yesallevent 
Nowadays, there are so many products of anet cooling blower fan in the market and you are wondering to choose a best one. You have searched for anet cooling blower fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings anet cooling blower fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)
- ✹✹ Power Connection: 2 Pin-ph2.5
- Low noise while cooling the hot end of heatsinks.
- ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
- ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
- ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
- ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!).
Similar items with 4 stars and above
Aceirmc 2pcs 5015 3D Printer DC Brushless Blower Cooling Fan for RepRap i3 CR-10 and Other Small Appliances Series Repair Replacement (12V)
- Package Content : 2 x DC Brushless Cooling Fan (50mm x 50mm x 15mm)
- For 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement
- Anet A8 A6 DC Cooling Fan Ultra-quiet Oil Bearing about 7500 RPM Turbo Fan For 3D Printer 5015 Blower
- Rated Voltage: DC 12V/24V, Current: 0.18A /0.17A
- Connector: 2 Terminal Connector
- Blade 5015
Type: Centrifugal Blower Size : 12V：50 * 50 * 15 mm
Bearings: Oil
Voltage : 12V/24V
Current : 0.18A/0.17A
Air inlet size: 31mm
Scope: humidifiers , heaters, clothes dryers , etc.
Package including: 2x Blower Fan
WINSINN 50mm Blower Fan 12V 5015 50x15mm Turbine Turbo Brushless Cooling for DIY 3D Printer Extruder Hotend MK2 MK3 MK7 MK8 (Pack of 4Pcs)
- ✔️Oil bearings 5015 Blower Fan – High Speed version
- ✔️️Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
- ✔️️Rated voltage: DC 12V
- ✔️️Size: 50x50x15mm
- ✔️️Made by WINSINN
►Oil bearings 5015 Blower Fan – High Speed version
►Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
►Size: 50x50x15mm
►Rated voltage: DC 12V
►Line length: about 1.18in / 30mm
—————————————————————————————————————
Package include:
►4 x High Speed 5015 12V Blower Fan
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
Similar items with 4 stars and above
SoundOriginal 12V DC Brushless Blower Cooling Fan 50x50x15mm,for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (12v Dual Ball Bearing 2pack)
- Cooling Blower Fan 12vdc 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)
- Bearing Type: Dual Ball Bearing, Speed: 5800 RPM, Air Flow : 3.6 CFM bearing made in Japan. Guaranteed to continuously run 40,000 hours under normal temperature.
- Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H)
- Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″
- Mounting Spacing : 5.8cm/2.3″
- Weight : 26g
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Fans
Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
- Premium quiet fan, 40x40x10 mm, 12V, 3-pin Molex, 4500/3700 RPM, max. 17.9 dB(A), >
- 150,000 h MTTF
- Award-winning 40x10mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- Ideal replacement for noisy or broken 12V 4cm fans in 3D printers, DVRs, NAS, switches, routers, other network and storage devices, etc.
- 3-pin 12V FLX version can be run 4500 or 3700 rpm using the supplied Low-Noise Adaptors to fine-tune the fan for maximum airflow or near-silent operation
- Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers
Anet Brushless DC Cooling Fan for 3D Printer Hot End, 2 Packs 40mm x 40mm x 10mm 4010 12V 2 Pin 3D Printer Fans Black
Features:
Cooling fan for 3D printer hot ends, extruder & so on.
6000r/min rated speed, with low noise.
Rated power: DC 12V
2Pin connector, wire length approx. 100cm / 39.4in.
Size 40 * 40 * 10mm.
Specifications:
Cable Length: Approx. 100cm / 39.4in
Size: 40 * 40 * 10mm / 1.6 * 1.6 * 0.4in
Speed: 6000r/min
Rated Power: DC 12V 1.4W
Connector: 2Pin
Noise: 20dBA
Package List:
2* Cooling Fan
Conclusion
By our suggestions above, we hope that you can found anet cooling blower fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
