yesallevent 
Nowadays, there are so many products of mk10 cooling block in the market and you are wondering to choose a best one. You have searched for mk10 cooling block in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings mk10 cooling block which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
BCZAMD MK10 All Metal Hotend Cooling Block Kit with 0.4MM Nozzle for Wanhao I3, Monoprice Maker Select 3D Printer V2, Cocoon Create 3D Printer
- This is an all metal hotend upgrade kit for MK10 style extruders
- Suitable for: Wanhao i3, Wanhao i3 Plus, Monoprice Maker Select 3D Printer V2, Monoprice Maker Select Plus, Cocoon Create 3D Printer
- Package including: Thermal Barrier Tube + Plated Nozzle 0.4mm + Slotted Cooling Block + MK10 Aluminum Heat Block (wrench+screw as gift)
- Significantly better heat transfer, easier disassemble and adjustments, precise control on bore diameter
- After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineer of technical team will always support you here.
Package includes:
1 x MK10 Slotted Cooling Block
1 x MK10 Aluminum Heat Block
1 x Thermal Barrier Tube
1 x MK10 Nozzle 0.4mm
(a wrench + a screw as gift)
All Metal Hotend with Slotted Cooling Block for Wanhao i3,0.4mm
- Applicable models: Wanhao i3,Cocoon Create 3D Printer ,Monoprice Maker Select 3D Printer v2
- Product advantage:Slotted Clamping system,no set screw to ding and damage thermal tube, significantly better heat transfer,Easier disassemble and adjustments,precise control on bore diameter
- Orifice size available:0.4mm, nozzle plated with high lubricity wear resistant coating
- Kit Includes: Wear resistant nozzle,thermal tube,slotted cooling block
- Warranty: 30 days money back or exchange,if you met problem with your kit, we will solve the problem within 24 hours, JUST MESSAGE US BEFORE LEAVING A REVIEW. We can not guarantee 0% defective rate, but we guarantee 100% satisfaction
Color: silver
Packing size: 11*13*1CM
Kit weight: 36.8G
Orifice size available: 0.4mm
Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer
Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block
All metal hotend kit features:
All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.
UKCOCO Aluminum Heat Sink Radiator, Cooling Block for 3D Printer MK10 Extruder (Blue)
Description
This item is heat sink radiator for 3D printer MK10 Extruder, which is made of solid aluminium material for durable use.
Light weight with high heat dissipation performance, nice heat sink for choice.
Features
– Material: Aluminum
– Size: 3 * 2 * 3cm
– Aluminum material, durable in use.
– A great accessory for 3D printer.
Package Including
1 x Heat Sink Radiator
YuenPau MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor
- Compatibility: Fit with MK10 hotend aluminum cooling block, such as FlashForge Creator Pro \ Creator X \ Dreamer \ finder \ inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S \ Duplicator 4X \ Duplicator i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc.
- Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece.
- Brass material advantage: The heat conductivity of brass is is several times that of stainless steel and hardened steel, It is the most suitable material for extruder nozzle to ensure accurate print temperature.
- Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy.
- Improved Version: An M3 thread hole has been added on the aluminum block to making it suitable for both M3 and M4 thermistor
Specification:
Output diameter:0.4mm;
Input diameter: 1.75mm;
Installation dimension: φ7.8mm.
Compatible with:
FlashForge Creator Pro
FlashForge Creator X
FlashForge Dreamer
FlashForge finder
FlashForge inventor
Dremel Idea Builder
PowerSpec 3D Pro
PowerSpec 3D X
Wanhao Duplicator 4S
Wanhao Duplicator 4X
Wanhao Duplicator i3
Monoprice maker select plus
Qidi tech
Cocoon Create
Package include:
Brass nozzle:1 piece;
Stainless steel throat:1 piece;
34mm PTFE tube:1 piece;
Aluminum heater block:1 piece.
MK10 3D Printer Extruders Kit 5 Pcs Aluminum Heater Block + 1.75mm Extruder Throat Tube M7 Thread + Cotton Heater Tape for 3D Printer Wanhao Filament
- ✹✹ High quality copper and stainless steel, ensure concentricity and roundness
- Designed for many common types of 3D printers, solid aluminium construction with aperture.
- ✹✹ Aluminium Heater Block for Extruders in 3D-Printers. A drilling with an M4 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M4 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M7 thread for the Nozzle.
- ✹✹ Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
- ✹✹ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better.
- ✹✹ Any questions, you can tell us and we will give you a satisfied solution!
