yesallevent 
Nowadays, there are so many products of 12volt dc water heating element in the market and you are wondering to choose a best one. You have searched for 12volt dc water heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12volt dc water heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
DERNORD 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Fitting Double U Type
- 12v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
12V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:600 watts
Item Weight:10.95 Ounces
Product Diameter: 8mm
Tube length: 170mm
Screw Type:1”NPT
Color:White
300 Watt 12 Volt DC Submersible Water Heater Element
6 Inch 12 Volt and 24 Volt DC Submersible Water Heater Elements – Low Voltage Can be used direct with batteries, solar panels, hydroelectric generators, as a wind turbine dump diversion load. DO NOT USE GRID POWER AS IT WILL IMMEDIATELY DESTROY THE ELEMENT! Can also be used as a solar panel dump load. Uses: Livestock water tank de-icer (low amp draw means you won’t drain your battery as fast). For keeping dog, cat, chicken, and other domestic animals’ water from freezing. Standard American water heater element replacement for on or off grid applications Water preheating Campers, motor homes and RVs Emergency hot water Portable commercial, industrial machines and equipment Runs off your car battery for portable hot water anywhere Direct wind and solar applications Concrete mixing trucks Use for DIY solar batch water heaters For heating motor oil, vegetable oil, or most any other oils or liquids and many more uses where heat or diversion loads are needed.
200 Watt 12 Volt DC Submersible Water Heater Element
Dernord 36V 1200W Stainless Steel Heating Element Immersion Heater Submersible Water Heater Element with 1 Inch NPT Fitting Double U Type
- 36v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
36V 1200W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 36v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:36volts
Wattage:1200 watts
Item Weight:11ounces
Product Diameter: 8mm
Tube length: 7.5 Inch
Screw Type:1”NPT
Color:White
DERNORD 12V 150W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Flange
- 12v heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and CUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
12V 150W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:150 watts
Item Weight:7.7 ounces
Product Diameter: 8mm
Tube length:175mm
Screw Type:1”NPT
Color:White
Bestol 2pcs PTC Heating Element 50W AC DC 12V 220 Degree consistant Temperature Ceramic Thermostatic
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.
Product Name :PTC Heating Element
Size(Approx.) :50×15×3.5mm
Voltage 12V AC/DC
Temperature:220 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 12V 220 Degree Celsius PTC Heater Element
DERNORD Cartridge Heater 12V 100W Electric Hot Rod Stainless Steel Heating Element Replacement
- Cartridge Heater 12v 100w
- Tube diameter: 8mm （0.32 Inch）
- Tube length: 100mm （3.94 Inch）
- Cartridge heaters is consist of a cylindrical stainless steel 304 tube and thus provide a high corrosion prevention
- Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
Product Features
12v 100W Cartridge Heater widely used for 3D printer
From the Manufacturer
The Dernord 12v 100w Cartridge heaters are an extraordinarily versatile and durable product that is used to heat a myriad different processes from heavy industrial – plastics and packaging applications to critical care medical devices and analytical test instruments to being used on aircrafts, railcars and trucks. Cartridge heaters are capable of operating at temperatures of up to 1400F and achieving watt densities of up to 260 watts per square inch.
Application
1: Boiling water because of flange
2: Patient Comfort heating used in medical devices
3: Mold die and platen heating
4: Seal bars used in packaging equipment
5: Heating of hot stamps
Technical Details
Tube length: 100mm
Tube diameter: 8mm
Wire length: 32cm
Conclusion
By our suggestions above, we hope that you can found 12volt dc water heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
