yesallevent 
Nowadays, there are so many products of water cooling pc chassis under 28 dollars in the market and you are wondering to choose a best one. You have searched for water cooling pc chassis under 28 dollars in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water cooling pc chassis under 28 dollars which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
- ???? Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
- ???? In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
- ???? For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
- ???? There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
- ???? RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the “source” fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
SM SunniMix Brushless DC Water Pump for PC Computer CPU Cooling System, Ultra Silent, DC 12V 500L/H 3.5M
- * – Support PWM speed measurement function, speed line can be directly inserted into the motherboard, small 4P terminal, small size and easy to use
- * – Using brushless DC circuit, using MCU control, high efficiency and energy saving, the maximum current for working is only 0.5A, the maximum flow is 500L/h, and the maximum lift is 3.5m.
- * – Full ceramic bearing design, durable, ultra-quiet design, its operating sound is only 25dB, using the popular G1/4 threaded interface, it is convenient for users to replace various nozzles
- * – This pump is compatible with all standard water cooling system settings. The lid nozzle is 1 in 1 and 1 out. You can select the inlet and outlet according to the chassis needs, which is convenient for installation.
- * – Perfect design, can effectively increase pump flow, reduce noise and vibration, use POM material, high hardness and toughness, safe and reliable
Description:
– – This pump is compatible with all standard water cooling system settings. The lid nozzle is 1 in 1 and 1 out. You can select the inlet and outlet according to the chassis needs, which is convenient for installation.
– – Perfect design, can effectively increase pump flow, reduce noise and vibration, use POM material, high hardness and toughness, safe and reliable
– – Using brushless DC circuit, using MCU control, high efficiency and energy saving, the maximum current for working is only 0.5A, the maximum flow is 500L/h, and the maximum lift is 3.5m.
– – Full ceramic bearing design, durable, ultra-quiet design, its operating sound is only 25dB, using the popular G1/4 threaded interface, it is convenient for users to replace various nozzles
– – Support PWM speed measurement function, speed line can be directly inserted into the motherboard, small 4P terminal, small size and easy to use
Specification:
– Maximum flow: 500L/h
– Maximum lift: 3.5m
– Maximum current: 0.5A
– Voltage: DC12V
– Power Port: 4P
– Speed measuring connector: support PWM adjustment
– Inlet/outlet nozzle: G1/4 thread
– Injection hole: G1/4 thread
– Working noise: 25dB
– Design life: 50,000 hours
– Bearing: ceramic bearing
Package Includes:
1Piece Water Cooling Pump
1Piece Foam Base
Note:
Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand,Thank you.
Diverse products; High quality; Best price; good customer Service; Fast transaction. We will give you a pleasant and satisfying shopping experience!
Vbestlife Molex Adapter Computer Chassis Fan, Water Cooling Fan Systems 12CM Fan 4 Line PWM Temperature Control Computer Case Fan
Specification:
Fan Size: about 120*120*25mm/4.72*4.72*0.98inch (PWM)
Rated Voltage: 12VDC
Working Voltage: 10.8~13.2VDC
Starting Voltage: 7VDC
Rated Current: 0.16±10%A
Input Power: 3W
Bearing Type: hydraulic bearing
Fan Speed: 700-1800±10% RPM
Maximum Air Volume: 74.5CFM
Noise: 18~35.2dB(A)
Package List:
1 * Fan
1 * 4Pin Line
4 * Small Screw
4 * Big Screw
D DOLITY Black DC 12V Ultra-Quiet Water Cooling Pump Tank max.500L/h for PC CPU Liquid Cooling System
- * – This pump is compatible with all standard water cooling system settings. The lid nozzle is 1 in 1 and 1 out. You can select the inlet and outlet according to the chassis needs, which is convenient for installation.
- * – Perfect design, can effectively increase pump flow, reduce noise and vibration, use POM material, high hardness and toughness, safe and reliable
- * – Support PWM measurement function, line can be directly inserted into the motherboard, small 4P terminal, small size and easy to use
- * – Full ceramic bearing design, durable, ultra-quiet design, its operating sound is only 25dB, using the popular G1/4 threaded interface, it is convenient for users to replace various nozzles
- * – Using brushless DC circuit, using MCU control, high efficiency and energy saving, the maximum current for working is only 0.5A, the maximum flow is 500L/h, and the maximum lift is 3.5m.
