Which Is The Best 100Mm Liquid Cooling Reservoir

Protium by Singularity Computers is a set of components for creating pump and reservoir combinations which increases performance, mounting options, flow inlet/outlet options and will be a feature in your build. Protium reservoirs have 7 ports for maximum loop design options. On one end is a low profile three port cap and on the other end a 90 degree quad port cap. The quad port cap allows for a hidden inlet/outlet configuration. Both caps have 3mm LED mounting positions to light up the coolant. Protium has an aluminum retention ring design allowing the caps to be rotated to face any direction, this is something we don’t often see and is vital for clean loop design. There is no acrylic on acrylic thread and the o-ring surface does not rotate onto the o-ring, this increases quality and reliability.

To create the Protium D5 Pump and Reservoir Combo you need
Protium D5 Pump Top.
Protium D5 Pump Cover
Protium Reservoir.
D5 Pump (Any Standalone D5 Pump)

To create a Protium DDC Pump and Reservoir Combo you need
Protium DDC Mod Kit
Protium Reservoir
DDC Pump

Features:

• Vastly increases inlet/outlet and loop design options
• Inlet/outlet positions at 90 degrees for a cleaner loop
• Caps can be rotated to face any direction
• O-ring surfaces do not rotate on the o-ring
• 7 ports. 3 port low profile cap and quad port 90 degree cap
• 3mm LED mounting positions on both caps
• Can be used standalone or with our pump components
• 16mm hardline compression fittings fit side by side and on all ports directly

Included Items:

• 60mm Acrylic Reservoir Tube
• Aluminum Retention Ring: x2
• 90 Degree Quad Port Cap
• Triple Port Cap
• 16mm Internal Tube
• G1/4” Stop plug: x5
• Silicon O-rings x2

Model: sc-protium-s-ba

PWM D5 Pump/Reservoir Combo 3-Port G 1/4″ Thread

New Clear design PC watercooling reservoir. Stylish and RGB AURA LED assembled.

By giving users ideal mounting, fitting and flow, this is the right choice for PC enthusiasts. Make your system a showcase for all to see with the Bykski combo.

100mm reservoir version combo dimension: 201mm x 81mm
150mm reservoir version combo dimension: 252mm x 81mm
200mm reservoir version combo dimension: 301mm x 81mm

Material: arylic + aluminum alloy
Maximum Load Speed: max 5000rmp
Maximum Flow Rate: 1100 L/Hr
Pump voltage: DC 12V
LED lights voltage: DC 5V
Pump lift: 3.8m
PWM speed control
The water cooling reservoir / tank has 4 G1/4 threads ports for water in or water out

What’s in the box?
1 x PC watercooling pump liquid cooling reservoir combo for computer water cooling system
2 x C-shape holder
1 x Mounting bracket to fix this water cooling reservoir pump combo on radiator or PC case
4 x Water caps
One pack of mounting screws

Material: PMMA + Aluminum
Colour: Black & clear
Ports: G1/4″ thread
Outter Diameter: 66mm
Inner Diameter: 57mm

Package includes:
Cylinder Reservoir x 1pcs
C-shape Holder x 2
L-shape Brackets x 2
Installation screws x 1 pack
Brass Plug Stopper / Water Cap x 2pcs

Watercool colored interchangeable struts are a easy way to customize your Watercool HEATKILLER Tube Series reservoir. The struts are made from solid aluminum. The colored versions have a high end anodically oxidized finish. Delivery includes four struts. One of them is designed to hold a LED strip. Corresponding LED strips are available separately. Please be careful to choose the correct strut length for your tube. The name of your HEATKILLER Tube Series tells you its length, for example a HEATKILLER Tube 100 requires 100mm long struts.

