below the relief valve setting. It also provides an additional space in the system to accommodate the increased volume of water created by thermal expansion, returning it to the system when hot water delivery is demanded.

The AMTROL therm-x-span T-5 expansion tank has a steel shell, plastic liner and rubber diaphragm with a brass system connection. The maximum operating temperature is 200F and the maximum working pressure is 150 psig.

The Eastman 60022 2-Gallon Thermal Expansion Tank provides a secure connection to water heaters that prevents dangerous build-ups of pressure. This water heater expansion tank stops hot water from backflowing into the cold water line and it also prevents hot water from escaping through the pressure relief valve and onto the floor. Constant fluctuations in water pressure can be dangerous and they can damage the water heater, properly installing a thermal expansion tank can solve all these issues.

The thermal expansion tank has a high-quality butyl rubber diaphragm and 304 stainless steel fittings for long-lasting performance. This product comes factory pre-charged at 40 psi. It complies with Lead-Free Law.

What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.

Technical Features

• Certified synthetic SBR rubber diaphragm
• MIG welding eliminates interior rough spots and sharp edges
• Each tank is factory leak tested to ensure tank integrity
• All diaphragms designed to maximize drawdown
• External baked epoxy-polyester coating provides a durable appliance finish
• Welded side outlet allows easy and quick installation
• Protected pre charge valve eliminates potential leak path
• Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle

Additional Description

• Shell: Carbon Steel
• Connection: Carbon Steel
• Diaphragm: SBR Synthetic Rubber
• Color: Gray

Operating Conditions

• Max. Operating Pressure: 75 PSI
• Operating Temperature: 210 Degrees Fahrenheit
• Factory Precharge: 12 PSI
• Warranty: 1 Year

Specifications

• Model Number: FTH15
• Tank Size: 2.1 Gallons
• Tank Weight: 4.6 Pounds
• Connection Size (National Pipe Thread): 1/2" Male Iron Pipe (MIP)
• Dimensions (LxWxH): 9" x 9" x 13"
• Acceptance Volume: 1.4 Gallons
• UPC Code: 80459513060

The well-x-trolley WX-302 Pressure tank floor stand model is specifically designed for larger homes and institutions such as country clubs farms nursing homes etc. This handles The demands of larger systems in a minimum of space. Exclusive butyl diaphragm along with the 100% corrosion resistant virgin polypropylene liner are secured by a positive hoop ring seal for added strength and reliability. This totally integrated system outperforms other types of water chamber designs. The stainless steel air valve is welded rather than threaded to prevent loss of air pressure. The finest quality custom Mill steel is used in the deep drawn dome for extra strength while keeping tank weight to a minimum. Note: all tanks are pre-pressurized at 38 PSI and should always be set 2 PSI below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 psi differential between cut in and cut out. Installation operation and maintenance for well-x-trolley tanks PDF 1Mb

Product Description

Amtrol Inc. designed and patented the first Extrol diaphragm expansion tank in 1954 to control system pressure and help reduce energy consumption in heating and chilled water systems. Over six decades later, Extrol is still the world’s leading expansion

From the Manufacturer

Amtrol Inc. designed and patented the first Extrol diaphragm expansion tank in 1954 to control system pressure and help reduce energy consumption in heating and chilled water systems. Over six decades later, Extrol is still the world’s leading expansion

Product description

Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Waterworker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.

WellMate® composite tanks are the tank of choice in residential and commercial applications for their unmatched durability. Their fiberglass construction makes the tanks impervious to rust. In addition, their epoxy-resin sealed outer shell will not dent and the scratch-resistant paint eliminates touch-ups, making WellMate tanks virtually maintenance-free. Less than half the weight of steel tanks, WellMate tanks install more quickly and at a lower cost than the competition. Their lead-free construction makes them corrosion resistant and will not introduce undesirable chemicals or elements into the water.

Our WM-Series offers features and benefits steel tanks just can’t match. From their corrosion-proof composite construction. to their lighter weight, easier maintenance and less expensive installation. WM-Series pressure tanks are the preferred choice of professionals.

The Well-X-Troll WX-350 Professional Stand is specifically designed for larger homes and institutions such as country clubs, farms, nursing homes, etc. This handles the demands of larger systems in a minimum of space. Exclusive butyl diaphragm along with the 100 percent corrosion resistant virgin polypropylene liner are secured by a positive hoop ring seal for added strength and reliability. This totally integrated system outperforms other types of water chamber designs. The stainless steel air valve is welded rather than threaded to prevent loss of air pressure. The finest quality custom mill steel is used in the deep drawn dome for extra strength while keeping tank weight to a minimum. Amtrak invented the first pre-pressurized well tank over 50 years ago. This revolutionary product featured an innovative design using a hoop ring and groove to lock the diaphragm, liner and shell together in a totally unique way. This tradition of innovation continued with Amtrak’s Next Generation Well-X-Troll, which utilized high strength steel to deliver 150 psi working pressure – 20 percent higher than competitive well tanks. Note:  all tanks are pre-pressurized at 38 psi and should always be set 2 psi below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 psi differential between cut in and cut out.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Ao Smith Expansion Tank Tta 30, eg:

• What are Top 10 Ao Smith Expansion Tank Tta 30 for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Ao Smith Expansion Tank Tta 30 to buy?
• What are Top Rated Ao Smith Expansion Tank Tta 30 to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ao Smith Expansion Tank Tta 30?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ao Smith Expansion Tank Tta 30.
• Before deciding to buy any Ao Smith Expansion Tank Tta 30, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Ao Smith Expansion Tank Tta 30 and What you should consider when buying the Ao Smith Expansion Tank Tta 30 and Where to Buy or Purchase the Ao Smith Expansion Tank Tta 30. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Ao Smith Expansion Tank Tta 30 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ao Smith Expansion Tank Tta 30.