Best Pc Water Cooling Rigid Glass Tubing

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 255 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 210 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

EK-HDC Fitting is a more secure variant of the EK-HD Adapter fitting as it prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. The barb is made of nickel-plated CNC machined brass while the ring is made of black-chrome plated CNC machined brass and feature quality O-rings. These fittings are fully compatible with EK-AF series (45°/90°) angled adapters. Best practice is to install these fittings using Allen Key 9mm (not included, available for separate purchase).

Model: 3830046992574

Designed as the second generation of Monsoon’s popular line of Economy Fittings, EV2 features significant improvements in multiple areas including substantial improvements in resistance to tube pull out, reductions in tube wobble, and dual O-ring seals for improved leak prevention. The included tube sizing template allows you to select the exact ferrule and O-ring size needed for your tube regardless of the minor variations in outside diameters commonly found between various brands and even production batches of tube. Ferrules and O-rings are included to fit any tube O.D. between 11.8mm and 13.2mm so you can be confident that you are getting the best fit possible every build, every fitting, every time. The increased fitting height decreases the “tube wobble” commonly found with push in type fittings, and the decreased outside diameter (O.D.) improves compatibility with blocks that have narrow port spacing. The included wrench—which fits both compression ring and base—makes it even easier to install fittings in those hard to reach places. Sold as a 12-pack. For use with Monsoon rigid tubing only.

Model: EV2-1258-12-CH

PrimoChill is once again helping performance enthusiasts, case modders, and those in search of the “Next Best” thing in watercooling. PrimoChill Rigid PETG Tube is one step further in the evolution of computer watercooling enabling the user to make the tightest bends and straightest runs without the need of excessive compression fittings and 90 degree angle rotaries. The less your build requires the more time and money you save searching for the right fitting.

Measure – Cut – Bend – Install – DONE!
Comes in a variety of colors to fit your individual build.

Features

• Superior Strength to Acrylic Tubing
• Trusted/Experienced Brand
• Glass-like transparency
• Thicker Wall for safer operation
• 8 Vivid Colors to choose from
• Compatible with PrimoChill Rigid Fittings!
• Virgin PETG Material
• Proudly MADE IN THE USA

Specifications:

• Inner Diameter: 3/8in.
• Outer Diameter: 1/2in.
• Wall Thickness : 1/16in.

Warnings/Cautions:With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

PrimoChill is once again helping performance enthusiasts, case modders, and those in search of the “Next Best” thing in watercooling. PrimoChill Rigid PETG Tube is one step further in the evolution of computer watercooling enabling the user to make the tightest bends and straightest runs without the need of excessive compression fittings and 90 degree angle rotaries. The less your build requires the more time and money you save searching for the right fitting.

Measure – Cut – Bend – Install – DONE!
Comes in a variety of colors to fit your individual build.

Features

• Superior Strength to Acrylic Tubing
• Trusted/Experienced Brand
• Glass-like transparency
• Thicker Wall for safer operation
• 8 Vivid Colors to choose from
• Compatible with PrimoChill Rigid Fittings!
• Virgin PETG Material
• Proudly MADE IN THE USA

Specifications:

• Inner Diameter: 3/8in.
• Outer Diameter: 1/2in.
• Wall Thickness : 1/16in.

Warnings/Cautions:With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

PrimoChill is once again helping performance enthusiasts, case modders, and those in search of the “Next Best” thing in watercooling. PrimoChill Rigid PETG Tube is one step further in the evolution of computer watercooling enabling the user to make the tightest bends and straightest runs without the need of excessive compression fittings and 90 degree angle rotaries. The less your build requires the more time and money you save searching for the right fitting.

Measure – Cut – Bend – Install – DONE!
Comes in a variety of colors to fit your individual build.

Features

• Superior Strength to Acrylic Tubing
• Trusted/Experienced Brand
• Glass-like transparency
• Thicker Wall for safer operation
• 8 Vivid Colors to choose from
• Compatible with PrimoChill Rigid Fittings!
• Virgin PETG Material
• Proudly MADE IN THE USA

Specifications:

• Inner Diameter: 3/8in.
• Outer Diameter: 1/2in.
• Wall Thickness : 1/16in.

Warnings/Cautions:With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

PrimoChill is once again helping performance enthusiasts, case modders, and those in search of the “Next Best” thing in watercooling. PrimoChill Rigid PETG Tube is one step further in the evolution of computer watercooling enabling the user to make the tightest bends and straightest runs without the need of excessive compression fittings and 90 degree angle rotaries. The less your build requires the more time and money you save searching for the right fitting.

Measure – Cut – Bend – Install – DONE!
Comes in a variety of colors to fit your individual build.

Features

• Superior Strength to Acrylic Tubing
• Trusted/Experienced Brand
• Glass-like transparency
• Thicker Wall for safer operation
• 8 Vivid Colors to choose from
• Compatible with PrimoChill Rigid Fittings!
• Virgin PETG Material
• Proudly MADE IN THE USA

Specifications:

• Inner Diameter: 3/8in.
• Outer Diameter: 1/2in.
• Wall Thickness : 1/16in.

Warnings/Cautions:With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

Conclusion

By our suggestions above, we hope that you can found pc water cooling rigid glass tubing for you.Please don’t forget to share your experience by comment in this post. Thank you!