Top 10 Ninja Blender Blade 5 Fin Assembly

The Pro Extractor blades replacement for Ninja QB3000 series are especially designed to tear through the toughest ingredients. Leafy greens, stems, seeds, frozen fruit–they don’t stand a chance. Powerful Pro Extractor blades break down tough ingredients so no nutrient is left behind.

Compatible with the following Nutri Ninja models:

• Nutri Ninja 2-in-1 (QB3000)
• Ninja Fit (QB3000SSW)
• Nutri Ninja 2-in-1 (QB3004)
• Nutri Ninja 2-in-1 (QB3005)

Replaces part number 476KKU3000.

Blade Dimensions: 3.4 inches (diameter) x 3 inches (height)

Amount of Fins: 5 fins

Package includes: 2 (two) pro extractor blade replacements.

Disclaimer: Not an OEM product. This is not a Ninja Kitchen original product. Any use of the Ninja Kitchen brand name, model or part designation for this product is made solely for purposes of demonstrating compatibility.

Please check carefully for the model that fit for before buying.
Fits for Nutri Ninja Ninja BL770, BL771, BL772, BL773CO ,BL780, BL660, BL740 .

Warranty Policy
●All products sold by NLSD are covered by 3 months warranty.
●NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase.
●If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days.
●Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.

KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102,

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

The Pro Extractor blades replacement for Ninja QB3000 series are especially designed to tear through the toughest ingredients. Leafy greens, stems, seeds, frozen fruit–they don’t stand a chance. Powerful Pro Extractor blades break down tough ingredients so no nutrient is left behind.

Blend smoothies or nutrient juices directly in this 16 oz. cup. This cup is made of Tritan plastic, is dishwasher safe, and BPA free.

Compatible with the following Nutri Ninja models:

• Nutri Ninja 2-in-1 (QB3000)
• Ninja Fit (QB3000SSW)
• Nutri Ninja 2-in-1 (QB3004)
• Nutri Ninja 2-in-1 (QB3005)

Replaces OEM parts # 476KKU3000, 303KKU and 445KKU3000.

• 16 oz. Cup Dimensions: 3.25 inches (diameter) x 7 inches (height)
• Blade Dimensions: 3.4 inches (diameter) x 3 inches (height)
• Amount of Fins: 5 fins

Package includes:

• 1 (one) pro extractor blade replacements;
• 2 (two) 16 oz cup replacements;
• 2 (two) sip & seal lid replacements.

Disclaimer: Not an OEM product. This is not a Ninja Kitchen original product. Any use of the Ninja Kitchen brand name, model or part designation for this product is made solely for purposes of demonstrating compatibility.

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.

Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

BEFORE PURCHASING please check your existing blade for the following:

1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

Pay attention to before use:

1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance

2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it

3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）

4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line

5. Place the replacement blade onto the cup and screw it tightly until you have a good seal

6. Please make sure it in right place and locked tightly

7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

BEFORE PURCHASING you need to check your Old Blade to make sure the following,.

1) Count the FINS IT SHOULD BE 6-FINS.
2) The blade has FEMALE FINS
3) 4″ (10cm) Diameter.

BEFORE PURCHASING Please check all the images on this Product Detail page to make sure you are buying the right Blade for your Blender.

Warranty Policy
●All products sold by NLSD are covered by 3 months warranty.
●NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase.
●If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days.
●Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.

Blender Bottom Blade (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

KIND REMINDER BEFORE PURCHASE:

1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE

1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

The Pro Extractor blades replacement for Ninja QB3000 series are especially designed to tear through the toughest ingredients. Leafy greens, stems, seeds, frozen fruit–they don’t stand a chance. Powerful Pro Extractor blades break down tough ingredients so no nutrient is left behind.

Compatible with the following Nutri Ninja models:

• Nutri Ninja 2-in-1 (QB3000)
• Ninja Fit (QB3000SSW)
• Nutri Ninja 2-in-1 (QB3004)
• Nutri Ninja 2-in-1 (QB3005)

Replaces part number 476KKU3000.

Blade Dimensions: 3.4 inches (diameter) x 3 inches (height)

Amount of Fins: 5 fins

Package includes: 3 (three) pro extractor blade replacements.

Disclaimer: Not an OEM product. This is not a Ninja Kitchen original product. Any use of the Ninja Kitchen brand name, model or part designation for this product is made solely for purposes of demonstrating compatibility.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Ninja Blender Blade 5 Fin Assembly, eg:

• What are Top 10 Ninja Blender Blade 5 Fin Assembly for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Ninja Blender Blade 5 Fin Assembly to buy?
• What are Top Rated Ninja Blender Blade 5 Fin Assembly to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ninja Blender Blade 5 Fin Assembly?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ninja Blender Blade 5 Fin Assembly.
• Before deciding to buy any Ninja Blender Blade 5 Fin Assembly, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Ninja Blender Blade 5 Fin Assembly and What you should consider when buying the Ninja Blender Blade 5 Fin Assembly and Where to Buy or Purchase the Ninja Blender Blade 5 Fin Assembly. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Ninja Blender Blade 5 Fin Assembly of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ninja Blender Blade 5 Fin Assembly.