yesallevent 
Nowadays, there are so many products of engine cooling fan metal in the market and you are wondering to choose a best one. You have searched for engine cooling fan metal in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings engine cooling fan metal which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
TYC 621450 Chevrolet HHR Replacement Radiator/Condenser Cooling Fan Assembly
- OE-comparable, perfectly balanced unit ensures ease of installation
- Unitized replacement unit with fan, motor, and shroud maximizes efficiency in replacement
- All components are new, not refurbished
- All units are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit
- Legal compliance through patent license agreements with Bosch/Continental VDO (where applicable) for turbine-like blade and shroud designs, providing an additional level of confidence and protection
TYC cooling fan assemblies are designed to be equivalent to OE in performance, validated through air-volume testing that simulates cooling ability. Each unit is a complete assembly with motor, fan, and shroud to simplify replacement. To ensure durability, each cooling fan design is run through a series of tests, including endurance, torsion, and resistance to vibration, moisture, and corrosion. In addition, each unit is subjected to a power-on test before leaving the factory to ensure functionality.
Universal Slim Fan Push Pull Electric Radiator Cooling Fans 12V 80W Engine Fan with Mount Kit （Diameter 8.27" Depth 2.56")
- Overall Diameter:8.27 INCH, Overall Thickness: 2.56 INCH
- 1000 CFM,Car Cooling Fans: Amp Draw: 6.66 amp
- Watts:80W
- Blade Length: 7inch
- Number of Blades: 10
- Blade Type: straight
- High-quality, lightweight, and durable
- great as replacement or upgrade from factory parts.
- Simple installation, no modifications required.Fan can be used as pusher or puller with the adaptable mounting kit.
- How to choose the correct fan?Step 1:Confirm the width and depth of your radiator Step 2:Compare the fan diameter and depth with radiator Step 3: Choose the right size fan ATTENTION:It can be installed only if the diameter of the fan is smaller than the width of radiator! Make sure the depth of the fan is smaller than the gap of radiator and other parts!
Similar items with 4 stars and above
LICHIFIT DJC-0641 LS3 V8 6.2L Engine Realistic Motor with Radiator Cooling Fan Temperature Sensor Common Use for 1/10 Scale Trx4 Jeep Land Rover d90/110/130
- Common use, can be applied on trx4, scx10, scx10II motor, the OD of motor can be 36mm-38mm.
- Temperature sensor with fan set inside, the fan will be activated when 35℃ above, and will stop when 25℃ below. High speed fan, with 25CFM ±10% wind flow.
- Cylinder cap, ignition coil secondary cable, engine cover, exhaust manifold, air intake, common rail are heat-resistant ABS material(100℃ limited), can be painted as you like, cylinder block &oil level gauge are stainless steel material, heat sink is alu. material.
- Design based on LS3 V8 6.2Lengine , simulated cylinder cap, ignition coil secondary cable, engine cover, exhaust manifold, air intake, common rail, cylinder block, oil level gauge details.
- Length*width*height: 63mm*71mm*52mm, Weight: 60G
Attention when this product is equipped on trx4 original motor position:
One side of exhaust manifold should be removed, that will let V8 engine to enough space to be installed.
You must cut part of the body posts and mounts to have enough space to the V8 engine.
DJC-0640 trx4 dashboard & DJC-0617interior can not be used when fix V8 engine on original position, to have perfect effect, MUST apply the front-engine set (NOT INCLUDED), then DJC-0640&DJC-0617&V8 engine can work together perfectly.
Attention when apply front-engine set for trx4 use:
Exhaust manifold should be removed, that will let V8 engine to enough space to be installed. You can use DJC-0226 metal holder to have more space to let Exhaust manifold be equipped.
Packing Includes:
1 set Simulation Engine Cover + Radiator Motor Fan
American Volt 12V Electric Radiator Cooling Fan Reversible High Performance Thermo Cooler Best CFM (16" Inch, Dual Fan)
- American Volt high air flow slim 12V electric engine cooling fans.
- Custom upgraded larger watt motor produces the best CFM.
- Motors are sealed to be water/dust resistant, increasing longevity.
- Durably built to be shock resistant for on and off-road applications.
