The 8 Best Closed Circuit Liquid Cooling

The LC240E RGB incorporates Cooler Master’s Dual Chamber Pump, 120mm Fan, and RGB Controller to control the lighting effects. With its matt black styling, braided cabling and RGB lighting effects, the LC240E RGB is a Cooler Master original design and enables a colorful and great performing entry into liquid cooling. Reliability, performance and quiet operation are ensured by its unique Dual Chamber Pump and twin 120mm fan design. Whether you’re building new or just upgrading, it’s easy to install on the latest Intel or AMD systems and 240mm radiator fits many performance PC chassis.

This UV kit is the perfect addition to your Eisbecher! The UV cathode illuminates the UV-reactive water from within for a unique look. Highlights 1. Two different sizes 2. Lighttower effect 3. Compatible with all Eisbecher units that have the lighttower effect 4. Waterproof UV cathode The Alphacool UV kit for the Eisbecher impressively underscores the “Eisbecher highlight” yet again. Depending on the version, continuous tubes for two different fill heights with the lighttower effect are included. Since every cathode needs an inverter, which is powered through a 4 pin molex plug, one is included as well. Installation is simple, even for amateurs. The top of the Eisbecher is screwed open, and both tubes are taken out and replaced with one of the new continuous tubes, depending on the version. The cathode, which is inside a glass tube, is inserted into the lid from above and screwed in. The final step is putting the cathode into the tube and screwing the container closed again. This will push the tube into the lid and seal it. Technical Specifications Riser Pipe Dimensions (LxD): 205 x 15mm Material: clear plastic Inverter Dimensions (LxWxH): 84 x 28 x 22mm Power connection: 4 pin Cable length: 50cm Cathode Locking screw with G1/4″ Dimensions (LxD): 155 x 8mm Colour: UV Cable length: ca. 27cm Scope of Delivery 1x Alphacool Aurora UV Kit for 250mm Eisbecher

The Enthoo Primo Special Editions comes with sandblasted aluminum panels, custom interior paint with LED lighting in matching color. Accessibility and functionality is what sets the Enthoo Primo on a level of its own. It was constructed from a builder’s point of view with the closest attention to detail. This Enthoo Primo combines innovative design and rich styling that appeal to builders of any caliber. A glimpse through the split window side panel reveals the clean interior, capable of being water cooled, air cooled, or both.

This UV kit is the perfect addition to your Eisbecher! The UV cathode illuminates the UV-reactive water from within for a unique look. Highlights 1. Two different sizes 2. Lighttower effect 3. Compatible with all Eisbecher units that have the lighttower effect 4. Waterproof UV cathode The Alphacool UV kit for the Eisbecher impressively underscores the “Eisbecher highlight” yet again. Depending on the version, continuous tubes for two different fill heights with the lighttower effect are included. Since every cathode needs an inverter, which is powered through a 4 pin molex plug, one is included as well. Installation is simple, even for amateurs. The top of the Eisbecher is screwed open, and both tubes are taken out and replaced with one of the new continuous tubes, depending on the version. The cathode, which is inside a glass tube, is inserted into the lid from above and screwed in. The final step is putting the cathode into the tube and screwing the container closed again. This will push the tube into the lid and seal it. Technical Specifications Riser Pipe Dimensions (LxD): 104 x 15mm Material: clear plastic Inverter Dimensions (LxWxH): 84 x 28 x 22mm Power connection: 4 pin Cable length: 50cm Cathode Locking screw with G1/4″ Dimensions (LxD): 107 x 8mm Colour: UV Cable length: ca. 27cm Scope of Delivery 1x Alphacool Aurora UV Kit for 150mm Eisbecher

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 13/10mm This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. Sixpack: Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit! Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 20mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 – Chrome sixpack

Conclusion

By our suggestions above, we hope that you can found closed circuit liquid cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!