Specification of Heater Tape:
Length: 62mm
Width: 20mm
Thickness: 2mm
Specification of Extruder Throat Tube:
Type: Nozzle Throat Pipe
Compatibility: MK10 hotend M7 thread aluminium heater block, MK10 aluminum cooling block
Outer Thread: M7
Length:26mm
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Filament Diameter:1.75mm
Material: Stainless Steel
Specification of Heater Blocks:
Name: Metal Part
Color: Silver
Size:19*19*13mm
Screw: M7 and M4
Package List:
5PCS X Heater Tape
5PCS X Extruder Tube
5PCS X Heater Blocks
Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle
- Fits: Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Printer
- .4mm Nozzle Plated with HIGH LUBRICITY WEAR RESISTANT TwinClad XT Coating
- Kit Includes: Thermal Barrier Tube, Plated Nozzle and Slotted Cooling block
- Slotted Clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer
- Made in USA by Micro Swiss
This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend
Micro Swiss Cooling Block Upgrade for Wanhao i3
This is redesigned cooling block for Wanhao i3 with the following improvements: Slotted Clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer (this is a big one!!!), Easier disassemble and adjustments, Tight control on bore diameter, This cooling block will work with original PTFE lined hotend, and with our Micro Swiss MK10 Allmetal Hotend kit.
Hemobllo Aluminum Heat Sink Radiator Cooling Block for 3D Printer MK10 Extruder (Blue)
Description
This item is heat sink radiator for 3D printer MK10 Extruder, which is made of solid aluminium material for durable use. Light weight with high heat dissipation performance, nice heat sink for choice.
Features
– Material: Aluminum
– Size: 3 x 2 x 3cm
– Side lock screw hole, small size and easy for DIY.
– Aluminum material, durable in use.
– A great accessory for 3D printer.
Package Including
1 x Heat Sink Radiator
HAWKUNG 34 Pcs 3D Printer Accessories Kit, 3 Nozzle + 3 Heater Block + 3 Throat Tube + 3 MK10 Silicone Socks + 10 Cleaning Needle + Other Parts for MK10 3D Printer 1.75mm Filament Extruder Hotend
- Cleaning needle: 10 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears.
- MK10 nozzles: Material: brass,Thread type: M7, Output diameter: 0.4 mm
- Input filament diameter: 1.75mm, Compatible with 3D printer Makerbot Creality CR-10, MK10 Makerbot Reprap Prusa I3, and fit for all 1.75 mm PLA ABS 3D printer, Supported: ABS / PLA / PETG / Carbon Fiber
- Spanners: Nozzle spanner make nozzle installation and removal easier. Suitable for MK10 nozzle. Heating block spanner only fit for MK10 heat block. Allen wrench makes mounting and dismounting small screws easier.
- Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material
- it is anti-static, non-magnetic precision tweezers.
- Silicone socks: Will keep your heater block clean and free from burnt and blackened plastic.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print.
Parameter:
MK10 nozzle:
Color: gold
Material:brass
Thread type: M7
Output diameter:0.4 mm;Input filament diameter:1.75mm
Supported:ABS/PLA/PETG/Carbon Fiber
Extruder Tube:
Type: nozzle neck
Material: stainless steel
Length: 30mm
External thread: M7
Filament diameter: 1.75mm
Heating Block:
Color: Silver
Material: Aluminum
Dimensions: 20 x 20 x 13 mm(L x W x H)
MK10 Silicone Cover:
Material: Silicone
Color: blue
Suitable for heat block size: 20 x 20 x 16.5 mm( L x W x H )
PTFE Teflon Tube:
Material: PTFE (Poly Tetra Fluoro Ethylene)
Size: outside diameter: 4mm, inside diameter: 2mm
Color: white
Length: 1m
The density is 2.15-2.20g/cm3 and the heat resistance is so nice so that it’s temperatures can up to 260℃
PC4-M6 Fittings:
PTFE Tubing OD: 4mm
Thread: M6/3mm
Material: Copper, Plastic
Color:golden+blue
PC4-M10 Fittings:
PTFE Tubing OD: 4mm
Thread: M10/6mm
Material: stainless steel,Plastic
Color:black+silver
Packing list:
5 x 0.35mm Cleaning needle
5 x 0.4mm Cleaning needle
3 x 0.4mm MK10 brass nozzle
3 x Aluminum heater block
3 x Extruder throat tube
3 x MK10 silicone socks
2 x Palette Knife
2 x Tweezers
2 x PC4-M6 quick fitting
2 x PC4-M10 straight pneumatic fitting
1 x Nozzle spanner
1 x Heater block spanner
1 x Allen wrench
1 x 1 M teflon tube
Conclusion
By our suggestions above, we hope that you can found mk10 cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!