- 16″ x 16.75″ x 3″ thickness at center x 1.5″ thickness at edge
Specs below are for EACH individual fan:
6 Inch
Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 7.5″ x 6.75″ x 2.5″ center thickness & 1.5″ edge thickness
6 Inch (w/ Shroud)
Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8″ x 6.5″ x 2.5″ center thickness & 1.25″ edge thickness
7 Inch
Motor Size – 80 Watt
CFM Rating – 800
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8.5″ x 7.75″ x 2.5″ center thickness & 1.5″ edge thickness
9 Inch
Motor Size – 80 Watt
CFM Rating – 1000
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 9.75″ x 9.75″ x 2.5″ center thickness & 1.5″ edge thickness
10 Inch
Motor Size – 80 Watt
CFM Rating – 1000
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 11.5″ x 10.75″ x 2.5″ center thickness & 1.5″ edge thickness
12 Inch
Motor Size – 90 Watt
CFM Rating – 2000
RPM Rating – 2250
Amp Draw – 10 Amps
Dimensions – 12.5″ x 11.75″ x 2.5″ center thickness & 2.5″ edge thickness
14 Inch
Motor Size – 90 Watt
CFM Rating – 2500
RPM Rating – 2100
Amp Draw – 12 Amps
Dimensions – 15″ x 14″ x 2.5″ center thickness & 1.5″ edge thickness
16 Inch
Motor Size – 120 Watt
CFM Rating – 3000
RPM Rating – 2050
Amp Draw – 14 Amps
Dimensions – 16.5″ x 15.75″ x 3″ center thickness & 1.5″ edge thickness
Universal fit for Alfa Romeo Aston Martin Audi Bentley Benz BMW Cadillac Chevrolet Chrysler Citroen Corvette Daewoo Datsun Dodge Ferrari Fiat Ford Honda Hummer Hyundai Jaguar Jeep KIA Land Rover Lexus Lincoln Lotus Maserati Mazda McLaren Mercedes Mercedes-Benz Mini Mitsubishi Nissan Pontiac Porsche RAM Rolls-Royce Rover Saab Smart Subaru Suzuki Toyota Volkswagen Volvo Mercury 262 265 267 283 302 305 307 327 350 366 396 400 402 427 454 239 260 272 289
Similar items with 4 stars and above
TYC 620560 Jeep Cherokee Replacement Radiator/Condenser Cooling Fan Assembly
- OE-comparable, perfectly balanced unit ensures ease of installation
- Unitized replacement unit with fan, motor, and shroud maximizes efficiency in replacement
- TYC 620560 is replacement only for the electric type fan and not for the clutch type fan
- All units are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit
- Legal compliance through patent license agreements with Bosch/Continental VDO (where applicable) for turbine-like blade and shroud designs, providing an additional level of confidence and protection
TYC 620880 Dodge Dakota Replacement Radiator/Condenser Cooling Fan Assembly
- OE-comparable, perfectly balanced unit ensures ease of installation
- Unitized replacement unit with fan, motor, and shroud maximizes efficiency in replacement
- All components are new, not refurbished
- All units are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit
- Legal compliance through patent license agreements with Bosch/Continental VDO (where applicable) for turbine-like blade and shroud designs, providing an additional level of confidence and protection
TYC cooling fan assemblies are designed to be equivalent to OE in performance, validated through air-volume testing that simulates cooling ability. Each unit is a complete assembly with motor, fan, and shroud to simplify replacement. To ensure durability, each cooling fan design is run through a series of tests, including endurance, torsion, and resistance to vibration, moisture, and corrosion. In addition, each unit is subjected to a power-on test before leaving the factory to ensure functionality.
Omix-Ada 17102.03 Radiator Fan Shroud
Original-style radiator fan shroud from Omix-ADA.
TYC 621680 Jeep Wrangler Replacement Radiator/Condenser Cooling Fan Assembly
- OE-comparable, perfectly balanced unit ensures ease of installation
- Unitized replacement unit with fan, motor, and shroud maximizes efficiency in replacement
- All components are new, not refurbished
- All units are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit
- Legal compliance through patent license agreements with Bosch/Continental VDO (where applicable) for turbine-like blade and shroud designs, providing an additional level of confidence and protection
TYC cooling fan assemblies are designed to be equivalent to OE in performance, validated through air-volume testing that simulates cooling ability. Each unit is a complete assembly with motor, fan, and shroud to simplify replacement. To ensure durability, each cooling fan design is run through a series of tests, including endurance, torsion, and resistance to vibration, moisture, and corrosion. In addition, each unit is subjected to a power-on test before leaving the factory to ensure functionality.
TYC 620690 Honda Accord Replacement Radiator/Condenser Cooling Fan Assembly
- OE-comparable, perfectly balanced unit ensures ease of installation
- Unitized replacement unit with fan, motor, and shroud maximizes efficiency in replacement
- All components are new, not refurbished
- All units are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit
- Legal compliance through patent license agreements with Bosch/Continental VDO (where applicable) for turbine-like blade and shroud designs, providing an additional level of confidence and protection
TYC cooling fan assemblies are designed to be equivalent to OE in performance, validated through air-volume testing that simulates cooling ability. Each unit is a complete assembly with motor, fan, and shroud to simplify replacement. To ensure durability, each cooling fan design is run through a series of tests, including endurance, torsion, and resistance to vibration, moisture, and corrosion. In addition, each unit is subjected to a power-on test before leaving the factory to ensure functionality.
Flex-a-lite 418 Black Nylon 18 3/8" Belt Driven Fan
This Flex-a-lite belt-driven fan is designed to be inexpensive and light, yet still provide maximum cooling. Lightweight nylon construction relieves stress on the water pump and bearings. It is ideal for race and performance applications when cost or weight is a concern.
Conclusion
By our suggestions above, we hope that you can found engine cooling fan metal for you.Please don’t forget to share your experience by comment in this post. Thank you!