Model: 30238

The Alphacool Cape Coolplex reservoirs have been well-known and popular on the water cooling market for years! But even such great products can sometimes use an update to fulfill even the most recent demands. Hence we at Alphacool have let the old series run out and now introduce the new series with POM end pieces as “LT” and now even with solid metal end pieces as the “Copper Edition”. Of course the tubes are made from high-grade Plexiglas which has proven itself with safe operation in many cooling systems for many years! The changes made are subtle but very well thought through: Besides the new materials and surface finishes the top piece of the reservoirs is now equipped with an additional thread, making them great for installation of a Fillport. Additionally the reservoir can now also be installed horizontally! The riser tube is now removable for applications where the top of the reservoir is used as an inlet. A nice side effect: Now even more lighting modules can be installed for beautiful lighting effects. To round off the new concept the screw plugs on all versions now have an elegant polished copper surface finish! For maximum compatibility all threads are G1/4” in size. The proven transparent mounts are now also included again for almost invisible mounting. Make your PC a piece of art with the new Cape Coolplex reservoirs! Technical specifications: Material: POM, Plexi Height: 100mm Diameter: 50mm Connection threads: G1/4″ Weight: 264g Extent of delivery: Reservoir 2x Mounting clamps 2 x G ¼” Screw plugs Please note: For mounting additional screws are needed. We recommend ordering item No. 46023 with this reservoir. This product has been reviewed for you: Hardwareoverclock Ocreviews (PT)

The Monsoon Modular Reservoir System allows you to configure exactly the reservoir you need for your build—no more forcing your build to fit around an off the shelf, one-size-fits-all reservoir. All of the components are offered individually allowing you to mix and match different end caps, couplers, tension rods, tube lengths, mounting options, fill and drain ports, pump options, and lighting. The MMRS Acrylic tube is 60mm in diameter with lengths available from 50mm to 300mm in 50mm increments (matched with tension rod lengths).

Model: MMRS-AT-100-UVG

Specification:

Item Type: Water Tank
Outer Diameter of Water Tank: Approx. 4.5cm / 1.8in
Water Tank Size: Approx. 100mm / 3.9in
Water Tank Capacity: 140ml
Size: 3 holes are G1/4 inner thread
Accessories: The water tank only contains 2 half hoops (without any joints and water cooling stopper)

Package List:

1 x Water Tank2 x Half Hoop2 x Screw2 x Nut

The Monsoon Modular Reservoir System allows you to configure exactly the reservoir you need for your build—no more forcing your build to fit around an off the shelf, one-size-fits-all reservoir. All of the components are offered individually allowing you to mix and match different end caps, couplers, tension rods, tube lengths, mounting options, fill and drain ports, pump options, and lighting. These are CCFL light tubes that you can mount inside the MMRS reservoir via any suitable G1/4″ port. The plug is machined from brass and includes a machined brass cap that allows you to remove or replace a CCFL bulb without the need to drain your reservoir. The tube is polycarbonate for extra durability and has a molded polycarbonate end cap that is ultra sonically welded to the tube. The other end is O-ring sealed and bonded into the brass plug base. Sleeved in premium black sleeving they also feature industry standard two pin connectors in black.

Model: CCFL-PLG-100-GR-GR

The Monsoon Modular Reservoir System allows you to configure exactly the reservoir you need for your build—no more forcing your build to fit around an off the shelf, one-size-fits-all reservoir. All of the components are offered individually allowing you to mix and match different end caps, couplers, tension rods, tube lengths, mounting options, fill and drain ports, pump options, and lighting. The MMRS Dual bulb CCFL light is designed to work with Monsoon’s Modular Reservoir System 25mm and 50mm mounts(part numbers MMRS-MT-25MM and MMRS-MT-50MM respectivel). They feature 6 mm diameter colored acrylic lenses over bright white bulbs so you get light that is bright and very color correct—red light that is actually a deep red rather than pink for example. Lights are matched to reservoir tube segment lengths—for example if your reservoir configuration has 100mm and 150mm segments, you will need 100mm and 150mm lights. The power cable is sleeved in premium triple strand triple weave sleeving, has a black plug, and is approximately 20” or 500mm.

Model: MMRS-CCFL-100-UV

Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The “Alphacool Eisschicht” offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Conclusion

By our suggestions above, we hope that you can found 100mm liquid cooling reservoir for you.Please don’t forget to share your experience by comment in this post. Thank you!