We sell 100% brand new and high quality products. You can get what you want here at a competitive price! Don’t hesitate, just buy it!
Description:
– – This pump is compatible with all standard water cooling system settings. The lid nozzle is 1 in 1 and 1 out. You can select the inlet and outlet according to the chassis needs, which is convenient for installation.
– – Perfect design, can effectively increase pump flow, reduce noise and vibration, use POM material, high hardness and toughness, safe and reliable
– – Using brushless DC circuit, using MCU control, high efficiency and energy saving, the maximum current for working is only 0.5A, the maximum flow is 500L/h, and the maximum lift is 3.5m.
– – Full ceramic bearing design, durable, ultra-quiet design, its operating sound is only 25dB, using the popular G1/4 threaded interface, it is convenient for users to replace various nozzles
– – Support PWM measurement function, line can be directly inserted into the motherboard, small 4P terminal, small size and easy to use
Specification:
– Maximum flow: 500L/h
– Maximum lift: 3.5m
– Maximum current: 0.5A
– Voltage: DC12V
– Power Port: 4P
– measuring connector: support PWM adjustment
– Inlet/outlet nozzle: G1/4 thread
– Injection hole: G1/4 thread
– Working noise: 25dB
– Design life: 50,000 hours
– Bearing: ceramic bearing
Package Includes:
1Piece Water Cooling Pump
1Piece Foam Base
Note:
Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand,Thank you.
Noctua NF-P14s redux-1500 PWM, High Performance Cooling Fan, 4-Pin, 1500 RPM (140mm, Grey)
- High performance cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 25.8 dB(A), >
- 150,000 h MTTF
- Renowned NF-P14s high-end 140x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
- Highly optimised low-noise design provides outstanding quietness of operation, excellent static pressure and strong airflow (CFM), square frame for water cooling radiators and chassis ventilation. Acoustical noise 25,8 dB(A)
- 1500rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)
- Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)
Noctua NF-P12, 3-Pin Premium Cooling Fan (120mm, Brown)
- Award-winning NF-P12 120x25mm fan with Nine-Blade Design and Vortex-Control Notches for superior quiet cooling performance.
- Pressure-optimised blade design provides high static pressure and strong airflow for air-based CPU coolers, water cooling radiators or low-noise case ventilation.
- 3-pin version provides 1300/1100/900rpm speed settings via Low-Noise Adaptors to fine-tune the fan for maximum airflow or near-silent operation.
- Includes anti-vibration mounts, fan screws, Low-Noise & Ultra-Low-Noise Adaptors, extension cable and 3:4-pin adaptor for powering the fan directly from the power supply.
The NF-P12 has been specifically developed for applications such as CPU coolers that demand superior pressure and airflow performance. Thanks to psychoacoustic optimizations like the Vortex-Control Notches, the new SCD drive system and Noctua’s premium-grade SSO-Bearing, the NF-P12 achieves exceptional quietness and long-term stability.
EZDIY-FAB 120mm RGB LED Case Fan for PC Cases, CPU Cooling Fan, Water Cooling Fan, Addressable RGB Case Fan with Controller- 5 Pack
- Using the inner frame design, the lighting effect is softer and colorful
- Rainbow color effect : Each of the 16 RGB LEDs, built directly into central circle of fan, are independent, unlocking unique customization and lighting effects
- Quiet Performance: Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency.
- RF wireless control : Can be connected with 6 120 mm RGB case fans synchronously with color change, intelligent color matching from wireless remote control
- Please note: The controller must be connected RGB fan to FAN 1st port then others. Only the LED is controllable, fan speed cannot be controlled.
Similar items with 4 stars and above
Liveday 1 Pcs 120mm PC Case Cooling Fan Compatible with Different Types of Chassis Super Silent Computer LED High Airflow Cooler Fans
- The standard 120mm computer case fan, compatible with the different types of chassis. High-performance fan for the CPU heatsink and water cooling system.
- The design is user friendly interface: a 3pin 4pin two interface design, compatible with any motherboard, power supply plug or other devices.
- Super Silent PC Heat Sink: all copper motor and rugged. hydraulic press bearings with self-lubricating antifriction material, reduce operating noise, improve efficiency, and run the noise less than 25 decibels.
- High-speed and high-brightness LED design, easy to install and improve airflow to maximize airflow for High capacity cooling, let your PC more durable.
