The Best Ao Smith Release Pilot Ignitor

This hot surface ignitor is the replacement for many York, Luxaire, Coleman, Coleman-Evcon, Fraser/Johnson, and Air Pro furnaces made by Unitary Products Group. This ignitor has insulated wires that are 5-1/4″ long. The wires are terminated with the proper OEM plug (see photos) and requires no splicing or modifications. This part will also replace the spiral ignitor used on models P1UK, P9MP, P2MP, P2DP, PAKU, PBKM, PBKD, XEUO2, XEMO2, and XEDO2. This part replaces part numbers 025-32626-000, 025-31801-000, 025-30277-700, 025-31802-000, 025-30385-700 and 025-32625-000. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a “hot spot” and lead to premature failure. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer’s brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

This silicon carbide hot surface ignitor replaces most applications on Rheem, Ruud, and Weatherking furnaces. This part is a direct replacement. It will fit exactly and requires no adapters or wiring changes. This ignitor replaces both the Norton 201 and 271 types used on Rheem, Ruud, and Weatherking furnaces. This part WILL NOT fit the -GEC and -GED “Drum” furnace models. This parts replaces part numbers 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, and 8553-5514. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a “hot spot” and lead to premature failure. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer’s brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

Weber replacement Igniter kit fits all Genesis silver, gold, & Platinum gas grills (2002 & newer. Does not fit Genesis silver/gold C models after 2003).

This ignitor is the “wide” style used on many Carrier, Bryant, Payne, and Day & Night gas furnaces. The ceramic block on this ignitor is 2″ wide, 7/8″ deep, and 5/8″ thick. There are locating ridges on all four corners of the ceramic block. The heating element portion of the ignitor is 2-1/4″ long. The lead wires are 5-1/4″ long and are terminated with a plug that has two male pins inside a housing that has one square end and one pointed end. This connection style was used on many Carrier, Bryant, Payne, and Day & Night furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Carrier Bryant Payne Day & Night part numbers LH33ZS001, LH33ZS002, LH33ZS003, and LH33ZS004. This part is covered by the exclusive Duralight two year limited replacement policy when purchased through an authorized Duralight dealer. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized OneTrip Parts dealer that you purchased the part from for details. Original equipment manufacturer’s brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications. This item is sold for professional installation only in accordance with all local, state, and national codes and licensing requirements.

This ignitor is the "wide" style used on many Carrier, Bryant, Payne, and Day & Night gas furnaces. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick. There are locating ridges on all four corners of the ceramic block. The heating element portion if the ignitor is 2-1/4" long. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a housing that has one square end and one pointed end. This connection style was used on many Carrier, Bryant, Payne, and Day & Night furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Carrier Bryant Payne Day & Night part numbers LH33ZS001, LH33ZS002, LH33ZS003, and LH33ZS004.

The Emerson 768A-815 hot surface ignitor features white Teflon coated leads, and 2 terminal amp receptacle with 083 inch female sockets. This ignitor must be used with hot surface ignition for residential furnaces (silicon nitride replacement only).

* The kit include one piece of AA battery Two outlets and one piece of double ignition sparks
* Ignition kit suitable for any gas appliance
* can be used for Grill, heater, water heater etc

‘ Hot Surface Oven Igniter, Igniter, Gas Type Nat and LP, Dial Range 3.2 to 3.6A, Capillary Length 12 In., Mounting Position All Mounting Positions, Electrical Lead 7-1/2 In. L, For Use With Gas Cooking Oven, Replaces Mfr. No. 7432P0225-60, 7432PO62-60/K, 080679701, 142-224, 336650, 4163781, 4392019, 3G8394041P03/P07/P10/P12/801, F16-743, Includes (2) Porcelain Wire Nuts ‘

Robertshaw Product 41-205TS11J 3/8″ X 3/8″ COMPLETE MAGNET & BODY ASSEMBLProduct Number 41-205

Universal hotrod hot surface igniter is a premium nitride Igniter. Replaces over 100 silicon carbide Igniters. For gas-fired forced-air furnaces, water heaters and boilers. Mounting brackets for easy installation. 5 year warranty.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Ao Smith Release Pilot Ignitor, eg:

• What are Top 10 Ao Smith Release Pilot Ignitor for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Ao Smith Release Pilot Ignitor to buy?
• What are Top Rated Ao Smith Release Pilot Ignitor to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ao Smith Release Pilot Ignitor?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ao Smith Release Pilot Ignitor.
• Before deciding to buy any Ao Smith Release Pilot Ignitor, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Ao Smith Release Pilot Ignitor and What you should consider when buying the Ao Smith Release Pilot Ignitor and Where to Buy or Purchase the Ao Smith Release Pilot Ignitor. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Ao Smith Release Pilot Ignitor of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ao Smith Release Pilot Ignitor.