Best Cooling Liquid Coolant

As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.

********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
Tyler Direct is not responsible for any hardware damage. Use at your own risk.

Koolance 702 series coolant is used by many industries requiring a high performance, low-toxicity, reliable coolant with corrosion and biological inhibitors. A high quality coolant is extremely important for addressing dissimilar metals and biologic growth (bacterial and algae) long-term. Koolance liquids will not clog components and can typically be used for 2-3 years before replacement is recommended. (Coolant shelf life is 3 years.)

This container includes 700ml (24 fl oz) of prediluted coolant and can function as a squirt bottle for convenient reservoir filling. It’s recommended to replace the coolant at least every 2-3 years, or immediately if there is any change in color or clarity.

The freezing point is -15°C (5°F). This coolant has been tested with the following materials:

• Metals: copper, brass, aluminum, stainless steel, nickel, steel, gold, lead
• Plastics: ABS, PA66, PBT, PE, PEI, PES, PETG, PMMA, POM, PP, PPE, PPO, PPS, PTFE, PU, PVC
• Rubber: EPDM

NOTE: Not recommended for polycarbonate plastics or other PC-based plastics.

Additional Specifications

• Color: Yellow
• Volume: 700mL (23.67 fl oz)
• Freezing Point: -15°C (5ºF)
• Electrical Conductivity (µS/cm): 2500
• UV Reactive: Yellow
• Specific Gravity @20°C: 1.03
• Viscosity @20°C (cP): 2.3

PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. This revolutionary cooling formulation takes a giant step in the world of water cooling-leaving the competition in a puddle of their own sweat. PC Ice is intended for the casual user looking to get into water cooling without worrying about their system springing a detrimental leak*. Its clean, low viscosity and low chemical makeup creates an excellent coolant for your PC. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. The name hasn’t changed, the performance is still top notch, the cost is still outstanding, leaving PC Ice ounce for ounce STILL your best choice.
WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

USAGE NOTES: *Low-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

**DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. Adding additional agents will cause a chemical reaction with the agent currently in the fluid. It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up. Packaging Notes: Amazon requires that all bottles have taped lids for shipping.

The LEPA Exllusion 240 is a closed-loop water cooler, great for power users and overclockers seeking quiet and high performance liquid cooling for their extreme systems. Equipped with copper base with CDP (Central Diffusing Passage) cold plate, 240mm aluminum radiator, two 120mm Dual-Convex-Blades fans, this model delivers up to 400W+ TDP cooling capacity to handle the extremely overclocked processor. Great for DIY professionals, this semi-DIY water cooling solution features coolant refillable design, and included red, blue, green dyes allow users to customize the preferred coolant color. Thus users can customize the tone of their coolant to their wildest imagination.

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

Introducing the next level in PC liquid cooling, the Thermaltake C1000 Opaque Vivid Color Coolant Series. Made in Germany, the C1000 Opaque coolants are a non-transparent, virtually odorless, biodegradable, high performance PC liquid. Offering ideal protection for PC cooling systems using copper, nickel, brass or aluminum materials, the C1000 also supports anti-rust, anti-freezing and water scale prevention. Take control of colorizing any system from seven vivid colors: red, green, blue, orange, yellow, white, and purple to brighten up any build with Thermaltake.

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 186 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 160 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

The PrimoChill Liquid Filling Bottle is a great tool for adding and removing fluid from your system. Filling the bottle with your desired coolant and then squeezing the bottle will allow you to control the amount of added coolant easily. This is a perfect technique for topping your system off. You can also remove the internal straw to use this for removing fluid. Squeezing the bottle will remove some air and act as a vacuum. This can be especially handy when trying to remove fluid pools from tight spaces.

Specifications

Included Parts

Warnings:PrimoChill is not responsible for any hardware damage. Use at your own risk.

PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. This revolutionary cooling formulation takes a giant step in the world of water cooling-leaving the competition in a puddle of their own sweat. PC Ice is intended for the casual user looking to get into water cooling without worrying about their system springing a detrimental leak*. Its clean, low viscosity and low chemical makeup creates an excellent coolant for your PC. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. The name hasn’t changed, the performance is still top notch, the cost is still outstanding, leaving PC Ice ounce for ounce STILL your best choice.
WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

USAGE NOTES: *Low-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

**DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. Adding additional agents will cause a chemical reaction with the agent currently in the fluid. It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up. Packaging Notes: Amazon requires that all bottles have taped lids for shipping.

Conclusion

By our suggestions above, we hope that you can found cooling liquid coolant for you.Please don’t forget to share your experience by comment in this post. Thank you!