- 33 LED chassis fan makes your computer very cool. This reduces the vibration between your chassis.
Feature:
The standard 120mm computer case fan, compatible with the different types of chassis. High-performance fan for the CPU heatsink and water cooling system.
The design is user friendly interface: a 3pin 4pin two interface design, compatible with any motherboard, power supply plug or other devices.
Super Silent PC Heat Sink: all copper motor and rugged. hydraulic press bearings with self-lubricating antifriction material, reduce operating noise, improve efficiency, and run the noise less than 25 decibels.
High-speed and high-brightness LED design, easy to install and improve airflow to maximize airflow for High capacity cooling, let your PC more durable.
Specification:
Single fan Size : 120mmx120mmx25mm/4.7in x 4.7in x 1in
Speed : 1200RPM±10%
Input Voltage : DC12V
Current (Ampere): 0.25A
Input (Watt): 3.0W +/- 10%
Bearing Type : Hydraulic Bearing
Noise : <25dB
Max Air Flow : 50.5CFM
Connector : big 4 Pin & 3 Pin
External Material : Plastic
LED: 33LEDs
Life Time: 30000Hrs
Cable length: 30cm / 11.8in
ASHATA Mini G1/4 Double Internal Thread Water Filter System,Water Cooling Accessories Special Designed for Small Chassis
- 2 ports built-in Hex wrench tightening method.
- Standard high-flow stainless steel filter.
- A replaceable accessory bag with high-filter stainless steel filter for users to replace.
- G1/4 double internal thread filter.More intuitive transparent viewing window design.
- This double internal thread filter is used for filtering impurities generated in Designed for small chassis, G1/4 double internal thread, equipped with high flow type filter, is best one of the joint collocation of water cooling system.
Specifications:
Weight: Approx.36g
Material: Brass
Filter specification: 30/60 mesh
Thread regulation: G1/4 (international common thread regulation)
Applicable wrench tool specifications: inch 3/8″ (without wrench tool included in the package)
Note:
1. The end with filter screen is a water outlet, the other end without filter screen is a water inlet.
2. The filter screen initially installed in the filter is suitable for primary filtration of the initial water cooling system. The filter aperture is larger, filtering the new row, cold head, water tank and other accessories in metal or plastic particles and impurities in the premise of not affecting the water flow. After the system is used for a period of time, can replace high filtration type filter in accessories bag, to avoid foreign body or impurities clogging cold head cause efficiency decline
Package Included:
2 x Double Filter
Cooler Master R4-C1DS-12FB-R1 MF120L Blue 12cm LED Damping Quiet Case Fan for CPU Cooler Water Cooling 120mm Fan Replaces (Blue)
The MasterFan MF120L, a new member of the MasterFan family, provides a targeted air cooling solution ideal for CPU coolers and chassis in-take fans at a favorable price. The MF120 L series includes five versions to choose from: RGB, blue LEDs, red LEDs, white LEDs, and colorless. It’s a perfectly crafted 7-blade fan design that cools your system in silence.
Features:
Silent Operation
Expert cooling without the noise. The ML120L series provides extreme silence without sacrificing performance. 4 pieces of rubber ring are came with the fan for better silent effect, while rifle bearing structure offer 280,000 hours long life and quite operating noise at 25dBA.
Blue LED
Low-profile BLUE LED, gives you bright and clean visual experience.
Outstanding Cooling
A balanced air flow and air pressure design maximizes heat reduction to keep your system cool and running smoothly.
Specifications:
Fan Dimensions: 120 x 120 x 25 mm (4.7 x x 4.7 x 1 inch)
Fan Weight: 90g (0.2 lb)
Fan Speed: 1200 ± 150 RPM
Fan Air Flow: 32 CFM ± 10%
Fan Air Pressure: 0.7 mmH2O
Fan Noise Level: 25 dBA
MTTF: 280,000 hours
L-10 Life: 40,000 hours
Bearing Type: Rifle Bearing
Power Connector: 3-Pin
Fan Rated Voltage: 12 VDC
Fan Rated Current: 0.37A
Power Consumption: 4.5W
Package and Contents:
1 x Cooling Fan
4 x Mounting Screws
Conclusion
By our suggestions above, we hope that you can found water cooling pc chassis under 28 dollars for you.Please don’t forget to share your experience by comment in this post. Thank you!
