Top 10 Ao Smith V260 Well Water Pressure Tank

Product Description

At air valve, check tank air pressure with tire gauge. If needed, adjust tank pressure up or down

BODY CONSTRUCTION: Heavy Gauge Steel
BODY FINISH: Electrostatically Applied Baked-On Polyester
TANK PRECHARGE: 40 psi Nitrogen-Rich Charge
TANK CAPACITY: 35 gal
EQUIVALENCY RATING: 82 gal
DRAWEOWN WITH 20/40 SWITCH: 12.7 gal
DRAWDOWN WITH 30/50 SWITCH: 10.7 gal
DRAWDOWN WITH 40/60 SWITCH: 9.3 gal
BLADDER / WATER CELL: One Piece Seamless PVC
TANK DIAMETER: 20″
TANK HEIGHT: 36-1/4″
FLANGE: Glass-Filled Polypropylene
PIPE TAP SIZE: 1″ NPT
DISTANCE FLOOR TO TAP CENTER: 2″
MAXIMUM PRESSURE RATING: 100 PSI

From the Manufacturer

Vertical Pre-Charged pressure tank. This tank holds 35-Gallons but is equal to an 82-Gallon standard tank in performance.

Product description

Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Waterworker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.

The Well-X-Troll WX-350 Professional Stand is specifically designed for larger homes and institutions such as country clubs, farms, nursing homes, etc. This handles the demands of larger systems in a minimum of space. Exclusive butyl diaphragm along with the 100 percent corrosion resistant virgin polypropylene liner are secured by a positive hoop ring seal for added strength and reliability. This totally integrated system outperforms other types of water chamber designs. The stainless steel air valve is welded rather than threaded to prevent loss of air pressure. The finest quality custom mill steel is used in the deep drawn dome for extra strength while keeping tank weight to a minimum. Amtrak invented the first pre-pressurized well tank over 50 years ago. This revolutionary product featured an innovative design using a hoop ring and groove to lock the diaphragm, liner and shell together in a totally unique way. This tradition of innovation continued with Amtrak’s Next Generation Well-X-Troll, which utilized high strength steel to deliver 150 psi working pressure – 20 percent higher than competitive well tanks. Note:  all tanks are pre-pressurized at 38 psi and should always be set 2 psi below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 psi differential between cut in and cut out.

Product Description

Factory pre-charge: 38 psi (pounds per square inch). maximum working pressure 100 psi. Maximum operating temperature 200 F (Degree Fahrenheit). engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Water worker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets nsf (National Sanitation foundation) standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.This is a Hazmat non-returnable item

ORDER INCLUDES THE FOLLOWING ITEMS: ****(1) 11" Tank tee with 1" port that screws into the port at the bottom of the pressure tank. Tee has BOTH 1" MALE and 3/4" FEMALE ports for connecting to your incoming /outgoing lines **** 1—FSG2 Square D pressure switch ON 40 PSI…OFF 60PSI PRESET**** (1) 100 psi PRESSURE GAUGE**** (1) PRESSURE RELIEF, SAFETY VALVE 1/2" MPT 100psi or 75psi rating, depending on what I have in stock…Please ask if you have preference**** (1) BOILER DRAIN / HOSE BIB VALVE 1/2" MPT….may or may not be style pictured…same quality, same function though**** (1) 1/4" BRASS NIPPLE FOR ATTACHING PRESSURE SWITCH**** (1) FREE ROLE OF TEFLON TAPE

2. 1 us gal (8L) in-line captive air pressure tank. Designed for water systems assembled with a jet pump. Tough epoxy-baked finish for durability. Replaceable bladder made of synthetic butyl rubber to increase reliability and life span. No water to metal contact for rust-free operation. Stainless steel flange with 1 inch NPT connection. 100 psi maximum working pressure. For use with a 20/40 psi pressure switch, the air pressure must be adjusted to 18 psi; for a 30/50 psi switch, the pressure must be adjusted to 28 psi. Drawdown 0. 7 us gal (20/40 psi); 0. 6 us gal (30/50 psi).

Product Description

Water worker well tank, horizontal pre-charged, series: ht-20hb, 20 gal capacity, 29 in diameter, 16 in height, 1 in connection, MNPT connection, steel, 100 psi, 200 deg F, nsf approved, 42 gal equivalency, for residential. Polypropylene-lined steel supports water weight to ensure water never sits in loose-fitting vinyl or rubber bags that can fold, crease and wear. Liner does not require scheduled replacements for long-lasting use formed liner fits the steel shell for added durability nsf certified. This pre-charged water tank is designed to maintain its air charge for years for easy upkeep. The tank uses a thick diaphragm to keep water separate from pre-charged air and to help reduce air loss. The tank’s steel shell with deep-drawn construction helps support water weight, while its polypropylene line helps prevent air and odors from being absorbed into the water.Pre-charged tanks are rated to compare with equivalent-size conventional (standard) tanks in terms of water drawdown between pump cycles. The ACTUAL physical size of a pre-charged tank is much less and allows space savings up to 50% when comparing drawdown and size to that of a conventional tank. Economy is achieved with the smaller size of pre-charged tanks compared to similar water delivery and size of conventional tanks. This tank has a rated size of 42 gallons; the ACTUAL tank capacity is 20 gallons. Max. Psi: 100, dimensions D x h (in.): 30 x 15, discharge port (in.): 1, Max. Capacity (gal.): 20, includes: tank, material: steel, polypropylene.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.

WellMate® composite tanks are the tank of choice in residential and commercial applications for their unmatched durability. Their fiberglass construction makes the tanks impervious to rust. In addition, their epoxy-resin sealed outer shell will not dent and the scratch-resistant paint eliminates touch-ups, making WellMate tanks virtually maintenance-free. Less than half the weight of steel tanks, WellMate tanks install more quickly and at a lower cost than the competition. Their lead-free construction makes them corrosion resistant and will not introduce undesirable chemicals or elements into the water.

Our WM-Series offers features and benefits steel tanks just can’t match. From their corrosion-proof composite construction. to their lighter weight, easier maintenance and less expensive installation. WM-Series pressure tanks are the preferred choice of professionals.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Ao Smith V260 Well Water Pressure Tank, eg:

• What are Top 10 Ao Smith V260 Well Water Pressure Tank for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Ao Smith V260 Well Water Pressure Tank to buy?
• What are Top Rated Ao Smith V260 Well Water Pressure Tank to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ao Smith V260 Well Water Pressure Tank?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ao Smith V260 Well Water Pressure Tank.
• Before deciding to buy any Ao Smith V260 Well Water Pressure Tank, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Ao Smith V260 Well Water Pressure Tank and What you should consider when buying the Ao Smith V260 Well Water Pressure Tank and Where to Buy or Purchase the Ao Smith V260 Well Water Pressure Tank. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Ao Smith V260 Well Water Pressure Tank of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ao Smith V260 Well Water Pressure Tank.